N Board Forum - Expanded Thread Page

Subject: Ferrell

[Back] [Return to Top of Forum]

Mike    Posted 07-12-2020 at 07:46:18 [URL] [DELETE]        [Reply] [Email]  
  • Ferrell
  • I have a Golden Jubilee Tractor. My oil pressure gauge is not reading a pressure. I have taken off the tube and blew air through it and it is clear. I also started the tractor with the tube off and only a little oil comes out of the port in the block. Any suggestions for my next step?

    KCM    Posted 07-13-2020 at 13:32:45 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Ferrell
  • When you take off the oil line from the engine and start it, oil should really squirt out, not just a little. I would say the problem is with the oil pump or drive. I know some of the Jubilee/NAA tractors used a oil pump drive shaft that used a hex on both ends while others used a round shaft with a slotted drive. If it has the hex shaft, one end my have rounded off and is not turning the oil pump much. Also could be something wrong with the oil pickup tube in the pan or pressure relief valve. Maybe a plugged oil pickup screen.

    [Back] [Return to Top of Forum]


    Top