Re: Oil pump

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by TheOldHokie on January 02, 2018 at 16:51:56 [URL] [DELETE] :

In Reply to: Re: Oil pump posted by poderac on January 02, 2018 at 16:36:21:

Whoops!! Not a typo - a mental lapse. I have a habit of crossing 5/8 and 9/16 when doing decimal equivalences in my head ;-) So:

Face width on the 9/16" gears should be .561/.562
Face width on the 3/4" gears should be .724/.725

Note that the 3/4" gears are actually a bit narrower than .750. I do not know how they came to be called 3/4" gears but that .724/.725 width is straight from the original Ford prints and I am quite sure it's a good number.

TOH


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]