N Board Forum - Expanded Thread Page

Subject: Hydraulic lift lever assembly

[Back] [Return to Top of Forum]

Dave2N    Posted 07-15-2018 at 12:31:21 [URL] [DELETE]        [Reply] [Email]  
  • Hydraulic lift lever assembly
  • Are the cast iron and punched out steel lever assemblies interchangeable? Part # 9N504B

    K.LaRue-VA    Posted 07-16-2018 at 13:12:26 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Hydraulic lift lever assembly
  • The modern replacements appear to be made to replace all of the originals, so any of the original versions should interchange.

    Tim Daley(MI)    Posted 07-15-2018 at 18:20:51 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Hydraulic lift lever assembly
  • Looking in the MPCs- I do not see a 9N-504 part listed. I do see the 2N-512 lever in both the 1946 2n MPC and the 1947 8NMPC. The 9N-515 quadrant listed in the 2N MPC but inteh8N MPC now has an 8N prefix meaning something was changed. I think early 9Ns were aluminum quadrants. HTH

    Tim Daley(MI)

    r geiger    Posted 07-15-2018 at 20:01:29 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Hydraulic lift lever assembly
  • look in FO-4 at fig 206 item 6 page 143

    Tim Daley(MI)    Posted 07-16-2018 at 14:21:37 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Hydraulic lift lever assembly
  • Yes, we're on the same page now. Best if I have a cup of coffee first and put my glasses on... ; > ) So, Fig. 206, p/n 6 is the infamous 'wishbone bracket' linkage used on the 9N and 2N hydraulic pumps. Note it says 1939-1947 (9N, 2N). Below is the 8N assembly with item #16, p/n 8N-504, Lever,(8N). Those parts do not interchange no matter how much welding one does. My original thought was the quadrant and handle which I think could be changed out, maybe.

    Tim Daley(MI)

    Tim Daley(MI    Posted 07-16-2018 at 04:15:33 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Hydraulic lift lever assembly
  • R Not all F-04 Manuals are the same depending on revision date. My copy shows the 9N/2N Lift Cylinder and shift mechanism on Page 143. Page prior has the lift cover and parts view -what I think you mean to reference. Anyway, like I said, the 9N/2N quadrant is different than the 8N -see Part Number 16. Note p/n 9N515-A3. The "A" denotes it was the first style produced and the "3" denotes there were three different suppliers/types.

    Tim Daley(MI)

    r geiger    Posted 07-16-2018 at 09:35:59 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Hydraulic lift lever assembly
  • he is asking about the lever that hooks to the control valve on the pump. part number 9N504B.

    Dave2N    Posted 07-16-2018 at 18:19:33 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Hydraulic lift lever assembly
  • I have a 1943 2N that has war era characteristics, it has a cast lever. My project 1946 has a punched out steel lever. The 43 is my go to Working Tractor. I lost the hydraulics on a road maintainence project, and wanted to swap out hydraulics. The punched out Steel lever looked damaged where it rests the cylinder. Ended up pulling the top cover from the 43, and bringing home for a rebuild.. After dismantling the top cover there is heavy pitting on rock shaft, Do I have to replace it ?

    Tim Daley(MI)    Posted 07-16-2018 at 11:53:08 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Hydraulic lift lever assembly
  • Yes, but, not all N's are interchangeable. The 9N/2N hyd system is different than the 8N. P/n 9N-504-B, hand lift control, fork assembly is not the same part as the 8N-504 hand lever control.

    Tim Daley(MI)

    r geiger    Posted 07-16-2018 at 12:10:54 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Hydraulic lift lever assembly
  • more information than he ever wanted.

    R Geiger    Posted 07-15-2018 at 16:27:15 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Hydraulic lift lever assembly
  • I don't sewe any reason why they would not interchange.

    [Back] [Return to Top of Forum]


    Top