Topics Related to Implements We Use On Our Tractors
	Post a Message | FAQ| Archives | Posting Policy | Contact NTC
	*Don't forget to refresh/reload the page after posting a message. (Instructions)

---

• ferguson ao 2-14 plow [+] - Lawton 13:30:54 05/16/08 (2)
  • Re: ferguson ao 2-14 plow - Ed Gooding (VA) 14:42:49 05/16/08 (0)
  • Re: ferguson ao 2-14 plow - Lawton 13:53:18 05/16/08 (0)

• 19-61 Dearborn Loader control valve [+] - cass 07:33:28 05/16/08 (0)

• Plow Points [+] - Fred 07:35:46 05/14/08 (1)
  • Re: Plow Points - Ed Gooding (VA) 09:10:49 05/14/08 (0)

• ford pulley [+] - Jimmyjack 21:18:27 05/13/08 (1)
  • Re: ford pulley - Ed Gooding (VA) 09:11:35 05/14/08 (0)

• Mounting a Sherman 54 C100 Digger/Backhoe to a 9/2/8N [+] - Dan Oehmke 22:24:01 05/12/08 (4)
  • Re: Mounting a Sherman 54 C100 Digger/Backhoe to a 9/2/8N - Ed Gooding (VA) 07:39:18 05/13/08 (3)
    • Re: Mounting a Sherman 54 C100 Digger/Backhoe to a 9/2/8N - Dan Oehmke 08:23:10 05/13/08 (2)
      • Re: Mounting a Sherman 54 C100 Digger/Backhoe to a 9/2/8N - Ed Gooding (VA) 08:31:12 05/13/08 (1)
        • Re: Mounting a Sherman 54 C100 Digger/Backhoe to a 9/2/8N - Dan Oehmke 14:58:44 05/13/08 (0)

• bush hog 3pt config [+] - Garrett Fl 20:32:25 05/12/08 (5)
  • Re: bush hog 3pt config - Ed Gooding (VA) 07:44:21 05/13/08 (0)
  • Re: bush hog 3pt config - Paladin (Bob In PA) 22:06:09 05/12/08 (0)
  • Re: bush hog 3pt config - 8n Sam 21:05:52 05/12/08 (2)
    • Re: bush hog 3pt config - Garrett Fl 21:11:38 05/12/08 (1)
      • Re: bush hog 3pt config - 8n Sam 21:27:39 05/12/08 (0)

• plans for a logging arch [+] - JR/ pa 23:34:47 05/11/08 (2)
  • Re: plans for a logging arch - Mike Wilson, Catlett VA 23:20:41 05/13/08 (0)
  • Re: plans for a logging arch - Ed Gooding (VA) 06:13:29 05/12/08 (0)

• pto shaft/bush hog [+] - Garrett Fl 14:29:50 05/10/08 (1)
  • Re: pto shaft/bush hog - RichardNY9N 09:17:57 05/11/08 (0)

• Dearborn-Wood Bros combine - Tom Yaeger [+] - Rick WY 00:22:55 05/10/08 (0)

• Dearborn Front loader [+] - Jeremy 16:14:24 05/06/08 (5)
  • Re: Dearborn Front loader - Jeremy 09:28:45 05/07/08 (1)
    • Re: Dearborn Front loader - Jeremy 09:30:52 05/07/08 (0)
  • Re: Dearborn Front loader - Ed Gooding (VA) 06:05:09 05/07/08 (0)
  • Re: Dearborn Front loader - 8n Sam 21:33:59 05/06/08 (0)
  • Re: Dearborn Front loader - Jeremy 17:05:47 05/06/08 (0)

• Ford Tiller [+] - Karl 15:45:08 05/05/08 (0)

• How do I replace these discs? [+] - BBurton 10:00:17 05/05/08 (1)
  • Re: How do I replace these discs? - mkdouglas 13:43:34 05/06/08 (0)

• Anyone heard of a Youngs Disc? [+] - BBurton 09:49:03 05/05/08 (1)
  • Re: Anyone heard of a Youngs Disc? (url) - Ultradog MN 08:42:09 05/06/08 (0)

• Ferguson 2-16 plow [+] (url) - lonestarjeff 18:13:03 05/04/08 (3)
  • Re: Ferguson 2-16 plow - Steve(WI) 20:58:23 05/06/08 (1)
    • Re: Ferguson 2-16 plow - lonestarjeff 00:23:55 05/09/08 (0)
  • Re: Ferguson 2-16 plow (pic) - Calvin Poulsen 00:00:05 05/05/08 (0)

• HOMEMADE SAND DREDGE [+] - Ron 10:02:44 04/30/08 (3)
  • Re: HOMEMADE SAND DREDGE (url) (pic) - Bob In Paradise 23:43:24 05/03/08 (0)
  • Re: HOMEMADE SAND DREDGE (url) - Randy B 14:38:06 04/30/08 (1)
    • Re: HOMEMADE SAND DREDGE - Ron 22:27:46 04/30/08 (0)

• front seal for a RC 10 howse [+] - Will 15:38:51 04/28/08 (1)
  • Re: front seal for a RC 10 howse - Ed Gooding (VA) 05:27:57 04/30/08 (0)

• CYLINDER REPAIR [+] - Ron 23:36:13 04/27/08 (1)
  • Re: CYLINDER REPAIR - Kevin H - Belleville IL 19:49:16 04/28/08 (0)

• Ford 917 Flail Mower Knives [+] - John O (MI) 18:48:20 04/27/08 (2)
  • Re: Ford 917 Flail Mower Knives (pic) - 8Nwarrior(MI) 19:37:24 04/29/08 (1)
    • Re: Ford 917 Flail Mower Knives - John O (MI) 19:13:21 05/01/08 (0)

• Fasco loader cylinders [+] - John F 11:03:44 04/26/08 (2)
  • Re: Fasco loader cylinders - Calvin Poulsen [Ia] 09:23:32 04/27/08 (0)
  • Re: Fasco loader cylinders - lonestarjeff 00:49:33 04/27/08 (0)

• Freeman Loader Model 80 [+] - Jodie L Bland 19:25:50 04/24/08 (1)
  • Re: Freeman Loader Model 80 (url) - Joe T (CO) 09:40:26 04/26/08 (0)

