N Board Forum - Expanded Thread Page

Subject: Brake cam shaft

[Back] [Return to Top of Forum]

rod (MI)    Posted 03-13-2017 at 21:27:19 [URL] [DELETE]        [Reply] [Email]  
  • Brake cam shaft
  • Newbie here. I had to replace the axle seal on my Jubilee. I replaced the brake shoes and all the seals. My problem is the brake rod (8N-2247) is sloppy in on the trumpet, it falls out of it. Is this the way it should be or is there a bushing in the axle trumpet.

    Bruce(OR)    Posted 03-15-2017 at 08:08:57 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Brake cam shaft
  • Welcome to the board!
    8n Parts manual shows the Bushing, Brake Camshaft as part of the Bracket, Brake Camshaft. That bushing has a p/N 9N-2227-A. Might have slipped out and is rolling around inside the drum?

    [Back] [Return to Top of Forum]