N Board Forum - Expanded Thread Page

Subject: 8N voltage regulator

[Back] [Return to Top of Forum]

Doug Thomas    Posted 10-07-2019 at 17:42:51 [URL] [DELETE]        [Reply] [Email]  
  • 8N voltage regulator
  • may be ordering some parts for my 600 series and my 8n, for the 8n i may order a tool box. i know it mounts to the back of the dash but i have a voltage regulator there. where is the correct location for the voltage regulator. thank you.

    Tim Daley(MI)    Posted 10-08-2019 at 15:06:26 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 8N voltage regulator
  • The OEM 8N AUTO-LITE Voltage Regulator was mounted on 3 rubber insulator/feet on the RH dash panel as shown. The new aftermarket units, the blue one in my pictures, is also mounted on the RH dash, but takes a special replacement bracket to do so. JUST8NS has the bracket, sells it with a new VR, but don't know if they just offer the mtg brkt -call Derek.

    STEVE DABROWSKI’S EARLY 8N RESTORATION PROJECT w/TOOLBOX MOUNTED:

    TIM DALEY’S EARLY 8N WORKING TRACTOR w/TOOLBOX IN POSITION:


    Tim Daley(MI)

    Tim Daley(MI)    Posted 10-08-2019 at 05:06:35 [URL] [DELETE]        [Reply] [Email]  
  • Re: 8N voltage regulator
  • HiYa Doug-
    I have what you need: The correct OEM, rebuilt, 8N generator including the tensioning arm and correct 8N wiring diagrams for the OEM 6V/POS GRN setup; the Voltage Regulator; and the Toolbox. The photo of the '49 8N that JMOR shows has the OEM AUTO-LITE Voltage Regulator, no longer serviced (meaning no longer made) but the new style is available. I have two GOOD used units for sale. The toolbox is a Dennis Carpenter repop, used for 3 months then removed and stored. NO RUST! NO DENTS! NO WELDS! Correct Vermillion Powder Coating. Excellent Condition. The Toolbox mounts with two screws -one on the back of dash, shown in the restored early 8N photo, and the other on the RH battery tray. GEN = $250.00 ; VR = $45; TOOLBOX w/2 Mounting Screws = $30.00. Shipping Is Extra by USPS Priority Mail to USA. Email is open.

    OEM 8N-10505-A TRACTOR AUTO-LITE VOLTAGE REGULATOR:

    OEM CORRECT EARLY (FOR FRONT MOUNT) 8N GENERATOR & VOLTAGE REGULTOR:

    Tim Daley(MI)

    JMOR    Posted 10-07-2019 at 18:01:41 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 8N voltage regulator
  • here E

    Doug Thomas    Posted 10-07-2019 at 18:55:59 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 8N voltage regulator
  • and the tool box will fit in over or next to that?

    JMOR    Posted 10-07-2019 at 19:42:12 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 8N voltage regulator
  • yes

    [Back] [Return to Top of Forum]


    Top