Re: Dolan

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by Tim Daley(MI) on December 19, 2018 at 07:55:19 [URL] [DELETE] :

In Reply to: Re: Dolan posted by Farmer Dan on December 18, 2018 at 17:56:31:

Yes, Dan good catch! The 8N-1132 Stud Extenders were used with the 8N spacer for use with the dual rears. The pie weight sets were not introduced until the 600/800 Models and then only the 29# ones were to be used on the 600 Model. The HD set, the 45# ones, were declared to be too heavy for the lighter duty 600. This info is in the original 600/800 Operator's Manual. In the 53-58 MPC, the pie weights are listed with the stud extender listed as p/n 8N-1332-A which means there was at least one style.


Tim Daley(MI)


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]