N Board Forum - Expanded Thread Page

Subject: Ford 19-97 loader install help on '53 Jubilee

[Back] [Return to Top of Forum]

Scott F    Posted 05-03-2017 at 10:09:23 [URL] [DELETE]        [Reply] [Email]  
  • Ford 19-97 loader install help on '53 Jubilee
  • Hi there,

    Several years ago I acquired a 1953 Ford Jubilee. A few days ago I acquired a Ford Loader model 19-97. The hydraulic pump is attached to the loader, but none of the other parts needed to mount the loader to the tractor were included with the loader.

    I'm having a harder time than expected tracking down these parts, specifically the brackets and plates for the front and rear. It seems like I'll be able to piece together the pump parts (drive shaft, drive hub, etc.). What I can't seem to find are the "non mechanical" parts that actually attach the loader to the tractor.

    Does anybody have this loader attached to an NAA, 600 series, or 800 series tractor that could send me some pictures of the front end and rear axle to give me an idea of how this thing comes together? And possibly a lead on some of the parts? Or schematics to have them made?

    I appreciate any help you can provide!

    TheOldHokie    Posted 05-03-2017 at 10:51:17 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Ford 19-97 loader install help on '53 Jubilee
  • The assembly instructions should have what you want. The pump was not originally attached to the loader - it was attached to the front mounting bracket.

    he NAA is going to be a "special case" but the basic hundred series parts diagram would be a good starting point for making what you need.

    TOH

    Ford 19-97 Assembly and Operating Instructions

    Scott F    Posted 05-05-2017 at 08:11:30 [URL] [DELETE]        [Reply] [Email]  
  • Re: Ford 19-97 loader install help on '53 Jubilee
  • Thanks TOH.

    I did have the manual and was encouraged to see that the NAA, 600,and 800 series all used the same mounting parts. I figured that would make them a bit easier to find.

    If anybody has any leads on where I may be able to get these mounting brackets, or have them made for a reasonable price - please let me know. I appreciate any help you can provide.

    I live in Upstate NY and would be happy to make a day trip to pick them up if necessary.

    TheOldHokie    Posted 05-03-2017 at 10:55:26 [URL] [DELETE]        [Reply] [No Email]  
  • PS>
  • After looking at the manual it seems teh NAA used the same bracket kit as teh Hundred series.

    TOH

    [Back] [Return to Top of Forum]


    Top