Implements Forum - Expanded Thread Page

Subject: 53 Jubilee hydraulic

[Back] [Return to Top of Forum]

CHUCK SCHAAP    Posted 12-11-2020 at 10:04:14 [URL] [DELETE]        [Reply] [Email]  
  • 53 Jubilee hydraulic
  • Greetings. I have a 53 Jubilee and lately the hydraulic life has been less than stellar. It takes time to start lifting--usually with higher RPM's. Chatters when lifting. I believe I have a vane hydraulic as it sits on the right side of the block and is somewhat square. My question is, does the pump need to be rebuilt and if so, is there someplace to get this done as I am not the most handy with that sort of thing. I also see that there are replacement piston?? pumps that can be purchased and installed, however not sure if this is the better way to go as my tractor is mostly original.

    I had a problem with my electrical system earlier specifically points burning out and Bruce Haynes?? helped me out with the issue and it is now a non-issue---Thanks Bruce, I appreciate your help.

    Chuck

    TheOldHokie    Posted 05-18-2021 at 11:13:03 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 53 Jubilee hydraulic
  • Have a look here - as good as if not better than the factory vane or piston pumps. No brag - just fact.

    TOH

    NCA600F-GPC

    Chuck    Posted 05-18-2021 at 15:08:27 [URL] [DELETE]        [Reply] [Email]  
  • Re: 53 Jubilee hydraulic
  • Dan, good talking with you. I would like to order the pump for my Ford Jubilee as we discussed.

    NCA600-GP-R $335.00
    HKT-NAA $65.00
    NCA-905C $150.00
    CONN908A $25.00
    SHIPPING $14.00

    CHUCK SCHAAP
    616-566-1181

    THANKS

    Chuck    Posted 05-18-2021 at 11:19:57 [URL] [DELETE]        [Reply] [Email]  
  • Re: 53 Jubilee hydraulic
  • Is there a way to talk to you directly? I am very interested in this as I need to do something but I have some questions. Thanks

    TheOldHokie    Posted 05-18-2021 at 12:16:13 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 53 Jubilee hydraulic
  • Give me a call - 301.655.0631

    Dan

    Tim Daley(MI)    Posted 12-14-2020 at 08:27:49 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 53 Jubilee hydraulic
  • I suggest you ask this on the regular N-BOARD as you may get more exposure and answers. Be sure you tell us where you are located as I'm sure there is someone near you who can help. I don't recommend buying a new pump --- usually junkers, and no need to -rebuild OEM always 1st choice on anything.


    Tim Daley(MI)

    Chuck    Posted 12-14-2020 at 14:22:06 [URL] [DELETE]        [Reply] [Email]  
  • Re: 53 Jubilee hydraulic
  • Thanks Tim. I am in Michigan--West side.

    [Back] [Return to Top of Forum]


    Top