• How do I keep my mouldboards rust-free [+] - BBurton 15:42:23 04/23/08 (6)
  • Re: How do I keep my mouldboards rust-free - Darwin D 15:25:02 04/26/08 (0)
  • Re: How do I keep my mouldboards rust-free - AM-Seb 13:43:16 04/25/08 (0)
  • Re: How do I keep my mouldboards rust-free - Ken Crisman 23:08:19 04/24/08 (0)
  • Re: How do I keep my mouldboards rust-free (pic) - Mike Wilson, Catlett VA 22:27:45 04/23/08 (0)
  • Re: How do I keep my mouldboards rust-free - Ed Gooding (VA) 17:20:11 04/23/08 (0)
  • Re: How do I keep my mouldboards rust-free - Tim Daley(MI) 16:52:30 04/23/08 (0)

• 3 pt Ford spring tooth drag [+] - Keith (Southwest MI) 15:26:26 04/22/08 (3)
  • Re: 3 pt Ford spring tooth drag - Calvin Poulsen [Ia] 16:02:46 04/22/08 (2)
    • Re: 3 pt Ford spring tooth drag - Tim in Co 19:51:54 04/22/08 (1)
      • Re: 3 pt Ford spring tooth drag - Calvin Poulsen 21:31:15 04/22/08 (0)

• Do I need an over-running clutch with a 4 ft mower? [+] - BBurton 10:11:10 04/22/08 (3)
  • Re: Do I need an over-running clutch with a 4 ft mower? - Farmer Dan 21:36:46 04/22/08 (0)
  • Re: Do I need an over-running clutch with a 4 ft mower? - LeeMo 11:55:03 04/22/08 (0)
  • Re: Do I need an over-running clutch with a 4 ft mower? - Gary__Sarge 11:49:30 04/22/08 (0)

• ford19-202 loader [+] - ken kapitan 18:50:44 04/21/08 (8)
  • Re: ford19-202 loader - Ed Gooding (VA) 06:42:28 04/26/08 (0)
  • Re: ford19-202 loader - Ed Gooding (VA) 06:41:37 04/22/08 (6)
    • Re: ford19-202 loader - ken kapitan 15:24:40 04/23/08 (1)
      • Re: ford19-202 loader - Ed Gooding (VA) 17:23:00 04/23/08 (0)
    • Re: ford19-202 loader - ken kapitan 09:14:21 04/22/08 (3)
      • Re: ford19-202 loader - awhtx 09:32:32 04/22/08 (2)
        • It's a Ford 703 loader - awhtx 09:08:14 04/25/08 (1)
          • Re: It's a Ford 703 loader - ken kapitan 22:00:52 04/25/08 (0)

• OT-Long finish mowers [+] - lonestarjeff 15:07:03 04/21/08 (2)
  • Re: OT-Long finish mowers - Paladin (Bob In PA) 18:12:00 04/21/08 (1)
    • Re: OT-Long finish mowers - lonestarjeff 18:27:14 04/21/08 (0)

• 8N Post Hole Digger [+] - Rick Gowdy 10:24:09 04/21/08 (7)
  • Re: 8N Post Hole Digger - Ken Crisman 23:16:02 04/24/08 (0)
  • Re: 8N Post Hole Digger (url) - Don Doan 13:04:29 04/21/08 (3)
    • Re: 8N Post Hole Digger - Jon Rhee (RI) 13:30:16 04/21/08 (2)
      • Re: 8N Post Hole Digger - Don Doan 13:49:10 04/21/08 (1)
        • Re: 8N Post Hole Digger - Jon Rhee (RI) 13:57:08 04/21/08 (0)
  • Re: 8N Post Hole Digger - Gary__Sarge 12:03:51 04/21/08 (1)
    • Re: 8N Post Hole Digger - Don 09:39:50 04/27/08 (0)

• Differential oil [+] - Bob S 21:42:51 04/20/08 (2)
  • Re: Differential oil - Paladin (Bob In PA) 18:18:15 04/21/08 (0)
  • Re: Differential oil - Gary__Sarge 21:58:15 04/20/08 (0)

• dearborn plow [+] - dan murphy 03:47:05 04/19/08 (1)
  • Re: dearborn plow - Ed Gooding (VA) 07:18:11 04/19/08 (0)

• Disc repair (PIC) [+] (pic) - dukester 15:08:19 04/18/08 (4)
  • Re: Disc repair (PIC) - lonestarjeff 19:08:22 04/18/08 (0)
  • Re: Disc repair (PIC) - Bob N,(MO) 16:54:19 04/18/08 (0)
  • Re: Disc repair (PIC) - Kent 15:36:40 04/18/08 (1)
    • Re: Disc repair (PIC) - Dukester 15:41:32 04/18/08 (0)

• COMMERCIAL TYPE SANDBLASTER [+] - Ron 12:21:48 04/17/08 (3)
  • Re: COMMERCIAL TYPE SANDBLASTER - FlyN2low 21:00:49 04/17/08 (2)
    • Re: COMMERCIAL TYPE SANDBLASTER - 641er 22:54:24 04/17/08 (1)
      • Re: COMMERCIAL TYPE SANDBLASTER - flyN2low 16:55:49 04/18/08 (0)

• Stabilizer bar kit - Heavy duty or standard? [+] - raul 11:48:19 04/16/08 (5)
  • Re: Stabilizer bar kit - Heavy duty or standard? - LeeMo 12:20:29 04/16/08 (4)
    • Re: Stabilizer bar kit - Heavy duty or standard? - raul 12:52:31 04/16/08 (3)
      • Re: Stabilizer bar kit - Heavy duty or standard? - Ed Gooding (VA) 21:53:49 04/18/08 (0)
      • Re: Stabilizer bar kit - Heavy duty or standard? - LeeMo 14:41:44 04/16/08 (1)
        • Re: Stabilizer bar kit - Heavy duty or standard? - raul 23:37:34 04/20/08 (0)

• single bottom drawbar plow [+] - Dave 11:33:23 04/16/08 (2)
  • Re: single bottom drawbar plow - 8N'r--WI 13:35:07 04/16/08 (0)
  • Re: single bottom drawbar plow - LeeMo 12:16:34 04/16/08 (0)

• Dearborn 19-61 Loader on Ford 8N [+] - Ron Blickenstaff 20:02:20 04/13/08 (1)
  • Re: Dearborn 19-61 Loader on Ford 8N - Ed Gooding (VA) 08:35:23 04/15/08 (0)

• BACKHOE ATTACHMENT - 3PT OR FRAME MNT? [+] - Ron 16:46:22 04/13/08 (3)
  • Re: BACKHOE ATTACHMENT - 3PT OR FRAME MNT? - Ed Gooding (VA) 08:37:30 04/15/08 (2)
    • Re: BACKHOE ATTACHMENT - 3PT OR FRAME MNT? - Ron 11:15:26 04/15/08 (1)
      • Re: BACKHOE ATTACHMENT - 3PT OR FRAME MNT? - Ed Gooding (VA) 17:47:03 04/15/08 (0)

