Re: 1940 9N no spark

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by JMOR on June 14, 2017 at 12:48:20 [URL] [DELETE] :

In Reply to: Re: 1940 9N no spark posted by Luke on June 14, 2017 at 12:35:27:

Measure between the bottom pig tail coil spring & the screw on top. It should be between 0.5 Ohms and 1.5 Ohms. Check meter by holding both leads together first. It is not easy to read such low values accurately & repeatedly.


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]