N Board Forum - Expanded Thread Page

Subject: Mower Adjusting Rack

[Back] [Return to Top of Forum]

Del Huebner    Posted 03-05-2017 at 12:24:37 [URL] [DELETE]        [Reply] [Email]  
  • Mower Adjusting Rack
  • If anyone needs a rack like this for your Ferguson A-EO-B20 rear mounted mower or a Dearborn 14-1 or 14-2 mower I can make a template while I have these off and mail it to you. The metal stock is 1/16". I am sure they could be cut out by the people that t do this sort of fab work. The top link used is the standard original top link used on the Ford and Ferguson tractors.

    Tim Daley(MI)    Posted 03-05-2017 at 15:22:46 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Mower Adjusting Rack
  • Yes, like ALCT says, the adjusting rack was used on the Ferguson ABO-21 pull type disc harrows, maybe other implements as well, but mostly for pitch adjusting. I too also own about a half dozen of them.

    Tim Daley(MI)

    Rustyal    Posted 03-05-2017 at 19:24:30 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Mower Adjusting Rack
  • Never seen that style disc. Not with the bottom three point hitch attachment like that.

    AL CT    Posted 03-05-2017 at 15:06:25 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Mower Adjusting Rack
  • The Ferguson 2 gang harrow I had used the adjustment rack as shown. They would allow angle change on the harrow. I was not aware they were also used with any Ferguson mower.

    John in Mich    Posted 03-05-2017 at 13:40:17 [URL] [DELETE]        [Reply] [Email]  
  • Re: Mower Adjusting Rack
  • I have a couple of those top links with the rack and I do not have a mower. My e-mail is open if anyone is interested.

    [Back] [Return to Top of Forum]