N Board Forum - Expanded Thread Page

Subject: Tim Daley (MI)

[Back] [Return to Top of Forum]

Greg NE    Posted 09-15-2019 at 10:17:05 [URL] [DELETE]        [Reply] [Email]  
  • Tim Daley (MI)
  • Tim, if it would be possible could you get me some measurements off of the lower brackets for the 10-14 plow? I downloaded the pdf off of this site but can't seem to get the measurements for those brackets to open up. I would really appreciate some help with this so I can get the brackets made for my 'new' plow. Thanks in advance. Greg NE

    Tim Daley(MI)    Posted 09-18-2019 at 08:31:03 [URL] [DELETE]        [Reply] [No Email]  
  • 10-14 PLOW
  • HiYa Greg-
    I don't know what to tell you other than the Auto-Cad drawings Chuck Lyons did and posted here are your best option. My plows and brackets are over at the farm in the barn and I won't be going over there anytime soon. Contact Chuck and ask him. Maybe he can give you an alternative if you don't have AC access. Maybe scan then AC drawing then post it as a jpg and copy it from there. I would if I had my old PC dedicated to AC and MasterCam here but I don't. They're over at the farm/barn in storage since my retirement.


    Tim *PloughNman* Daley(MI)

    *9N653I* & *8NI55I3*

    Greg NE    Posted 09-18-2019 at 16:49:53 [URL] [DELETE]        [Reply] [Email]  
  • Re: 10-14 PLOW
  • Tim, thanks for the reply! I was hoping to catch you before you went to the farm based on your reply to David on the post before this one. You stated that you were heading there and I didn't want to hijack his post to ask you there. Greg NE

    jimk    Posted 09-18-2019 at 11:13:26 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 10-14 PLOW
  • direct me to these cad drawings and I can print them to PDF

    Tim Daley(MI)    Posted 09-18-2019 at 14:08:22 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 10-14 PLOW
  • Go to MANUALS forum / PLOWS scroll down about 9 or 10 items to 10-14 trips bars...you AC to open. He shows the drawings for the bars, but not the brackets.


    TPD

    jim k    Posted 09-18-2019 at 16:25:32 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 10-14 PLOW
  • Tim, how do I post this PDF to the manuals section?

    jim k    Posted 09-18-2019 at 15:49:42 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 10-14 PLOW
  • there are no dimensions on the cad drawing, I can add those and will let you know
    when ready. keep a look out for my reply

    Greg NE    Posted 09-18-2019 at 16:54:33 [URL] [DELETE]        [Reply] [Email]  
  • Re: 10-14 PLOW
  • Jim, thank you for looking into this!! I'm just computer literate enough to be dangerous!!! Greg NE

    jim k    Posted 09-19-2019 at 13:24:36 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 10-14 PLOW
  • I can email you the pdf with all the dimensions if you post your email. Also, you can download the cad file that is in the manuals section to a flash drive, you don't
    need CAD to do that, take drive to your fabricator and they should be able to open
    the file and use it to fab the brackets

    Greg NE    Posted 09-19-2019 at 21:40:17 [URL] [DELETE]        [Reply] [Email]  
  • Re: 10-14 PLOW
  • Jim, here's my email and thank you for helping me out!!

    jim k    Posted 09-19-2019 at 22:43:41 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 10-14 PLOW
  • not seeing an email address

    Greg NE    Posted 09-19-2019 at 22:48:28 [URL] [DELETE]        [Reply] [Email]  
  • Re: 10-14 PLOW
  • It's right beside the reply icon. If it is blue you should be able to send an email to me.

    jim k    Posted 09-20-2019 at 09:13:59 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 10-14 PLOW
  • o.k., I have tried three different browsers, and I dont even see a reply icon, or the email address, dont think I have ever see a reply icon, strange.... wonder why that icon is not showing up?

    jimk    Posted 09-20-2019 at 15:02:12 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 10-14 PLOW
  • maybe someone can explain why I am not able to see a REPLY icon, and it isn't just
    this thread, any that I open, there is no reply icon, I have a preview message, post message, reset icons at bottom of page, no reply icon anywhere on the page, whats
    the deal with that??

    Greg NE    Posted 09-21-2019 at 00:51:31 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 10-14 PLOW
  • Jim, my email address is greg.brauner71@gmail.com. I have only seen one view to this site and it has a place to click on to reply to a message. That's the only way I can reply to anyone and right beside that is a place to click on to send an email to the poster if they entered their email address when the wrote their message. I have no idea what screen you are seeing.

    jimk    Posted 09-23-2019 at 08:59:14 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 10-14 PLOW
  • sent drawings to your email address

    Greg NE    Posted 09-24-2019 at 17:16:08 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 10-14 PLOW
  • Jim, thank you very much for the email and the reply! It some how went to my spam folder but I found it and printed it off. Greg NE

    deanostoybox    Posted 09-20-2019 at 17:43:10 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 10-14 PLOW
  • Hi

    There is not one.

    Look at the top of the post where it says "Posted by" whoever "date, etc."

    If the poster put his email address his name will be a mailto link.

    [Back] [Return to Top of Forum]


    Top