Re: Thank you

In Reply to: Thank you posted by Ed Gooding (VA) on March 25, 2017 at 09:01:55:

The axle brackets require one to bend 1/2" Grade 50 plate to 90* - NO WELDING those parts, and it does NOT specify 1/2" angle iron. Parts #1, #2, #3, and #4. Also Part #12 requires 3/8" Grade 50 plate to be bent; again NOT angle iron or welded pieces. I had considered building this; but, I have no means to bend that plate properly. Heating to bend removes the characteristics of the metal. I have priced out the iron and fabrication costs, and it is less expensive to buy one specifically manufactured for the 8N. With the ROPS, you must install the seat belt. The ROPS and seat belt combination is designed to keep one within the protected area. No seat belt, and you may very well be crushed or injured by the ROPS on top of you. zuhnc

Follow Ups:

Name   : 
E-Mail : 
Subject: 

Message:

To add a single image to your post,  click here.
To add multiple images to your post, click here.

Optional Link URL : ←http://www.yourwebsite.com
Link Title        : ←Website Title
Optional Image URL: ←http://www.myimages.com/mypic.jpg

Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!