N Board Forum - Expanded Thread Page

Subject: 1942 9n

[Back] [Return to Top of Forum]

David    Posted 07-13-2018 at 18:10:31 [URL] [DELETE]        [Reply] [Email]  
  • 1942 9n
  • I think I found out why my 9n has a non standard generator
    It appears to be a Model A generator
    will it hurt to leave as is or should I replace with what is supposed to be there
    Thank you for any advice

    Tim Daley(MI)    Posted 07-14-2018 at 07:12:38 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 1942 9n
  • Here is an early Ford V8 (1932) generator with the cutout attached. Rating: 12 AMPS/6.7 VOLT output. In 1934 the 3rd Brush was increased to 19 AMPS at 7V output. The FORD Model 'B' auto used the carryover Model 'A' 3-Brush generator with round-can cutout, rated at 12 AMP/6.25 Volt output. In May, 1937, the generator was changed to a 2-Brush/2-Wire unit and now used a voltage regulator, obsoleting the cutout. The FORD 9N tractor first used a variation of this genny and VR.


    Tim Daley(MI)

    David    Posted 07-14-2018 at 08:56:42 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 1942 9n
  • that is the exact generator on my tractor

    Bruce (VA)    Posted 07-13-2018 at 18:28:08 [URL] [DELETE]        [Reply] [Email]  
  • Re: 1942 9n
  • The model a generator put out 7.5 volts just like your 9N generator except the model a generator has the cut out on top of it. I'd leave it alone as long as it works

    Tim Daley(MI)    Posted 07-14-2018 at 07:17:09 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 1942 9n
  • Not 100% certain on this Bruce, but didn't the Model A genny pulley use a 1/2" belt and the N's used a 5/8" belt? Most Model A's and early V8 vehicles I see at shows have all been converted to 12 Volts so I can't determine. Also, pulley diameters were different on both Model A and early V8s.

    Tim Daley(MI)

    David    Posted 07-13-2018 at 19:41:03 [URL] [DELETE]        [Reply] [Email]  
  • Re: 1942 9n
  • I was having one heck of a time trying to ID that generator
    and yes it had a cut out on it
    I tried to explain it the best I could but left a few here still guessing
    Just happened on it while searching for more information
    I will try and work with it but am not having the best of luck

    Bruce (VA)    Posted 07-13-2018 at 19:48:34 [URL] [DELETE]        [Reply] [Email]  
  • Re: 1942 9n
  • Synder's is the go-to source for Model A parts.


    [Back] [Return to Top of Forum]