• 5 Star Post Hole Digger Parts For Sale [+] - Farmer Dan 13:54:09 04/13/08 (0)

• Anyone recognize this plow?? [+] - mkdouglas 11:06:37 04/13/08 (1)
  • Re: Anyone recognize this plow?? - mkdouglas 13:52:01 04/17/08 (0)

• Hey Ed G. [+] (url) - Ultradog MN 07:56:01 04/10/08 (1)
  • Re: Hey Ed G. - Ed Gooding (VA) 08:16:37 04/10/08 (0)

• Ford Corn Picker [+] - Bob Gusewelle 14:31:04 04/09/08 (2)
  • Re: Ford Corn Picker - Keith (Southwest MI) 15:50:20 04/10/08 (0)
  • Re: Ford Corn Picker - Ed Gooding (VA) 07:12:04 04/10/08 (0)

• MOWER DECK PART FABRICATION [+] - Ron 22:46:01 04/08/08 (0)

• TURF TIRES [+] - Ron 22:38:53 04/08/08 (4)
  • Re: TURF TIRES - Jon Rhee (RI) 12:12:39 04/10/08 (0)
  • Re: TURF TIRES - Beargap 05:30:46 04/09/08 (0)
  • Re: TURF TIRES - Kevin H - Belleville IL 22:52:36 04/08/08 (1)
    • Re: TURF TIRES - BBB 09:15:41 04/09/08 (0)

• what brand is this mower? [+] (pic) - lonestarjeff 11:44:57 04/08/08 (3)
  • another pic (pic) - lonestarjeff 11:47:16 04/08/08 (2)
    • Re: another pic - Kevin H - Belleville IL 19:29:46 04/08/08 (1)
      • Re: another pic - lonestarjeff 20:15:15 04/08/08 (0)

• FRONT mounted finish mower [+] - Ron 13:57:46 04/07/08 (3)
  • Re: FRONT mounted finish mower - Kevin H - Belleville IL 19:35:58 04/08/08 (0)
  • Re: FRONT mounted finish mower - ButtonRock 00:47:40 04/08/08 (0)
  • Re: FRONT mounted finish mower - Farmer Dan 21:00:49 04/07/08 (0)

• Dearborn Boom Pole (???) [+] - Paladin (Bob In PA) 13:43:47 04/07/08 (7)
  • Re: Dearborn Boom Pole (???) - Ed Gooding (VA) 18:51:29 04/07/08 (1)
    • Re: Dearborn Boom Pole (???) - Jim Churcxhill 00:43:11 04/13/08 (0)
  • Re: Dearborn Boom Pole (???) (pic) - lonestarjeff 18:46:38 04/07/08 (3)
    • Re: Dearborn Boom Pole (???) - LeeMo 10:05:59 04/08/08 (2)
      • Re: Dearborn Boom Pole (???) - lonestarjeff 11:17:37 04/08/08 (1)
        • Re: Dearborn Boom Pole (???) - Ed Gooding (VA) 08:20:04 04/09/08 (0)
  • Re: Dearborn Boom Pole (???) - LeeMo 14:15:28 04/07/08 (0)

• TRAIL MOWER [+] - Ron 22:25:49 04/06/08 (10)
  • Re: TRAIL MOWER - Tom W. 20:11:52 04/11/08 (0)
  • Re: TRAIL MOWER - Kevin H - Belleville IL 19:35:40 04/08/08 (0)
  • Re: TRAIL MOWER - ben (tn) 10:29:26 04/08/08 (0)
  • Re: TRAIL MOWER - Jon Rhee (RI) 12:47:03 04/07/08 (0)
  • Re: TRAIL MOWER (url) - Chris Or. 23:28:21 04/06/08 (0)
  • Re: TRAIL MOWER - Chris Or 22:40:07 04/06/08 (2)
    • Re: TRAIL MOWER - Ron 23:11:45 04/06/08 (1)
      • Re: TRAIL MOWER - Beargap 07:45:27 04/07/08 (0)
  • Re: TRAIL MOWER - Farmer Dan 22:31:09 04/06/08 (1)
    • Re: TRAIL MOWER - Wild,Tim 13:40:55 04/08/08 (0)

• Funk plow [+] - Jacob Hudson 14:09:19 04/04/08 (3)
  • Re: Funk plow - Farmer Dan 20:51:29 04/04/08 (2)
    • Re: Funk plow - Jacob Hudson 22:09:24 04/05/08 (0)
    • Re: Funk plow - Paladin (Bob In PA) 20:22:59 04/05/08 (0)

• 5 Star 3-Point Post Hole Digger, I need help [+] - Farmer Dan 19:44:12 04/03/08 (7)
  • Re: 5 Star 3-Point Post Hole Digger, I need help - Ed Gooding (VA) 07:48:45 04/05/08 (0)
  • Re: 5 Star 3-Point Post Hole Digger, I need help - Randy B 22:49:37 04/03/08 (1)
    • Re: 5 Star 3-Point Post Hole Digger, I need help - Farmer Dan 20:54:46 04/04/08 (0)
  • Re: 5 Star 3-Point Post Hole Digger, I need help - lonestarjeff 20:13:54 04/03/08 (3)
    • Re: 5 Star 3-Point Post Hole Digger, I need help - Farmer Dan 21:19:55 04/03/08 (2)
      • Re: 5 Star 3-Point Post Hole Digger, I need help - lonestarjeff 21:50:17 04/03/08 (1)
        • Re: 5 Star 3-Point Post Hole Digger, I need help - Farmer Dan 22:13:18 04/03/08 (0)

• Dearborn Plow Coulters [+] - Jon Rhee (RI) 12:42:45 04/03/08 (6)
  • Re: Dearborn Plow Coulters - Scott PA 20:25:28 04/03/08 (3)
    • Re: Dearborn Plow Coulters - Jon Rhee (RI) 08:55:14 04/04/08 (2)
      • Re: Dearborn Plow Coulters - Ed Gooding (VA) 08:00:56 04/05/08 (1)
        • Re: Dearborn Plow Coulters - Jon Rhee (RI) 10:13:30 04/05/08 (0)
  • Re: Dearborn Plow Coulters (pic) - Bob N.(MO) 15:15:55 04/03/08 (1)
    • Re: Dearborn Plow Coulters (pic) - Bob N.(MO) 10:55:05 04/04/08 (0)

• Help me identify Ferguson plow [+] - BBurton 19:50:00 04/02/08 (3)
  • Re: Help me identify Ferguson plow - lonestarjeff 20:40:31 04/02/08 (2)
    • Re: Help me identify Ferguson plow - BBurton 20:56:03 04/02/08 (1)
      • Re: Help me identify Ferguson plow (url) - lonestarjeff 00:11:35 04/03/08 (0)

