Tools Forum - Expanded Thread Page

Subject: Question

[Back] [Return to Top of Forum]

Gene Brock    Posted 06-15-2019 at 15:21:10 [URL] [DELETE]        [Reply] [Email]  
  • Question
  • I have a mechanical "jack lift" for an original 8N. You simply lay it on the ground. Then drive over it at the same time pulling up the lift arms. It will hold the 8N off the ground enough to allow work with both rear wheels off the ground.

    Jack - Iowa    Posted 06-18-2019 at 06:53:13 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Question
  • Gene,

    Take a look at the link below.

    Is this the jack you are talking about?

    Scroll down to pictures 4, 5 & 6.

    Do you have the front end portion?

    Farmer Dan    Posted 06-16-2019 at 06:33:03 [URL] [DELETE]        [Reply] [Email]  
  • Re: Question
  • It should bring all four wheels off the ground. What is your question?

    Gene Brock    Posted 06-16-2019 at 11:08:15 [URL] [DELETE]        [Reply] [Email]  
  • Re: Question
  • I am thinking I will sell it

    Larry TX    Posted 06-17-2019 at 10:31:34 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Question
  • Gene, if it's complete with the chain, those usually can be procured for anywhere between $100 - $150 depending upon condition, i.e., not bent nor rusted up, etc.

    Gene Brock    Posted 06-18-2019 at 06:52:37 [URL] [DELETE]        [Reply] [Email]  
  • reply
  • Larry TX thanks for your response. It has been some time since I have looked at it. I will check out the chains and over all condition of the unit. Appreciate your help. Gene

    Jack - Iowa    Posted 06-18-2019 at 06:46:54 [URL] [DELETE]        [Reply] [Email]  
  • Re: Question
  • Sounds as if he only has the rear section. Only mentions lifting the rear wheels.

    [Back] [Return to Top of Forum]