Ads Forum - Expanded Thread Page

Subject: Loader mounting plate

[Back] [Return to Top of Forum]

poderac    Posted 04-02-2017 at 13:16:18 [URL] [DELETE]        [Reply] [Email]  
  • Loader mounting plate
  • Can anyone help me find a pair of mounting plates for a 730 series loader, part # 291445. It is for mounting the loader on the rear axle on a 3000 series tractor. I need both plates and the 7 in. plow bolts that go with them.

    Sammy    Posted 04-03-2017 at 14:48:13 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Loader mounting plate
  • Try Fastenal. This where I bought them when I put a loader on a 8n.

    poderac    Posted 04-03-2017 at 15:49:25 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Loader mounting plate
  • Thanks, but I don't want to pay Fastenal 70.00 for 2 bolts to go in an 8 dollar plate, especially twice.

    poderac    Posted 04-03-2017 at 06:48:09 [URL] [DELETE]        [Reply] [Email]  
  • Re: Loader mounting plate
  • Actually, I could buy the plates on line if you or another member has 4 ea. 5/8 X 7 plow bolts they would sell reasonably.

    Charlie (IN)    Posted 04-03-2017 at 00:34:09 [URL] [DELETE]        [Reply] [Email]  
  • Re: Loader mounting plate
  • do you have a picture of them ? I might have them. Have a few different ones.
    Text me pictures if possible - 219-707-9145

    poderac    Posted 04-03-2017 at 06:36:39 [URL] [DELETE]        [Reply] [Email]  
  • Re: Loader mounting plate
  • I don't have a picture. I can't find a PDF of the manual on the internet. The loader is too short to fit a 3000. They made a rectangular plate to extend the loader far enough to bolt to the back axle. It takes 7 inch plow bolts to mount it. The plate is on the web very cheap, but I cannot find the plow bolts anywhere near reasonable.
    The plats is approx. 4 in. wide by 8 in. long, by 1/2 in thick.

    Ed Gooding    Posted 04-03-2017 at 16:49:19 [URL] [DELETE]        [Reply] [Email]  
  • Re: Loader mounting plate
  • We do have the owner's manual for your 730 loader in here our Manuals / Implements / Loaders library.

    Hope this helps.....Ed

    poderac    Posted 04-04-2017 at 07:47:03 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Loader mounting plate
  • Thanks, Ed. I've been using it. Sure would be nice if someone would donate a parts manual to go with it.

    [Back] [Return to Top of Forum]