• WANTED: Superior Model 100 loader info [+] - Richard Oakley 17:32:57 04/02/08 (0)

• Farmland Mower [+] (url) - BBurton 10:58:34 04/02/08 (0)

• WANTED: Loader posts for Dearborn 19-7 [+] - Darrin Karsner 09:55:09 04/02/08 (0)

• Ferguson rake [+] - paulmac 13:19:22 04/01/08 (0)

• Ferguson rake [+] - paulmac 13:13:52 04/01/08 (0)

• American Farmland Mower [+] (url) - BBurton 22:22:09 03/31/08 (0)

• Replacement Dearborn Tags? [+] - Ultradog MN 18:28:39 03/31/08 (4)
  • Re: Replacement Dearborn Tags? - Ultradog MN 07:16:12 04/02/08 (1)
    • Re: Replacement Dearborn Tags? - Bob N.(MO) 19:17:50 04/02/08 (0)
  • Re: Replacement Dearborn Tags? (url) - Rick WY 21:09:38 03/31/08 (0)
  • Re: Replacement Dearborn Tags? - kirk 21:05:14 03/31/08 (0)

• Grass cutting with the 8N [+] - Ron 11:32:07 03/28/08 (11)
  • Re: Grass cutting with the 8N - Kevin H - Belleville IL 19:38:17 04/08/08 (0)
  • Re: Grass cutting with the 8N - Ron 22:41:23 03/31/08 (1)
    • Re: Grass cutting with the 8N - BBB 12:13:02 04/01/08 (0)
  • Re: Grass cutting with the 8N - BBB 10:20:48 03/31/08 (0)
  • Re: Grass cutting with the 8N - Bear Gap 07:40:05 03/29/08 (0)
  • Re: Grass cutting with the 8N - S.Gross(in pa) 06:49:34 03/29/08 (0)
  • Re: Grass cutting with the 8N - Ron 00:24:13 03/29/08 (0)
  • Re: Grass cutting with the 8N - carl ny 22:13:15 03/28/08 (0)
  • Re: Grass cutting with the 8N - lonestarjeff 16:16:35 03/28/08 (0)
  • Re: Grass cutting with the 8N - LeeMo 13:45:51 03/28/08 (0)
  • Re: Grass cutting with the 8N - Frank NY 12:42:54 03/28/08 (0)

• plow [+] - Bob N.(MO) 10:41:09 03/28/08 (2)
  • Re: plow - Ed Gooding (VA) 10:56:08 03/28/08 (1)
    • Re: plow - Bob N.(MO) 11:18:58 03/28/08 (0)

• wanted dearborn planter plates [+] - Lawton 11:38:53 03/26/08 (0)

• Looking at Chipper Shredder [+] - Frank TX 2N 08:31:20 03/26/08 (0)

• JD 350 siclebar mower [+] - Don 18:44:08 03/25/08 (0)

• 8N rear grader blade problems [+] - Ron 14:27:36 03/25/08 (5)
  • Re: 8N rear grader blade problems - jesse yoder mi. 20:27:39 03/26/08 (1)
    • Re: 8N rear grader blade problems (pic) - Keith (Southwest MI) 06:22:37 03/27/08 (0)
  • Re: 8N rear grader blade problems - LeeMo 10:34:52 03/26/08 (0)
  • Re: 8N rear grader blade problems - Chy Finger lakes N.Y. 19:26:55 03/25/08 (0)
  • Re: 8N rear grader blade problems - Mike Wilson, Catlett VA 19:07:41 03/25/08 (0)

• plow on craigslist in NE Wisconsin [+] (url) - mike 00:29:03 03/23/08 (1)
  • Re: plow on craigslist in NE Wisconsin - lonestarjeff 23:35:50 03/23/08 (0)

• Bombardier Half Tracks - Parts & Advice [+] - Rick WY 23:25:22 03/22/08 (5)
  • Re: Bombardier Half Tracks - Parts & Advice - carl ny 11:48:25 03/25/08 (0)
  • Re: Bombardier Half Tracks - Parts & Advice - ButtonRock 05:34:38 03/25/08 (0)
  • Re: Bombardier Half Tracks - Parts & Advice (url) - Chris 00:02:20 03/23/08 (2)
    • Re: Bombardier Half Tracks - Parts & Advice - Rick WY 13:18:54 03/23/08 (1)
      • Re: Bombardier Half Tracks - Parts & Advice - ButtonRock 16:17:37 03/31/08 (0)

• Dearborn 22-44 Cordwood saw [+] - James Gregory 10:55:21 03/22/08 (9)
  • Re: Dearborn 22-44 Cordwood saw - Ed Gooding (VA) 08:00:14 03/23/08 (3)
    • Re: Dearborn 22-44 Cordwood saw - Paladin (Bob In PA) 22:33:08 03/26/08 (2)
      • Re: Dearborn 22-44 Cordwood saw - Ed Gooding (VA) 07:40:45 03/27/08 (1)
        • Re: Dearborn 22-44 Cordwood saw - Jon Rhee (RI) 11:52:21 03/27/08 (0)
  • Re: Dearborn 22-44 Cordwood saw - lonestarjeff 00:40:55 03/23/08 (4)
    • Re: Dearborn 22-44 Cordwood saw - JOn Rhee (RI) 08:12:20 03/23/08 (3)
      • Re: Dearborn 22-44 Cordwood saw - lonestarjeff 11:58:20 03/23/08 (2)
        • Re: Dearborn 22-44 Cordwood saw - Jon Rhee (RI) 12:11:04 03/24/08 (0)
        • Re: Dearborn 22-44 Cordwood saw - James Gregory 12:21:52 03/23/08 (0)

• Pond / Dirt scoop questions and picture [+] - Dukester 14:04:59 03/19/08 (5)
  • Re: Pond / Dirt scoop questions and picture - Curtis 11:12:28 04/21/08 (0)
  • Re: Pond / Dirt scoop questions and picture - lonestarjeff 21:14:24 03/19/08 (0)
  • Re: Pond / Dirt scoop questions and picture - Ed Gooding (VA) 15:26:32 03/19/08 (2)
    • Re: Pond / Dirt scoop questions and picture - BBB 12:31:04 03/24/08 (0)
    • Re: Pond / Dirt scoop questions and picture - Dukester 15:43:35 03/19/08 (0)

• Planting Season [+] - Andy Snyder 16:18:11 03/17/08 (3)
  • Re: Planting Season - dethomas 10:16:36 03/21/08 (0)
  • Re: Planting Season - dethomas 08:50:30 03/21/08 (0)
  • Re: Planting Season - Mike Wilson, Catlett VA 22:51:32 03/20/08 (0)

