N Board Forum - Expanded Thread Page

Subject: Parts Inventory

[Back] [Return to Top of Forum]

Del Huebner    Posted 01-12-2022 at 13:44:01 [URL] [DELETE]        [Reply] [Email]  
  • Parts Inventory
  • Some spare parts I have just looking for something to build around. Finished the 8N and now looking for another "N" or "NAA".

    Steve Dabrowski    Posted 01-14-2022 at 18:50:10 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Parts Inventory
  • Looks like you have a very early off set air cleaner to Carb feed tube up there, those are pretty hard to find as they were on the very early 39 9N tractors. I have one for my s/n 292. These were on the aluminum hood tractors although the parts 9N I had had the later air cleaner that used the later tube, it was around s/n 3000.

    Jack - Iowa    Posted 01-14-2022 at 09:24:56 [URL] [DELETE]        [Reply] [Email]  
  • Re: Parts Inventory
  • Del,

    My 1947 2N, Serial Number 9-278098 is setting tarped about 8 miles out of Mt. Pleasant, looking for a new owner. Popped right off day before yesterday. Had not been run since September, I believe.

    I had to replace one rear rim last summer so has one new hat rim and tube. Did not put fluid back in that wheel.

    6 volt. Generator is an Auto-Lite GGW-4801-D which probably came from a mid '50's Hudson.

    Open for negotiation. I have sold the farm so need to move it.

    Email is open.

    Tim Daley(MI)    Posted 01-13-2022 at 06:22:07 [URL] [DELETE]        [Reply] [Email]  
  • Re: Parts Inventory
  • HiYa Del-
    So are you selling these parts? Looks like a good selection of some 9N and 8N parts you have. The cyclones are cool, the HARCO Air Cleaner you can keep hanging on the wall... ; > ) If you are selling, I'd be looking for the 9N Belt Tensioner and the License Plate bracket if original.

    Tim Daley(MI)

    [Back] [Return to Top of Forum]