Tools Forum - Expanded Thread Page

Subject: King

[Back] [Return to Top of Forum]

Tim    Posted 08-20-2020 at 10:57:13 [URL] [DELETE]        [Reply] [Email]  
  • King
  • Early 40 model 9N serial #10,570.Project tractor, smooth block,aluminium dash,govenor,timing cover,lift control,pto,etc. This one has lots of aluminum, no hood or dog ears though. Looking for old style hood w pop in cover and other stuff.
    Hoping some of the guru's can chime in with some info, Thanks.

    jon    Posted 01-28-2021 at 21:25:46 [URL] [DELETE]        [Reply] [Email]  
  • Re: King
  • Old ad but did you ever find a hood Tim?

    Tim Daley(MI)    Posted 01-03-2021 at 19:16:10 [URL] [DELETE]        [Reply] [No Email]  
  • Re: King
  • What the heck is a 'smooth block'??? If that s/n is correct, it'd be a very early 1940 model and would have the 9N-10000-B generator, 7A, 1-Wire/3-Brush/A Circuit and used the roundcan cutout. Cutouts are sold today but good luck trying to find a B-GEN - or an A for that matter. It'd also have the 4-Spoke Steering Wheel, and Aluminum Horizontal Bar Grille - both items sold today as repops and are very good. See Dennis Carpenter Reproductions to get them.

    Tim Daley(MI)

    Tim King    Posted 01-03-2021 at 19:22:27 [URL] [DELETE]        [Reply] [Email]  
  • Re: King
  • Surely you know what a smooth block is Tim.

    Tim Daley(MI)    Posted 03-24-2021 at 15:03:04 [URL] [DELETE]        [Reply] [No Email]  
  • Re: King
  • OK, Do you mean the smooth-hub rear axles or the lack of freeze plugs on block?


    Tim

    Tim    Posted 08-25-2020 at 08:53:49 [URL] [DELETE]        [Reply] [No Email]  
  • Re: King
  • Thanks Mr. Jack,
    Was mainly looking for restore type input,opinions. Some of the stuff will be like finding hens teeth, such as the original beer can generator, the original aluminum grille "I have a aftermarket aluminum grille".

    Trying to go original used wherever possible, really like the aluminum stuff,it's polishing up nice. Full dash,timing cover,govenor,pro cover plates, trans cover,quadrant etc.

    Right now, the chassis is soaking in a PB BLASTER bath, engine is stuck,plugs look great"no rush or burn up" oil is incredibly clean, looks like we have a decent machine to work with.

    Engine is a smooth block and is cracked but I plan on grinding the old weld n dressing it up a bit without trying to hide it.
    The numbers show it to be a VERY EARLY 40 model.

    I own 7 more tractors,lol, 39,40,42=9N / 43,46=2N/


    50,51,52 Harry Ferguson TO20.
    Kinda got the fever,wife still thinks I'm nuts..

    Jack - Iowa    Posted 08-25-2020 at 06:54:38 [URL] [DELETE]        [Reply] [No Email]  
  • Re: King
  • You need to post this under Ads
    Seems not many check the Tools section.

    [Back] [Return to Top of Forum]


    Top