N Board Forum - Expanded Thread Page

Subject: Inherited tractors and implements

[Back] [Return to Top of Forum]

Kyle    Posted 08-09-2017 at 21:23:14 [URL] [DELETE]        [Reply] [Email]  
  • Inherited tractors and implements
  • Hello all! My father inherited some tractors and implements and he is thinking about selling them or restoring them. He was curious about the value or if anyone would even want them. Thank you for your time! Located in NW ohio. Machines from Cleveland area.

    1940 9N 1929.325
    1947 8N-6015-G

    I also have pictures I can email if anyone is interested. They are not functioning as far as I know.

    Kyle    Posted 08-15-2017 at 03:51:35 [URL] [DELETE]        [Reply] [Email]  
  • Re: Inherited tractors and implements
  • Plow info:
    Dearborn Farm Equipment
    Model 10-1
    Serial # 30344

    Brush Hog
    Serial # 55297

    Smaller tractor numbers are not very legible.
    Looks like it could be 2N

    2N 01 14 42
    12 19 43 directly under it

    I could not find additional info on any of the other equipment
    There is additional markings on the tractors if needed

    The Rims and tires look to be in good shape except for the small front rims/tires on the 2N
    8N ran last - 7 years ago
    2N 9 years ago.
    I do not know of any reason they do not run. All parts are there or available.

    Please email me at Kyle.wensinger@gmail.c o m if you are interested in these . Thank you everyone for all of the info , I think he is going to sell them.

    Rustyal    Posted 08-11-2017 at 19:48:57 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Inherited tractors and implements
  • The plow looks pretty good. Most have problems when you look closely. They sell pretty good in this area.

    Tim Daley(MI)    Posted 08-12-2017 at 04:38:20 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Inherited tractors and implements
  • the plow has a welded back moldboard, many of this type do, they broke easily...and, they are no longer serviced, meaning forget about trying to buy new parts, they just ain't made any longer...

    Tim Daley(MI)

    Andy B(MI)    Posted 08-10-2017 at 23:17:34 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Inherited tractors and implements
  • Do the tractors run? I'd say probably $1000-$2000 depending on tires and whether or not they run.

    Tim Daley(MI)    Posted 08-10-2017 at 17:08:40 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Inherited tractors and implements
  • Now that we can see your pictures, I see an 8N Tractor and a Dearborn Moldboard (Prior Model) Plow, but that other tractor is a 2N model -note oval tube radius rods, not present til 1944, and also take note that ALL standard 9N and 2N tractors used the "9N" prefix in the serial numbers. What is the model number on the plow and is there a tag on the brush hog? I may be interested if price is right...

    Tim Daley(MI)

    Kyle    Posted 08-10-2017 at 14:08:15 [URL] [DELETE]        [Reply] [Email]  
  • Pictures
  • https://ibb.co/dW1O4v

    Tim Daley(MI)    Posted 08-10-2017 at 16:03:08 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Pictures
  • Kyle-
    You can't do that here. You need an image sharing hosting service like IMGUR in order to link pictures on this site. Once you open a free account there, you can upload your photos there, but you're still not done. From the storage site you have to open each photo and copy the DIRECT html link then paste it into your post here. We have instructions in our HOW-TO's forum too...

    Tim Daley(MI)

    Tim Daley(MI)    Posted 08-10-2017 at 17:01:56 [URL] [DELETE]        [Reply] [No Email]  

  • Tim Daley(MI)

    p    Posted 08-10-2017 at 16:16:24 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Pictures
  • I highlight the link, right click, and click on "open new tab". The photos come in just fine.

    Tim Daley(MI)    Posted 08-10-2017 at 16:47:42 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Pictures
  • Yeah, I can get there by highlighting the url link, pasting into my browser, then once image is there, right click on it to select properties then paste it here...LIKE THIS:

    Tim Daley(MI)

    K.LaRue-VA    Posted 08-10-2017 at 11:05:15 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Inherited tractors and implements
  • Around here (central VA), most used implements are so abused and beat up they are basically worthless. Anything in good condition is so expensive, most people just buy new. New implements are generally not made nearly as strong as the old ones, but new and shiny sells better. I've bought and sold a few 2-bottom plows that were in decent shape for around $350. My big 2-gang disc plow was basically free, but I had to weld the frame back together to make it usable. Running N-tractors generally sell between $1000 to $2500, but at the high end of that range, you can get decent NAA, 600, 800, or Thousand series tractors.

    Tim Daley(MI)    Posted 08-10-2017 at 04:40:07 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Inherited tractors and implements
  • HiYa Kyle-
    You do not have the correct area for serial numbers. The 6015-G is a casting number for example. Go to the site given below in the LINK provided to read more on how to identify your make and model year. The 9N, 2N, and 8N serial numbers are hand stamped on a cast boss on the engine block, to the right of the oil filter housing and where the head mates to the deck. It will have a STAR (*) symbol before and after the s/n. Later 8Ns used a DIAMOND (<>)symbol. SEE HERE:

    Tim Daley(MI)

    Rustyal    Posted 08-09-2017 at 22:38:19 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Inherited tractors and implements
  • Someone will want them. Can't say what they may be worth without know more about them.

    clayton ingmire    Posted 08-09-2017 at 21:53:43 [URL] [DELETE]        [Reply] [Email]  
  • Re: Inherited tractors and implements
  • your 9n serial number has one to many numbers might be a star not a number put a little oil on the block it might highlite the serial number better

    [Back] [Return to Top of Forum]