• disc [+] - Bob N.(MO) 09:12:17 03/17/08 (10)
  • Re: disc - Ed Gooding (VA) 05:47:54 03/18/08 (6)
    • Re: disc - Bob N.(MO) 08:08:21 03/19/08 (5)
      • Re: disc - Ed Gooding (VA) 08:34:49 03/19/08 (4)
        • Re: disc - Bob N.(MO) 09:02:43 03/20/08 (3)
          • Re: disc - Ed Gooding (VA) 10:43:25 03/20/08 (2)
            • Re: disc - Bob N.(MO) 12:23:07 03/20/08 (1)
              • Re: disc - Bob N.(MO) 19:31:54 03/20/08 (0)
  • Re: disc - Ultradog MN 18:50:31 03/17/08 (1)
    • Re: disc - Bob N.(MO) 19:28:00 03/20/08 (0)
  • Re: disc - Ed Gooding (VA) 09:59:26 03/17/08 (0)

• Howse disc bearing question [+] (pic) - Joe T (CO) 19:24:39 03/15/08 (4)
  • Re: Howse disc bearing question - Ultradog MN 19:10:14 03/17/08 (3)
    • Re: Howse disc bearing question - Joe T (CO) 21:03:47 03/17/08 (2)
      • Re: Howse disc bearing question - Ultradog MN 22:17:42 03/17/08 (1)
        • Re: Howse disc bearing question (url) - steamnjn23 08:15:16 04/15/08 (0)

• Sherman backhoe safety mods [+] - Ron 20:56:14 03/13/08 (13)
  • Re: Sherman backhoe safety mods - S.Gross(in pa) 08:54:19 03/15/08 (9)
    • Re: Sherman backhoe safety mods - Ron 11:22:42 03/15/08 (8)
      • Re: Sherman backhoe safety mods - Chy Finger Lakes N. Y. 15:41:51 03/15/08 (7)
        • Re: Sherman backhoe safety mods - Ron 11:22:33 03/16/08 (5)
          • Re: Sherman backhoe safety mods - Ed Gooding (VA) 08:18:59 03/17/08 (3)
            • Re: Sherman backhoe safety mods - Ron 11:16:29 03/17/08 (2)
              • Re: Sherman backhoe safety mods - Ed Gooding (VA) 11:38:00 03/17/08 (1)
                • Re: Sherman backhoe safety mods - Ron 12:10:16 03/17/08 (0)
          • Re: Sherman backhoe safety mods - Chy Finger Lakes N.Y. 12:21:42 03/16/08 (0)
        • Re: Sherman backhoe safety mods - Ed Gooding (VA) 07:01:21 03/16/08 (0)
  • Re: Sherman backhoe safety mods - lonestarjeff 13:14:04 03/14/08 (0)
  • Re: Sherman backhoe safety mods - Chy Finger Lakes N.Y. 09:07:50 03/14/08 (0)
  • Re: Sherman backhoe safety mods - ButtonRock 01:39:30 03/14/08 (0)

• Dearborn 14-15/16 Sickle Mower Drag Bar Ball Cup [+] - Scott 20:54:45 03/12/08 (2)
  • Re: Dearborn 14-15/16 Sickle Mower Drag Bar Ball Cup - Ed Gooding (VA) 06:25:49 03/14/08 (0)
  • Re: Dearborn 14-15/16 Sickle Mower Drag Bar Ball Cup - Mike Wilson, Catlett VA 22:53:26 03/13/08 (0)

• Dearborn Plow Coulter [+] - Jon Rhee (RI) 12:12:47 03/10/08 (10)
  • Re: Dearborn Plow Coulter - James Gregory 21:55:39 03/10/08 (9)
    • Re: Dearborn Plow Coulter (pic) - Jon Rhee (RI) 12:00:24 03/11/08 (8)
      • Re: Dearborn Plow Coulter (pic) - Jon Rhee (RI) 12:02:06 03/11/08 (7)
        • Re: Dearborn Plow Coulter - Jonas Hastings 00:01:29 03/12/08 (0)
        • Re: Dearborn Plow Coulter - James Gregory 15:29:06 03/11/08 (5)
          • Re: Dearborn Plow Coulter - Jon Rhee (RI) 16:35:08 03/11/08 (4)
            • Re: Dearborn Plow Coulter - James Gregory 21:41:32 03/11/08 (3)
              • Re: Dearborn Plow Coulter - James Gregory 22:03:17 03/11/08 (2)
                • Re: Dearborn Plow Coulter - Jon Rhee (RI) 12:18:16 03/12/08 (1)
                  • Re: Dearborn Plow Coulter - James Gregory 21:53:13 03/12/08 (0)

• Got some Back Hoe questions? [+] - Farmer Dan 18:36:04 03/09/08 (2)
  • Re: Got some Back Hoe questions? - Bruce Dorsi 17:36:52 03/10/08 (0)
  • Re: Got some Back Hoe questions? - Ed Gooding (VA) 08:34:21 03/10/08 (0)

• oliver 21 b plow [+] - gary in nc 18:37:39 03/09/08 (0)

• Hydraulic Scraper [+] - Rick WY 02:52:27 03/09/08 (4)
  • Re: Hydraulic Scraper (url) - KCM 01:32:59 03/13/08 (0)
  • Re: Hydraulic Scraper (pic) - Jonas Hastings 20:58:56 03/09/08 (0)
  • Re: Hydraulic Scraper - lonestarjeff 11:38:33 03/09/08 (1)
    • Re: Hydraulic Scraper - Rick WY 20:41:06 03/09/08 (0)

• Swinging Drawbar mounted on Three-point Frame [+] - Rick WY 02:38:15 03/09/08 (2)
  • Re: Swinging Drawbar mounted on Three-point Frame - lonestarjeff 11:48:36 03/09/08 (1)
    • Re: Swinging Drawbar mounted on Three-point Frame - Rick WY 13:23:34 03/09/08 (0)

• Dearborn 10-10 plows [+] - James Gregory 19:58:28 03/07/08 (5)
  • Re: Dearborn 10-10 plows - Scott PA 21:21:23 03/07/08 (4)
    • Re: Dearborn 10-10 plows - James Gregory 10:48:52 03/08/08 (3)
      • 10-10 plow w/ Scotch Share - James Gregory 15:27:52 03/09/08 (2)
        • Re: 10-10 plow w/ Scotch Share - Ed Gooding (VA) 08:44:14 03/10/08 (1)
          • Re: 10-10 plow w/ Scotch Share - James Gregory 17:06:35 03/10/08 (0)

