Implements Forum - Expanded Thread Page

Subject: 12B plow Tail wheel

[Back] [Return to Top of Forum]

Kirk-NJ    Posted 03-10-2015 at 07:20:52 [URL] [DELETE]        [Reply] [Email]  
  • 12B plow Tail wheel
  • I picked up an old 12B plow. The tail wheel assembly is different than on my other ferguson plows. My question is was there ever any other tail wheel assembly. the one on my 12B does not move up and down and the scraper is in the front of the wheel.

    Kirk

    Scott PA    Posted 03-10-2015 at 20:22:04 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 12B plow Tail wheel
  • They should have the scraper on the rear, they did use different wheel dishes and up and down pivot landside mounting brackets over the years.

    Kirk-NJ    Posted 03-11-2015 at 14:39:27 [URL] [DELETE]        [Reply] [Email]  
  • Re: 12B plow Tail wheel
  • Hello Scott,
    Here is a photo of the tail wheel assembly, scraper is forward of the wheel and bracket is one piece with no pivot point. I'm Assuming this is not a ferguson tail wheel and has been replaced with some other brand.

    Kirk

    Scott PA    Posted 03-11-2015 at 22:29:16 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 12B plow Tail wheel
  • It was changed to a Dearborn/Ford tailwheel.

    Kirk-NJ    Posted 03-12-2015 at 04:13:23 [URL] [DELETE]        [Reply] [Email]  
  • Re: 12B plow Tail wheel
  • At least it's in the same family and not JD or IH. Thanks Scott

    Kirk

    [Back] [Return to Top of Forum]


    Top