N Board Forum - Expanded Thread Page

Subject: Ferguson light question

[Back] [Return to Top of Forum]

Doug Siperly    Posted 03-07-2017 at 20:15:01 [URL] [DELETE]        [Reply] [No Email]  
  • Ferguson light question
  • Does anyone here have a good picture of headlights and work lights for early Ferguson tractor. I found some headlights and work lights hiding in my storage and know they are not ford, I think they may be for a Ferg. Thanks for any help. Doug

    Tim Daley(MI)    Posted 03-08-2017 at 07:51:58 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Ferguson light question
  • Yep, the lights Del shows are the Ferguson headlights made by the CM HALL Co; Detroit, MI and should have their logo stamped by the ball socket pivot base on the shell. The logo should be HALLAMP in an oval. You can identify the HALLAMP lights used on Ferguson Tractors (not FORD)by the two bezel screws 180 apart as shown and the logo stamp. These were used by Ferguson exclusively for several years. FORD used CM HALL early on for the large truck style headlights on 9Ns, then came out with their own on later 2Ns and soon the sealed beam lamp was invented and everyone went to that style. CM HALL was the only approved vendor to Ford to supply the 8N-15500 Implement Lamp too. Their units were almost identical to the ones Ford produced at their Flat Rock Lamp Factory and carried their CM HALL diamond stamp logo. This was different from the later HALLAMP logo used on the Ferguson Tractors, but still the same company. I have some Ferguson lights, restored, to part with if anyone is interested. I have headlights, TAURUS taillights, HALL taillights, and a HALLAMP worklight.




    -note -only used on Ford Tractors...

    Tim Daley(MI)

    Del Huebner    Posted 03-07-2017 at 20:29:40 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Ferguson light question
  • Doug, I do not have anything on the work light but I did bring back a set of original Ferguson headlights a few years back. Here is a picture of them broke down. If you would like more pictures let me know and I will post them.

    Doug Siperly    Posted 03-07-2017 at 21:49:42 [URL] [DELETE]        [Reply] [Email]  
  • Re: Ferguson light question
  • Thanks for the picture, thats the ones I have. The work lights I have a smaller dia. than the Ford one and no switch on them. the search goes on!! Thanks again!

    Bruce(OR)    Posted 03-08-2017 at 07:23:24 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Ferguson light question
  • Just checked the '73 edit of the Fergy parts manual. Work lite had the toggle switch also. Looking at the MF 35 it finally got vague enough to possibly not have the toggle switch on that work light.

    Doug siperly    Posted 03-08-2017 at 20:17:24 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Ferguson light question
  • Thanks all for the info, maybe I will take some pictures of the work lights, and some might know what they are.

    [Back] [Return to Top of Forum]