N Board Forum - Expanded Thread Page

Subject: 9N water pump

[Back] [Return to Top of Forum]

cage    Posted 11-08-2018 at 16:23:08 [URL] [DELETE]        [Reply] [No Email]  
  • 9N water pump
  • I need to remove a broken 1/4 in bolt where the fan attaches to the pully on the water pump. Can the pully be removed/installed while still on the tractor or must the pump be removed and the pully pressed off-on? I have never had any luck with easy outs but am open to suggestions.

    K.LaRue-VA    Posted 11-08-2018 at 19:45:20 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 9N water pump
  • Easiest way to fix that is to remove the water pump. Even if you could get the pulley off, I don't think there is any way to press it back on unless you can get to both ends of the shaft. If the water pump is old, I'd just buy a rebuilt one and let a rebuild shop deal with the busted bolt. If I had a field that needed to be cut, I'd bolt the fan on with the 3 good bolts and fix it when I have the replacement pump and gasket.

    [Back] [Return to Top of Forum]


    Top