N Board Forum - Expanded Thread Page

Subject: 19-3 snow blade?

[Back] [Return to Top of Forum]

Keith Calhoun    Posted 08-17-2019 at 21:40:14 [URL] [DELETE]        [Reply] [Email]  
  • 19-3 snow blade?
  • Just picked up a Dearborn 19-1 frame and 19-3 snow plow/blade. Can someone tell me if the blade was originally intended to have skid shoe mounts? The bottom lip of this one has two holes on each side, and then a well done angle iron mount like I have never seen. Looking for the original equipment as I am restoring this snow plow and the tractor.

    Charles    Posted 08-19-2019 at 16:45:40 [URL] [DELETE]        [Reply] [Email]  
  • Re: 19-3 snow blade?
  • My mail box open. could send picture plowing, but not photobucket

    Charles    Posted 08-19-2019 at 16:32:57 [URL] [DELETE]        [Reply] [Email]  
  • Re: 19-3 snow blade?
  • I have fabricated and used the skids on my J-1. bulldozer blade, which I also use as a snowplow blade. I have discarde them as the tilt snowolow makes them useless and dig in unfrozen gravel The skids don't work too weell on budozing. I have it mounted on a 2N.
    Instead I leave the 13 hole drawbar on the lift arms. I then run a chain from the drawbar to the center 3 point and adjust the chain to blade depth desired. If the driveway doesn't dip too much, I can keep the blade about 1" above the wet gravel and run at 6-8 miles /hour ' in high range and 2nd gear.
    Charles krammin

    Tim Daley(MI)    Posted 08-18-2019 at 04:36:20 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 19-3 snow blade?
  • HiYa Keith-
    We have some info like the Dearborn Universal Master Parts List for blades and stuff in our MANUALS forum. Click on the LINK below to see if this helps you.

    Tim Daley(MI)

    Kirk-NJ    Posted 08-18-2019 at 02:29:43 [URL] [DELETE]        [Reply] [Email]  
  • Re: 19-3 snow blade?
  • Yes has skid shoe. You can see them on my video.

    Keith Calhoun    Posted 09-19-2019 at 20:19:19 [URL] [DELETE]        [Reply] [Email]  
  • Re: 19-3 snow blade?
  • Thanks Kirk!

    [Back] [Return to Top of Forum]