• Weed Hooks for plows [+] - James Gregory 19:20:29 03/04/08 (12)
  • Re: Weed Hooks for plows (pic) - Jonas Hastings 00:49:48 03/05/08 (0)
  • Re: Weed Hooks for plows - Scott PA 21:08:36 03/04/08 (10)
    • Re: Weed Hooks for plows - James Gregory 11:17:25 03/05/08 (9)
      • Re: Weed Hooks for plows - Jonas Hastings 11:43:08 03/05/08 (8)
        • Re: Weed Hooks for plows - James Gregory 13:21:15 03/05/08 (7)
          • Re: Weed Hooks for plows - Jonas Hastings 13:24:15 03/05/08 (6)
            • Re: Weed Hooks for plows - James Gregory 13:29:59 03/05/08 (5)
              • Re: Weed Hooks for plows - Jonas Hastings 23:38:18 03/05/08 (3)
                • Re: Weed Hooks for plows - James Gregory 12:35:48 03/07/08 (2)
                  • Re: Weed Hooks for plows - Jonas Hastings 13:44:50 03/07/08 (1)
                    • Re: Weed Hooks for plows - James Gregory 18:40:55 03/07/08 (0)
              • Re: Weed Hooks for plows - Jonas Hastings 13:56:42 03/05/08 (0)

• Dearborn 10-183 [+] - Jon Rhee (RI) 17:29:25 03/04/08 (9)
  • Re: Dearborn 10-183 - Ed Gooding (VA) 08:57:01 03/05/08 (8)
    • Re: Dearborn 10-183 - Jon Rhee (RI) 09:57:19 03/05/08 (7)
      • Re: Dearborn 10-183 - Ed Gooding (VA) 10:21:26 03/05/08 (6)
        • Re: Dearborn 10-183 - Jon Rhee (RI) 13:17:09 03/05/08 (4)
          • Re: Dearborn 10-183 - Ed Gooding (VA) 15:17:29 03/05/08 (3)
            • Re: Dearborn 10-183 - Jon Rhee (RI) 17:16:07 03/05/08 (2)
              • Re: Dearborn 10-183 - Ed Gooding (VA) 09:28:52 03/08/08 (1)
                • Re: Dearborn 10-183 - Jon Rhee (RI) 09:17:58 03/10/08 (0)
        • Re: Dearborn 10-183 - Jon Rhee (RI) 10:33:32 03/05/08 (0)

• Source for Woods mower parts? [+] - SAM-n-GA 16:00:20 03/04/08 (2)
  • Re: Source for Woods mower parts? - Ed Gooding (VA) 16:09:03 03/04/08 (1)
    • Re: Source for Woods mower parts? - SAM-n-GA 17:11:46 03/04/08 (0)

• Ferguson plow 12B [+] - David Malcomb 17:28:47 03/03/08 (7)
  • Re: Ferguson plow 12B - Ed Gooding (VA) 07:34:14 03/04/08 (2)
    • Re: Ferguson plow 12B - Don Doan 12:40:44 03/04/08 (1)
      • Re: Ferguson plow 12B - Ed Gooding (VA) 09:04:46 03/05/08 (0)
  • Re: Ferguson plow 12B - lonestarjeff 21:48:24 03/03/08 (0)
  • Re: Ferguson plow 12B (url) - Don Doan 19:30:26 03/03/08 (0)
  • Re: Ferguson plow 12B - Scott PA 18:51:10 03/03/08 (1)
    • Re: Ferguson plow 12B - lonestarjeff 21:41:17 03/03/08 (0)

• Landscape Rake question [+] - Farmer Dan 21:32:19 03/02/08 (3)
  • Re: Landscape Rake question - Sean (TX) 17:19:57 03/04/08 (0)
  • Re: Landscape Rake question - Ed Gooding (VA) 09:12:09 03/03/08 (1)
    • Re: Thanks Ed - Farmer Dan 18:30:56 03/03/08 (0)

• dearborn plow question [+] - kirk 20:04:13 03/02/08 (1)
  • Re: dearborn plow question - Ed Gooding (VA) 06:32:27 03/03/08 (0)

• Ferguson Transport Box [+] - Jim Lawrence 22:44:20 02/29/08 (5)
  • Re: Ferguson Transport Box measurements - Mike Wilson, Catlett VA 19:58:54 03/07/08 (1)
    • Re: Ferguson Transport Box measurements - Jim Lawrence 10:45:43 03/08/08 (0)
  • Re: Ferguson Transport Box (url) - Hank AB AB 01:14:32 03/04/08 (0)
  • Re: Ferguson Transport Box - dethomas 15:57:46 03/03/08 (0)
  • Re: Ferguson Transport Box - Joe T (CO) 23:09:06 02/29/08 (0)

• Drawbar [+] - Robert Smith 18:45:56 02/29/08 (5)
  • Re: Drawbar - Ed Gooding (VA) 07:17:58 03/01/08 (0)
  • Re: Drawbar (pic) - Joe T (CO) 20:44:06 02/29/08 (3)
    • Re: Drawbar - Paladin (Bob In PA) 22:38:08 02/29/08 (2)
      • Re: Drawbar - Tim PloughNman Daley(MI) 10:17:45 03/02/08 (1)
        • Re: Drawbar - Tim Daley Mi 15:18:55 03/02/08 (0)

• Dearborn Snow PLow [+] - Jon Rhee (RI) 13:50:12 02/25/08 (3)
  • Re: Dearborn Snow PLow - Ernie LI 18:14:38 02/25/08 (0)
  • Re: Dearborn Snow PLow - Al-WI 13:59:33 02/25/08 (1)
    • Re: Dearborn Snow PLow - Jon Rhee (RI) 13:11:04 02/26/08 (0)

• wheel spacing for plowing [+] - Al Bacon 11:36:18 02/24/08 (2)
  • Re: wheel spacing for plowing - Ed Gooding (VA) 07:16:04 02/25/08 (0)
  • Re: wheel spacing for plowing - Jim MO. 17:10:24 02/24/08 (0)

• rotory tiller [+] - Don 08:58:04 02/23/08 (8)
  • Re: rotory tiller - Don 03:14:04 02/26/08 (1)
    • Re: rotory tiller - Ed Gooding (VA) 08:39:18 02/26/08 (0)
  • Re: rotory tiller - Harry B ne 13:12:14 02/23/08 (3)
    • Re: rotory tiller - Ed Gooding (VA) 13:29:21 02/23/08 (2)
      • Re: rotory tiller - Harry B Ne 15:09:49 02/23/08 (1)
  • Re: rotory tiller - Ed Gooding (VA) 10:43:48 02/23/08 (0)
  • Re: rotory tiller - Tony Stark 10:31:55 02/23/08 (0)

