N Board Forum - Expanded Thread Page

Subject: Oil Pressure

[Back] [Return to Top of Forum]

Bob Ward    Posted 08-11-2020 at 07:39:41 [URL] [DELETE]        [Reply] [Email]  
  • Oil Pressure
  • I wish to thank all that responded to my previous dilemma on no oil pressure. I took the route of the oil gauge line suggested by "Den N Ms Tractor Guru" it worked like a charm. My biggest problem was siphoning 2qts of oil thru the oil stick hole, a vacuum pump got it going, and only took 5hrs.
    It started up and went to 45 lbs, as it warmed up it slowly settled down to 22-25 lbs and is holding there, at idle when hot. drops to 18 lbs
    Thanks again to all 🤠😊

    [Back] [Return to Top of Forum]


    Top