Re: Distributors are happy now

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by Farmer Dan on September 11, 2017 at 15:43:16 [URL] [DELETE] :

In Reply to: Re: Distributors are happy now posted by TheOldHokie on September 11, 2017 at 11:12:45:

Well I'm out of work for another week :-( so time to pull a chair out and take a break. After seeing TOH use a counter sink I thought I would give it a try. Anybody know where my countersinks went? I used a coupler nut to hold a 8-32x3/8 brass screw in the lathe and touched it with a #6 drill bit sharpened at a 118 and it worked almost perfect. I think we are over thinking this. Like Tim says it shouldn't take much to catch that spring and hold it in place.


Got my worst distributor done now and Tim yours is in the ultra sonic cleaner with some spicNspan. I'll do it next.


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]