• Trencher for Ford N series ? [+] - Bob In Paradise 16:52:48 02/21/08 (7)
  • Re: Trencher for Ford N series ? - Bob In Paradise 14:34:06 02/24/08 (1)
    • Re: Trencher for Ford N series ? - Ed Gooding (VA) 07:17:28 02/25/08 (0)
  • Re: Trencher for Ford N series ? - Ed Gooding (VA) 09:11:59 02/22/08 (0)
  • Re: Trencher for Ford N series ? - Keith (Southwest MI) 05:06:42 02/22/08 (2)
    • Re: Trencher for Ford N series ? - Jim Lawrence 10:14:39 02/22/08 (1)
      • Re: Trencher for Ford N series ? - Keith (Southwest MI) 10:35:54 02/22/08 (0)
  • Re: Trencher for Ford N series ? - Stumpy(NH) 19:08:44 02/21/08 (0)

• side dressing [+] - Thomas 17:44:54 02/20/08 (2)
  • Re: side dressing - Len 20:51:09 02/29/08 (0)
  • Re: side dressing - Keith (Southwest MI) 06:13:20 02/21/08 (0)

• dearborn 3pt drag [+] - Lawton 11:52:33 02/20/08 (0)

• Dumb Question [+] - Jim Lawrence 10:41:42 02/20/08 (8)
  • Is this what you saw? (pic) - Bruce Dorsi 12:55:40 02/21/08 (0)
  • Re: Dumb Question - Ed Gooding (VA) 11:06:00 02/21/08 (3)
    • Re: Dumb Question - Jim Lawrence 11:31:52 02/21/08 (2)
      • Re: Dumb Question - Ed Gooding (VA) 05:41:45 02/22/08 (0)
      • Re: Dumb Question - dethomas 15:13:08 02/21/08 (0)
  • Re: Dumb Question (pic) - Tim Daley(MI) 12:06:05 02/20/08 (0)
  • Re: Dumb Question (pic) - Keith (Southwest MI) 11:30:45 02/20/08 (1)
    • Re: Dumb Question - Jim Lawrence 11:54:38 02/20/08 (0)

• Dearborn wagon running gear [+] - BrianS, NE 14:19:47 02/19/08 (4)
  • Re: Dearborn wagon running gear - Mike Wilson, Catlett VA 22:18:46 02/23/08 (0)
  • Re: Dearborn wagon running gear - Jim Lawrence 09:29:04 02/20/08 (1)
    • Re: Dearborn wagon running gear - BrianS, NE 09:44:51 02/20/08 (0)
  • Re: Dearborn wagon running gear - KCM 22:21:16 02/19/08 (0)

• Reversable scoop for 8N [+] - Harold Boles 11:55:03 02/15/08 (1)
  • Re: Reversable scoop for 8N - Joe in MI 22:53:13 03/27/08 (0)

• Dearborn 10-14 Plow [+] - Don Doan 22:05:04 02/14/08 (12)
  • Re: Dearborn 10-14 Plow - Tim Daley(MI) 20:50:38 02/16/08 (1)
    • Re: Dearborn 10-14 Plow - Don Doan 21:50:47 02/16/08 (0)
  • Re: Dearborn 10-14 Plow - Paladin (Bob In PA) 13:25:41 02/15/08 (7)
    • Re: Dearborn 10-14 Plow - Don Doan 13:45:39 02/15/08 (6)
      • Re: Dearborn 10-14 Plow - Bruce Dorsi 20:42:24 02/15/08 (5)
        • Re: Dearborn 10-14 Plow - Tim Daley(MI) 10:25:02 03/02/08 (0)
        • Re: Dearborn 10-14 Plow - Don Doan 12:52:13 02/16/08 (0)
        • Re: Dearborn 10-14 Plow (pic) - Ultradog MN 12:06:00 02/16/08 (1)
          • Re: Dearborn 10-14 Plow - Don Doan 13:02:53 02/16/08 (0)
        • Re: Dearborn 10-14 Plow - Don Doan 21:05:52 02/15/08 (0)
  • Re: Dearborn 10-14 Plow (url) - Ultradog MN 10:36:43 02/15/08 (1)
    • Re: Dearborn 10-14 Plow - Don Doan 12:01:19 02/15/08 (0)

• backblade [+] (pic) - S.Gross(in Pa) 15:00:51 02/14/08 (4)
  • Re: backblade - ButtonRock 01:46:00 02/15/08 (0)
  • Re: backblade - lonestarjeff 21:56:38 02/14/08 (0)
  • Re: backblade - Farmer Dan 21:03:31 02/14/08 (0)
  • Re: backblade - Gary__Sarge 16:40:30 02/14/08 (0)

• Logging implement/winch [+] (url) - lonestarjeff 01:15:30 02/14/08 (0)

• front loader what is it [+] (pic) - Ron 00:39:17 02/14/08 (10)
  • Re: front loader what is it - Dean 17:14:06 02/15/08 (0)
  • Re: front loader what is it - Stumpy(NH) 19:01:17 02/14/08 (1)
    • Re: front loader what is it - Ron 19:12:14 02/14/08 (0)
  • Re: front loader what is it - Ed Gooding (VA) 08:21:18 02/14/08 (6)
    • Re: front loader what is it - Charlie 10:53:40 05/08/08 (0)
    • Re: front loader what is it - Jeff 53 Jube 08:08:50 03/12/08 (0)
    • Re: front loader what is it - Ron 14:24:08 02/14/08 (3)
      • Re: front loader what is it - Ed Gooding (VA) 15:31:56 02/14/08 (2)
        • Re: front loader what is it - Paul Schultz 21:36:51 02/17/08 (1)
          • Re: front loader what is it - Ron 22:26:02 02/17/08 (0)

• ferguson plow [+] - Allen-Mo. 18:44:46 02/13/08 (1)
  • Re: ferguson plow - Jonas Hastings 23:43:56 02/13/08 (0)

• Wanted dearborn planter [+] - Lawton 13:03:51 02/12/08 (0)

• disc [+] (pic) - S.Gross(in pa) 18:27:34 02/10/08 (6)
  • Re: disc - Ed Gooding (VA) 19:47:13 02/10/08 (5)
    • Re: disc - Ed Gooding (VA) 15:35:02 02/14/08 (3)
      • Re: disc - S.Gross(in Pa) 16:16:06 02/14/08 (2)
        • Re: disc - Ed Gooding (VA) 08:13:57 02/15/08 (1)
          • Re: disc - S.Gross(in Pa) 07:40:42 02/16/08 (0)
    • Re: disc - S.Gross(in Pa) 15:16:01 02/14/08 (0)

