N Board Forum - Expanded Thread Page

Subject: The Universal Frame (for Dozer or Snow Plow)

[Back] [Return to Top of Forum]

Lexie in VT    Posted 12-13-2021 at 17:32:04 [URL] [DELETE]        [Reply] [Email]  
  • The Universal Frame (for Dozer or Snow Plow)
  • I am working on a Dearborn Model Nineteen-2 Angler Dozer. This dozer blade attaches to the "Universal Frame" which is slung under the belly of the 8N and with cables, raises and lowers the front blade with the Ferguson system 3 point hitch.

    The Blade has its own Dearborn name plate and numbers. The Universal Frame also has a space for an ID plate, but it is long gone.

    Question- did the Universal Frame have its own Model Number, and if so what might it have been? I'd like to place a reproduction ID plate there but don't know what should be stamped on it

    Thanks in Advance, Gents-
    Lexie in Vermont

    Kirk-NJ    Posted 12-14-2021 at 06:18:06 [URL] [DELETE]        [Reply] [Email]  
  • Re: The Universal Frame (for Dozer or Snow Plow)
  • I've had a few 19-1 frame and don't recall ever seeing a tag on them. Will check for holes on the one I have now later today

    TheOldHokie    Posted 12-13-2021 at 18:04:01 [URL] [DELETE]        [Reply] [No Email]  
  • Re: The Universal Frame (for Dozer or Snow Plow)
  • Dearborn Universal Frame Model 19-1

    Herer's a link to the Master Parts book for it and the attachments

    Master Parts Book

    TOH

    TheOldHokie    Posted 12-13-2021 at 18:07:56 [URL] [DELETE]        [Reply] [No Email]  
  • Re: The Universal Frame (for Dozer or Snow Plow)
  • Ooops - guess I should have opened teh links - it only has teh pages for the frame.

    TOH

    Lexie in Vermont    Posted 12-13-2021 at 21:57:04 [URL] [DELETE]        [Reply] [Email]  
  • Re: The Universal Frame (for Dozer or Snow Plow)

  • A Big Thanks to The Old Hokie!

    from Lexie in Vermont

    [Back] [Return to Top of Forum]


    Top