Re: Jubilee

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by JR in AR on April 04, 2020 at 21:09:11 [URL] [DELETE] :

In Reply to: Re: Jubilee posted by Dead Eye Dave on April 04, 2020 at 04:22:00:

We did get iit to loosen today. We put a 2x4 block under the side of the pan, used the wrench with a 4 cheater and had son stand on the side of the pan. This was after heating and cooling five times. It took all my weight on the cheater. I also showed him the poor mans way to pull the crank shaft pulley. We ran out of time but are now ready to pull the engine. All other bolts/nuts are broken loose.


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]