Re: Update on the lift repair

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by TheOldHokie on March 21, 2019 at 14:34:45 [URL] [DELETE] :

In Reply to: Re: Update on the lift repair posted by Kimberly on March 21, 2019 at 12:45:59:

The original Ford specification (below) was for a standard round o-ring and flat backup washer. Both are industry standard off the shelf items - SAE -330 o-ring and backup washer.

McMaster will sell you a bag of fifty 90 durometer buna-n -330 o-rings for $12 and a bag of fifty 90 durometer buna-n -330 backup rings for $9. That works out to $.42 per set. Wanna guess what CNH charges for the 2 they put in a bag???

TOH

NAA-533A O-Ring

Diameter: 2.090/2.110
Cross section: .205/.215
Max flash: .003 high, .005 wide

NAA-473A Backup Washer

Outside diameter: 2.485/2.515
Width: .183/.198
Thickness: .084/.104


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]