N Board Forum - Expanded Thread Page

Subject: 2n hydralic fluid

[Back] [Return to Top of Forum]

rick martin    Posted 10-08-2017 at 12:45:02 [URL] [DELETE]        [Reply] [Email]  
  • 2n hydralic fluid
  • Just wondering if 303 marked fluid will work in an 1945 2n????,,,I've heard that 80-90 will work that is marked yellow metal safe????....Thanks for all your help with this

    Tim Daley(MI)    Posted 10-08-2017 at 18:36:20 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 2n hydralic fluid
  • We have a ton of info in our HOW-TO's forum Ricky. Here's one on hydraulic oil...


    Tim Daley(MI)


    PS: Just to point out that Case/New Holland now no longer makes/stocks the original Ford MC134D oil. They sell a universal synthetic based oil made for the newer tractors. The guy told me it will work in the old Fords as well...but At $95 per gallon best to stick with bargain brands anyway.

    TheOldHokie    Posted 10-08-2017 at 13:18:35 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 2n hydralic fluid
  • UTF type fluids are fine for use in your 2N. However I would avoid the "303" branded UTF's as they are the lowest possible quality imaginable and are not suitable for use at temperatures below 32F. Stick to a more premium type product like TSC's Premium Universal Tractor Transmission fluid. I am not hawking the TSC product - it is just a readily available example and there are plenty of other brands that will perform just as well and cost roughly the same. NAPA, Walmart, Sam's Club. Blair. etc. all have their own house brands. The premium UTF's are well worth the $10-$15 extra it will cost for a 5 gallon pail.

    If you want to use an SAE 80W90 gear oil that will also work fine. The hype about yellow metal safe is pure FUD when it comes to an N-series tractor.

    TOH

    rick martin    Posted 10-08-2017 at 13:52:50 [URL] [DELETE]        [Reply] [Email]  
  • Re: 2n hydralic fluid
  • Thanks for taking the time to reply,,,,all advice is well taken,,,,thanks again

    Bruce (VA)    Posted 10-08-2017 at 12:55:19 [URL] [DELETE]        [Reply] [Email]  
  • Re: 2n hydralic fluid
  • Don't worry about the yellow metal. You're not driving a 911 Porsche. Your tractor isn't going to turn enough rpm's or generate sufficient heat to cause a problem.

    See tips 3 & 4.

    rick martin    Posted 10-08-2017 at 13:07:34 [URL] [DELETE]        [Reply] [Email]  
  • Re: 2n hydralic fluid
  • Thanks Bruce for the great advice and the 75 tips,,this helps a lot!!!

    [Back] [Return to Top of Forum]


    Top