N Board Forum - Expanded Thread Page

Subject: 2n Hydraulics Problem (Revisited)

[Back] [Return to Top of Forum]

Lenny    Posted 02-27-2017 at 15:22:45 [URL] [DELETE]        [Reply] [Email]  
  • 2n Hydraulics Problem (Revisited)
  • I had asked you guys for advice back late last year on my 2n Hydraulics not aorking or appearing to even try. I did get the top cover off and torn down while home once but didn't see anything really terrible on the lift cover part of the system.

    I'm heading home in a few weeks and plan on dropping the pump out next.

    I've decided to give it the full rebuild and see various "kits" out there from various places.

    Where would you guys purchase a complete kit as possible to rebuild the hydraulics both the lift cover and the pump? I am also going to need the control valve as I do have a small chunk knocked out of the inner end's radius.
    I've found Steiner Tractors, Just 8ns, ebay, Yesterdays tractors.
    But I really want to buy from someone that supports or joins these forums with interaction if possible.
    Thanks for all,
    Lenny

    AL CT    Posted 02-27-2017 at 17:22:02 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 2n Hydraulics Problem (Revisited)
  • As Jack said below. Just8N's would be my choice. I think they will actually rebuild the pump for you, check with them if that is an option you're thinking about.

    Jack - Iowa    Posted 02-27-2017 at 17:03:45 [URL] [DELETE]        [Reply] [Email]  
  • Re: 2n Hydraulics Problem (Revisited)
  • Lenny,

    You will get a lot of referrals to Just 8n's http://www.just8ns.com/

    I've also used Grand Valley Tractor http://www.grandvalleytractor.com/

    In my opinion they both do a good job.

    Undoubtedly there are others but this is as far as I would go.

    Good Luck,

    Jack

    [Back] [Return to Top of Forum]


    Top