Implements Forum - Expanded Thread Page

Subject: Ferguson Model D-EO-20 Side Delivery Rake

[Back] [Return to Top of Forum]

Jack - Iowa    Posted 04-19-2018 at 14:09:16 [URL] [DELETE]        [Reply] [Email]  
  • Ferguson Model D-EO-20 Side Delivery Rake
  • The four bolts holding the Drive Sheave to the Drive Shaft have sheared on my rake. To remove the sheared bolts I must remove the Drive Shaft. The Universal joint housing is pinned to the Drive Shaft using a Groove Pin per the parts list.

    I carefully measured the both heads to assure I drove on the larger end. Drove it about .025 and the picture shows what I see on the other end.

    It appears, once the Groove Pin had been inserted, they peaned the other end over. It also appears to me as if I am driving in the wrong direction.

    Had anyone had any experience with this rake and can give me some advise. Certainly would be appreciated!

    Thanks,

    Jack

    Jack - Iowa    Posted 04-21-2018 at 08:28:52 [URL] [DELETE]        [Reply] [Email]  
  • Re: Ferguson Model D-EO-20 Side Delivery Rake
  • Found out my picture did not post! Try this link.

    Jack

    Jack - Iowa    Posted 04-19-2018 at 15:35:57 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Ferguson Model D-EO-20 Side Delivery Rake
  • Picture was posted from Google Photos

    [Back] [Return to Top of Forum]


    Top