N Board Forum - Expanded Thread Page

Subject: Id tractor

[Back] [Return to Top of Forum]

Ron    Posted 07-10-2018 at 14:18:16 [URL] [DELETE]        [Reply] [Email]  
  • Id tractor
  • I have what I believe is a 1963 Ford 600 series. The model number and serial numbers are stamped in the frame just below the air filter and behind the starter

    Model number. 203135
    Serial number. 157308. Both stamped

    On right side os engine is raised # D3JL 6015K

    Dash has tac (top center) fuel gage and power light lower left side. Temp gage center and oil gage lower right
    Can anybody tell me year and model this is.

    Thanks


    Kirk-NJ    Posted 07-11-2018 at 18:43:57 [URL] [DELETE]        [Reply] [Email]  
  • Re: Id tractor
  • Your tractor is a 1962 2000 LCG. It was built in Jan 1962. It would have come with a 134 engine. Your engine has been switched out with a 192 industrial engine

    BlasterStumps    Posted 07-10-2018 at 23:07:22 [URL] [DELETE]        [Reply] [Email]  
  • Re: Id tractor
  • Do you have a picture of this tractor you can share a link to? Maybe a picture of the model number and serial number. A 600 should have something like 640 right above the S/n I would think.

    Doug Siperly    Posted 07-10-2018 at 21:12:14 [URL] [DELETE]        [Reply] [Email]  
  • Re: Id tractor
  • D3JL sounds like a casting from 1973

    SelectOSpeed    Posted 07-11-2018 at 07:55:29 [URL] [DELETE]        [Reply] [Email]  
  • Re: Id tractor
  • The J indicates an Industrial engine. SoS

    mhb@ufe    Posted 07-10-2018 at 20:11:04 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Id tractor
  • Your model number has to many digits. 20313 would be a 2000 LCG with a 4 speed transmission, hydraulics and PTO. the serial number is very high as the 1964 started with serial number 38931.

    Mark

    [Back] [Return to Top of Forum]


    Top