Re: MS Carburetor

In Reply to: Re: MS Carburetor posted by Tim Daley(MI) on February 07, 2022 at 18:33:08:

One issue I have is with new replacement floats. They seem to be slightly fatter than the originals and when I installed them in my 9N TSX33 they dragged a bit in the inner bowl. This interfered often with closing the needle valve and flooding the unit. I discovered this as there was a small shinny spot on the inner float surface. I fixed it finally by squeezing the float lightly with a pair of channel lock pliers.

Follow Ups:

• Re: MS Carburetor - Tim Daley(MI) 07:00:35 02/11/22 (1)
  • Re: MS Carburetor - Steve Dabrowski 19:02:15 02/11/22 (0)

Name   : 
E-Mail : 
Subject: 

Message:

To add a single image to your post,  click here.
To add multiple images to your post, click here.

Optional Link URL : ←http://www.yourwebsite.com
Link Title        : ←Website Title
Optional Image URL: ←http://www.myimages.com/mypic.jpg

Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!