N Board Forum - Expanded Thread Page

Subject: Throttle adj.

[Back] [Return to Top of Forum]

Rich    Posted 09-20-2017 at 05:16:16 [URL] [DELETE]        [Reply] [No Email]  
  • Throttle adj.
  • Is there a way to increase the resistance of the throttle lever so that it stays in place on my 9N? The lever won't stay in place and it will slide down towards idle. I have to slide the lever all the way down to full and lock it past the stopper so that I can mow.

    JMOR    Posted 09-20-2017 at 08:59:21 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Throttle adj.
  • The governor compensating spring in the "Am I missing a srping" thread is important in holding throttle position.

    Farmer Dan    Posted 09-20-2017 at 19:04:16 [URL] [DELETE]        [Reply] [Email]  
  • Re: Throttle adj.
  • I'm not totally sold on that compensating spring yet. I did fine with out it for so many years. But then I guess Henry wouldn't put it there if it didn't do something.

    Farmer Dan    Posted 09-20-2017 at 08:10:14 [URL] [DELETE]        [Reply] [Email]  
  • Re: Throttle adj.
  • Some guys will use a file to cut the groove back into the throttle stops. On the back side of the throttle lever there is a sharp edge that fits into the grooves you made need to dress that also.

    [Back] [Return to Top of Forum]