N Board Forum - Expanded Thread Page

Subject: Cut-A-Way pictures revised

[Back] [Return to Top of Forum]

Farmer Dan    Posted 01-18-2019 at 14:53:47 [URL] [DELETE]        [Reply] [Email]  
  • Cut-A-Way pictures revised
  • I added all the pictures and took out most of the duplicates, resized them all and added book marks. First page gives credit to the two gentlemen that made this cutaway.

    http://www.ntractorclub.com/users/dan_howe/Cut-A-Wayrevised.pdf

    Tim Daley(MI)    Posted 01-20-2019 at 04:42:43 [URL] [DELETE]        [Reply] [No Email]  
  • The Original Cut-Away View
  • All of the 9N and 2N MPC's and Service Manuals have this cutaway view on the second or third page of each.


    Tim Daley(MI)

    Farmer Dan    Posted 01-20-2019 at 07:44:08 [URL] [DELETE]        [Reply] [Email]  
  • Re: The Original Cut-Away View
  • But that's no fun. It was done with a pencil and like the ones that sacrifice a tractor and are cut by hand LOL. And besides who puts connecting rods and pistons in the hydraulics but none in the engine? heee heee heee.

    Tyler (MD)    Posted 01-18-2019 at 16:51:02 [URL] [DELETE]        [Reply] [Email]  
  • Re: Cut-A-Way pictures revised
  • Always thought that was cool the way they did that!

    Tyler

    Farmer Dan    Posted 01-18-2019 at 20:26:28 [URL] [DELETE]        [Reply] [Email]  
  • Re: Cut-A-Way pictures revised
  • Don told me they did all that with a 4" angle grinder. Must have taken a long time.

    Ed Gooding (VA)    Posted 01-19-2019 at 10:06:12 [URL] [DELETE]        [Reply] [Email]  
  • Another one done with a Bridgeport mill
  • Tim Daley(MI)    Posted 01-20-2019 at 04:47:11 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Another one done with a Bridgeport mill
  • It looks like that is a Sherman Transmission on the ground underneath the clutch.

    Tim Daley(MI)

    Ed Gooding (VA)    Posted 01-20-2019 at 07:25:31 [URL] [DELETE]        [Reply] [Email]  
  • Re: Another one done with a Bridgeport mill
  • Pretty sure that's a Hupp.

    [Back] [Return to Top of Forum]


    Top