N Board Forum - Expanded Thread Page


[Back] [Return to Top of Forum]

Tim Daley(MI)    Posted 05-21-2018 at 13:34:00 [URL] [DELETE]        [Reply] [No Email]  
  • I'm helping newcomer Jim with his 2N and loader. He wants to get rid of the loader on the tractor now and needs help ID'g it and then good instructions on how to remove it.

    Frank (WNY)    Posted 05-22-2018 at 10:34:50 [URL] [DELETE]        [Reply] [Email]  
  • I have an 19-61 on my 50 8N. I haven't taken it off yet, but from what others have told me it goes like this:

    For the first time I would have 2 people do this.
    1. Remove the fenders.
    2. Loosen the pump enough so that the pump drive shaft can be removed from the drive pulley.
    3. Attach a winch to the loop that is welded to the pipe next to the fill plug. A gantry or over head support would help. This will be used pull the back of the loader up off of the rear axle. Put some tension on it.
    4. Remove the 4 mounting bolts from the rear axle.
    5. Remove the bolts that secure the front of the loader to the front axle.
    6. Lift the back of the loader from the rear axle, enough so that it will clear the tractor when it is backed out from under it.
    7. Back the tractor slowly out. Watch to see that the loader does not contact the tractor.
    8. Support the rear loader mounts on blocks when lowering it down.

    Like I said I haven't tried this yet. If he tries this, let me know if there is anything I might have missed.
    When I go to do this I will take pictures or make a video.

    Tim Daley(MI)    Posted 05-22-2018 at 14:52:06 [URL] [DELETE]        [Reply] [No Email]  
  • Thanks Frank -I let Jim know.

    Tony C    Posted 05-22-2018 at 18:28:34 [URL] [DELETE]        [Reply] [No Email]  
  • Mention a torch with a rosebud, or can(s) of PB blaster,chain fall or come along, a long arm engine hoist, trusty tree limb or beam in the shop, a BFH and a couple of 30 gallon grease barrels to stand it on. A couple of wire ties for a for sale sign on the convenient front bash plate?

    It's an easy loader to remove. GO slow and be careful backing out from under it. Same for releasing the arms. They may have been tweeked a little and will spring when the bolts are driven ......errrrr removed.

    An eighteen of Miller Lite or Bud goes along way with the help.

    Tim Daley(MI)    Posted 05-22-2018 at 03:59:12 [URL] [DELETE]        [Reply] [No Email]  
  • Yes, here's the MPC

    Mark Salzsieder    Posted 05-21-2018 at 21:59:37 [URL] [DELETE]        [Reply] [Email]  
  • It appears to be a Dearborn Industrial Loader, Model 19-61. The manual is available in the Manuals section.

    [Back] [Return to Top of Forum]