N Board Forum - Expanded Thread Page

Subject: snowplow ?

[Back] [Return to Top of Forum]

Keith Calhoun    Posted 08-09-2019 at 14:55:07 [URL] [DELETE]        [Reply] [Email]  
  • snowplow ?
  • What model of Dearborn snowplow would be correct for a 1964 Ford 2000 tractor.

    Ultradog MN    Posted 08-10-2019 at 04:26:28 [URL] [DELETE]        [Reply] [No Email]  
  • Re: snowplow ?
  • Technically, the correct snow plow for a 600, 801, 2000 Prior would not be a Dearborn. It would be a Ford implement. However, you might find a cable lift Dearborn model that was made for a Jubilee that would fit as a Jube and 2000 are the same size.
    The one for the later tractors would be hydraulic lift.
    Look in the manuals section here for a manual for one. Note that the frame does not extend back to the rear axles but attaches under the transmission.
    Thanks to Ed Gooding for these photos.


    Ultradog MN    Posted 08-10-2019 at 04:50:48 [URL] [DELETE]        [Reply] [No Email]  
  • Re: snowplow ?
  • A little more info:
    The mounting frames changed over the years. There was one for Ns, a rear axle push for NAA/Jubes and Hundreds the hydraulic lift type for the Hundreds and they made a push frame for the 3 cylinder 2000/3000s too.
    However, the blades - both the dozer blade and the true snow plow blade - are all interchangeable through the years and one from the 1940s will fit a 1970s push frame/tractor.

    Kirk-NJ    Posted 08-10-2019 at 04:16:29 [URL] [DELETE]        [Reply] [Email]  
  • Re: snowplow ?
  • 19-80 with either the cable or hydraulic system. Check the manual section in the red tool bar above.

    TheOldHokie    Posted 08-09-2019 at 18:29:45 [URL] [DELETE]        [Reply] [No Email]  
  • Re: snowplow ?
  • Meyer's Super V ;-)

    TOH

    [Back] [Return to Top of Forum]


    Top