N Board Forum - Expanded Thread Page

Subject: belt pulley

[Back] [Return to Top of Forum]

RJM528N    Posted 10-06-2020 at 21:24:52 [URL] [DELETE]        [Reply] [Email]  
  • belt pulley
  • I'm looking at a cordwood saw that will fit on my '52 8N. The 8n isn't running right now-I'm hoping to get it overhauled this winter. I do have a pulley for it although I've never used it. Right now I'm looking at two ads on Craig's list: one is an 8n with a saw already mounted on it and the is a Jubilee at a good price. I'd kind of like another tractor to play with. I decided that instead of getting another 8n just to get the saw, maybe I should get the Jubilee and the saw by itself and put the saw on the Jubilee. Then I happened to think maybe my belt pulley won't fit on a Jubilee. So my question is: does the same pulley fit on an 8n and a Jubilee? How about the hundred and 01 series. I'm pretty sure it won't fit on my '73 3000! Thanks.

    duey    Posted 10-07-2020 at 10:20:39 [URL] [DELETE]        [Reply] [No Email]  
  • Re: belt pulley
  • I've spent many an hour at a cordwood saw... One memory is the typical N exhaust pipe arrangement is not your friend... But.... a slip on 'deflector' or Elbow to point the exhaust ELSEWHERE is worthwhile.

    Tim Daley(MI)    Posted 10-08-2020 at 07:58:38 [URL] [DELETE]        [Reply] [No Email]  
  • Re: belt pulley
  • A vertical exhaust would be handy to have. FYI: If anyone uses the saw, it states in the A&O manual to always place your 11-Hole Drawbar or an equivalent piece metal on the tractor steel body somewhere, running board for example, and to place on earth so implement is grounded. Why? Friction causes static, static becomes a fire hazard. Remember, no OSHA back then. We relied on common sense and elbow grease, no longer available at K-mart.

    Tim Daley(MI)

    Jimmyjack    Posted 10-07-2020 at 09:53:48 [URL] [DELETE]        [Reply] [No Email]  
  • Re: belt pulley
  • I have an excellent pulley set up for the saw rig and two 30 blades Ill put on the sale site.

    Tim Daley(MI)    Posted 10-07-2020 at 05:59:21 [URL] [DELETE]        [Reply] [Email]  
  • Re: belt pulley
  • I have a Dearborn 22-44 Cordwood Saw, fully restored, complete including the belt and belt pulley, manual, and ready for use or show. I have it listed in our ADS forum. Also have a 1-1/8" PTO shaft if needed. Email is open for further details.






    Tim Daley(MI)

    Kirk-NJ    Posted 10-09-2020 at 05:13:30 [URL] [DELETE]        [Reply] [Email]  
  • Re: belt pulley
  • Tim Can you post a photo Of the wishbone bracket that attaches to the link bracket on the pulley. One of the saws I have has double brackets which are too wide for the standard link bracket on the pulley. Did they make two different brackets that attach to the pulley?

    Kirk-NJ    Posted 10-07-2020 at 04:40:35 [URL] [DELETE]        [Reply] [Email]  
  • Re: belt pulley
  • The pto was changed in 1957 from 1 1/8 to the now standard 1 3/8. Plenty of owners have change out to the standard shaft. so check the size of your pto shaft. For your later 3000 they did make one with an 1 3/8. They are a bit harder to find then the 1 1/8 pulley.

    John in Mich    Posted 10-06-2020 at 21:36:19 [URL] [DELETE]        [Reply] [No Email]  
  • Re: belt pulley
  • The simple answer is yes. Now, the slightly more difficult answer is: what size pto shaft do you have in the tractor and what size pto pulley spline do you have? I have seen 1 and 1/8 and I have seen 1 and 3/8.

    [Back] [Return to Top of Forum]


    Top