N Board Forum - Expanded Thread Page

Subject: 8N rear wheel

[Back] [Return to Top of Forum]

jeff walker    Posted 02-11-2018 at 00:02:41 [URL] [DELETE]        [Reply] [Email]  
  • 8N rear wheel
  • Will the rear wheels from 8N and 35 Ferguson interchange, are the bolt patterns the same?

    Tim Daley(MI)    Posted 02-11-2018 at 07:00:55 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 8N rear wheel
  • I concur with Kirk -they should interchange. It's not the rims/wheels though, it will be the center discs. The Ford 28" 8N center discs are completely round. The Ferguson center discs are scalloped-a good visual method to tell. Ford went to the scalloped centers later on the Hundred Series models, why, I don't know. All use the 8-hole bolt pattern. I'd measure them first if looking, both the OD and the bolt hole pattern. I can post a formula to measure bolt hole patterns with if you need...

    Tim Daley(MI)

    Jim    Posted 02-13-2018 at 05:28:55 [URL] [DELETE]        [Reply] [Email]  
  • Re: 8N rear wheel
  • Tim, please post the formula to measure bolt hole patterns if you will. Thanks

    Dean    Posted 02-11-2018 at 11:08:27 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 8N rear wheel
  • The bolt pattern is the same and they will bolt on.

    The stud/nut size is slightly different so the wheel nuts will not interchange.

    Dean

    Tim Daley(MI)    Posted 02-11-2018 at 18:00:55 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 8N rear wheel
  • Seems I recall Ford used the 5/8-18 UNF threaded studs and Ferguson used the 9/16 size. I think Jim-UT did a pretty good study on these a few years ago. Jim sold all his tractor stuff and no longer posts but I suspect he may peek in now and then so may see this and replay...

    Tim Daley(MI)

    jeff walker    Posted 02-13-2018 at 18:59:09 [URL] [DELETE]        [Reply] [Email]  
  • Re: 8N rear wheel
  • Thanks for the info on rear wheel interchange

    Kirk-NJ    Posted 02-11-2018 at 01:24:49 [URL] [DELETE]        [Reply] [Email]  
  • Re: 8N rear wheel
  • I believe they will. I know for a fact that the TO20/TO30 and TE models will interchange but since I have never owned a TO35 I can't say for sure but I can imagine harry would change the bolt pattern. If your switching them don't get the lug nuts mixed up cause they won't interchange.

    Larry TX    Posted 02-11-2018 at 13:33:53 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 8N rear wheel
  • They're all interchangeable Kirk, Fords and Ferguson centers, up at least through the Ferguson 135's and 235's.

    [Back] [Return to Top of Forum]


    Top