N Board Forum - Expanded Thread Page

Subject: 800 top cover adjustment same as in NAA document?

[Back] [Return to Top of Forum]

Larry Wyant    Posted 01-23-2018 at 19:07:57 [URL] [DELETE]        [Reply] [Email]  
  • 800 top cover adjustment same as in NAA document?
  • Hello all,

    Recently I bought a Ford 800, about a 57 model. I need to know if the top cover adjustment procedure in the "NAA-Hyd-Ctrl-Adjustment.pdf" in the "How To" section of this site, will work for my 800?

    Obviously, I do not have the Ford special tools, so I am hoping all of the homegrown tools, like the key stock, and the procedure laid out, will also work on my 800.

    Thanks,
    Larry W.

    ZANE    Posted 02-01-2018 at 21:38:25 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 800 top cover adjustment same as in NAA document?
  • PREPARING AND ADJUSTING THE HYDRAULIC LIFT OF THE

    NAA and Hundred series including the 4 cylinder 2000 and 4000 hydraulic lift.

    Also includes the Dexta lift as it is the same as the hundred series.

    Booklet including text and pictures and feeler gauge with a replacement cam follower pin.

    Payment can be made by sending a money order, a personal check or the use of Paypal in the amount of $40.00 And I will ship to your address UPS or US mail if to a PO box.

    BE SURE TO INCLUDE THE MODEL OF YOUR TRACTOR IN THE ORDER.

    The money order will be shipped the first working day after receipt and the personal check will be shipped after it clears the bank.

    I also accept PayPal. wzsherman@aol.com

    Send payment to-
    Zane Sherman
    2824 Renfroe Road
    Talladega Al. 35160
    Phone 256 268 2327

    Email address wzsherman@aol.com

    Dean    Posted 01-23-2018 at 21:14:41 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 800 top cover adjustment same as in NAA document?
  • Follow the "alternative Procedures" in the I & T FO-20 manual. No special tools required. If you run out of threads on the turnbuckle, replace the draft control fork.

    Not familiar with the NAA document that you refer to but the NAA lift cover is not the same as that used on the 6789** tractors.

    Dean

    Larry Wyant    Posted 01-23-2018 at 22:47:43 [URL] [DELETE]        [Reply] [Email]  
  • Re: 800 top cover adjustment same as in NAA document?
  • Dean,

    Thanks for the hint. I'll order up a copy of the I & T FO-20 manual.

    Thanks,
    Larry W.

    [Back] [Return to Top of Forum]


    Top