Ads Forum - Expanded Thread Page

Subject: air cleaner parts

[Back] [Return to Top of Forum]

abraham    Posted 11-03-2020 at 07:53:42 [URL] [DELETE]        [Reply] [Email]  
  • air cleaner parts
  • I have a recently purchased 1946 2N #9N229502
    I am in need of an air cleaner cover and screen.
    Shop manual shows part numbers of 8N9602C2 or C3 cover
    9N9619C1,C2 or C3 for screen

    Anyone have one to sell or know of a source?
    I have checked links but did not see anything for cover and screen.
    Also would like to know what C1,C2,C3 designates
    Thank you.

    John in Mich    Posted 01-21-2021 at 08:20:00 [URL] [DELETE]        [Reply] [Email]  
  • Re: air cleaner parts
  • Is/was yours the domed shape or the flatter shape? I may have the latter available. My e-mail is open.
    BTW, I had a tractor years ago missing the same parts. I got an airfilter for a 10 HP Kohler engine like my '71 Ford lawn tractor, set it in place of the screen and then installed a electrial junction box cover and a wing nut. I did have to drill a center hole in the cover. Remember, necessity is the mother of invention.

    abraham    Posted 11-06-2020 at 07:07:20 [URL] [DELETE]        [Reply] [Email]  
  • Re: air cleaner parts
  • Thank you Tim

    Tim Daley(MI)    Posted 11-06-2020 at 06:56:46 [URL] [DELETE]        [Reply] [No Email]  
  • Re: air cleaner parts
  • If you can come up with mesh screen, you may consider to install the OEM CYCLONE AIR PRECLEANER for the 9N. Here is one on ebay now...just need to buy the jar, bail, and rubber gaskets from Dennis Carpenter...

    Tim Daley(MI)

    Tim Daley(MI)    Posted 11-06-2020 at 05:24:26 [URL] [DELETE]        [Reply] [No Email]  
  • Re: air cleaner parts
  • What happened to the old air cleaner cover and screen? Any part with an '8N' prefix wouldn't be for a 9N/2N, usually, and the air cleaner is one. S/N doesn't mean much anymore as engine may have been swapped out. The s/n was hand stamped on the engine AFTER it was assembled and passed QC Inspection/Testing. S/N's were meant to also ID the entire vehicle, car, truck, tractor, buggy, but as stated, swapping out didn't mean the rest of the tractor was correct for that unit - you often see an 8N engine block in a 9N and vice-versa so - a s/n basically moot point. I covered your questions about p/n nomenclature on the N-BOARD. I used the air cleaner as an example before I even saw this post. You Nobody makes new air cleaner screens and cap parts for the 9N so you need to find a used one like on fleabay. There are often a few sellers that part out tractors and you can get one there -look for 'marty' in Bad Axe, MI for one. Get out your MPC's and see if your tractor has one of the ones shown in the JAN 46 MPC.


    Tim Daley(MI)

    [Back] [Return to Top of Forum]


    Top