N Board Forum - Expanded Thread Page

Subject: lug nuts

[Back] [Return to Top of Forum]

Jim    Posted 11-19-2018 at 11:49:50 [URL] [DELETE]        [Reply] [Email]  
  • lug nuts
  • Can someone tell me what the torque specs are for the rear wheels on the Jubilee? I have some books but don't find it. Thanks

    Rusty 2N    Posted 11-19-2018 at 13:22:48 [URL] [DELETE]        [Reply] [No Email]  
  • Re: lug nuts
  • I looked up bolt torque charts and came up with 150 ft lbs..

    John in Mich    Posted 11-19-2018 at 16:36:09 [URL] [DELETE]        [Reply] [No Email]  
  • Re: lug nuts
  • I believe Rusty 2Ns comment. I only qualify it with this: as a 14 year old in 1957, we did not have a torque wrench or even a socket big enough for the lug nuts. We had the plow wrench. I put the nuts on as tight as I could with that wrench when ever we changed the setup to cultivate and back to utility. Never had one come loose and our '51 8n had (and still does) a Sherman Combo transmission. You gotta KNOW this 14 year old used it, a lot!, and still do at 75!

    Jim    Posted 11-19-2018 at 18:39:51 [URL] [DELETE]        [Reply] [Email]  
  • Re: lug nuts
  • Thanks guys.

    Tony C    Posted 11-19-2018 at 20:12:20 [URL] [DELETE]        [Reply] [No Email]  
  • Re: lug nuts
  • Yep,

    Get them tight as you can with an 18" breaker bar and 18" torque amplifier. Two jumps is sufficient. They will be tight enough. A couple of trips through the cow yard to get some manure on them. No cow yard, mud holes work, but will take longer. It will take the blue wrench to loosen them in a couple of years.

    Tony.
    Ex Yooper,Detroiter thirty plus years in rainy (hoping) NorCal.

    Jim    Posted 11-19-2018 at 21:49:58 [URL] [DELETE]        [Reply] [Email]  
  • Re: lug nuts
  • Thanks Tony.

    [Back] [Return to Top of Forum]


    Top