• ferguson plow [+] (pic) - S.Gross(in pa) 18:25:28 02/10/08 (2)
  • Re: ferguson plow - lonestarjeff 19:51:05 02/13/08 (1)
    • Re: ferguson plow - S.Gross(in Pa) 15:12:45 02/14/08 (0)

• Bought a nice spreader/seeder last summer [+] - 8Nwarrior(MI) 22:14:55 02/09/08 (5)
  • Re: Bought a nice spreader/seeder last summer - lonestarjeff 19:57:32 02/13/08 (2)
    • Re: Bought a nice spreader/seeder last summer - 8Nwarrior(MI) 21:49:22 02/13/08 (1)
      • Re: Bought a nice spreader/seeder last summer - lonestarjeff 22:02:35 02/13/08 (0)
  • Re: Bought a nice spreader/seeder last summer - Stumpy(NH) 08:16:26 02/10/08 (0)
  • Re: Bought a nice spreader/seeder last summer - Ed Gooding (VA) 06:17:11 02/10/08 (0)

• rusty plow [+] - Nilram MN 20:43:37 02/09/08 (3)
  • Re: rusty plow - Ed Gooding (VA) 06:21:06 02/10/08 (0)
  • Re: rusty plow - Jonas Hastings 23:13:01 02/09/08 (0)
  • Re: rusty plow - Farmer Dan 23:11:48 02/09/08 (0)

• Dearborn Planter [+] - Andy Snyder 14:13:32 02/09/08 (0)

• Chipper [+] - putttn 08:24:08 02/09/08 (5)
  • Re: Chipper - Bruce Dorsi 02:53:00 02/10/08 (2)
    • Re: Chipper - putttn 08:24:17 02/10/08 (1)
      • Re: Chipper (url) - Bruce Dorsi 11:31:23 02/11/08 (0)
  • Re: Chipper - Paladin (Bob In PA) 11:32:18 02/09/08 (0)
  • Re: Chipper - Ed Gooding (VA) 10:50:46 02/09/08 (0)

• Scalloped versus round coulters [+] - Paladin (Bob In PA) 20:31:03 02/08/08 (3)
  • Re: Scalloped versus round coulters - S.Gross(in pa) 07:56:41 02/09/08 (0)
  • Re: Scalloped versus round coulters - Ed Gooding (VA) 04:33:40 02/09/08 (0)
  • Re: Scalloped versus round coulters - Joe T (CO) 20:39:29 02/08/08 (0)

• New toy...........errrrrr................tool....that's it! [+] - Ed Gooding (VA) 08:00:57 02/08/08 (2)
  • Re: New toy...........errrrrr................tool....that's it! - lonestarjeff 18:40:23 02/08/08 (0)
  • Re: New toy...........errrrrr................tool....that's it! - LeeMo 10:02:15 02/08/08 (0)

• sickle bar mower [+] - gary broom 13:04:39 02/07/08 (7)
  • Re: sickle bar mower - awhtx 22:04:57 02/07/08 (1)
    • Re: sickle bar mower - Ed Gooding (VA) 08:05:48 02/08/08 (0)
  • Re: sickle bar mower - KCM 15:48:35 02/07/08 (0)
  • Re: sickle bar mower (url) - Jonas Hastings 13:51:31 02/07/08 (0)
  • Re: sickle bar mower - Jim.UT 13:25:02 02/07/08 (2)
    • Re: sickle bar mower - gary broom 20:04:25 02/07/08 (1)
      • Re: sickle bar mower - Ed Gooding (VA) 06:37:05 02/08/08 (0)

• Cutting Edge for BlackHawk Dozer Blade [+] - Al-WI 14:55:58 02/05/08 (2)
  • Re: Cutting Edge for BlackHawk Dozer Blade - Stumpy(NH) 06:40:54 02/07/08 (0)
  • Re: Cutting Edge for BlackHawk Dozer Blade - LeeMo 17:34:52 02/05/08 (0)

• Disk Scrapers [+] - Old Ag 12:49:00 02/04/08 (5)
  • Re: Disk Scrapers - Ed Gooding (VA) 07:26:08 02/05/08 (2)
    • Re: Disk Scrapers - Old Ag 08:41:14 02/05/08 (1)
      • Re: Disk Scrapers - Ed Gooding (VA) 05:11:29 02/06/08 (0)
  • Re: Disk Scrapers - Ken in Arkansas 13:33:22 02/04/08 (1)
    • Re: Disk Scrapers - Old Ag 13:53:58 02/04/08 (0)

• Dearborn ? rake [+] - BrianS, NE 21:00:19 02/03/08 (3)
  • Re: Dearborn ? rake (url) - KCM 11:44:11 02/06/08 (0)
  • Re: Dearborn ? rake - Ed Gooding (VA) 21:23:53 02/03/08 (1)
    • Re: Dearborn ? rake - BrianS, NE 21:44:23 02/04/08 (0)

• 2 bottem disc plow [+] - Butch in Me 16:07:25 02/02/08 (14)
  • Re: 2 bottem disc plow (pic) - Jonas Hastings 14:26:17 02/03/08 (9)
    • Re: 2 bottem disc plow - Butch in Me 17:08:38 02/03/08 (8)
      • Re: 2 bottem disc plow - Ed Gooding (VA) 17:15:21 02/03/08 (7)
        • Re: 2 bottem disc plow - Butch in Me 19:42:40 02/03/08 (6)
          • Re: 2 bottem disc plow - Ed Gooding (VA) 21:02:54 02/03/08 (0)
          • Re: 2 bottem disc plow (url) - Jonas Hastings 19:48:22 02/03/08 (4)
            • Re: 2 bottem disc plow - Ed Gooding (VA) 21:12:25 02/03/08 (3)
              • Re: 2 bottem disc plow - Butch in Me 06:29:26 02/04/08 (0)
              • Re: 2 bottem disc plow - Jonas Hastings 21:31:47 02/03/08 (1)
                • Re: 2 bottem disc plow - Ed Gooding (VA) 16:32:39 02/06/08 (0)
  • Re: 2 bottem disc plow - Ed Gooding (VA) 06:41:48 02/03/08 (3)
    • Re: 2 bottem disc plow - Butch in Me 07:27:19 02/03/08 (2)
      • Re: 2 bottem disc plow - Ed Gooding (VA) 08:37:10 02/03/08 (1)
        • Re: 2 bottem disc plow - Butch in Me 10:12:09 02/03/08 (0)

• Help me identify a post hole digger [+] - Paladin (Bob In PA) 15:39:05 02/01/08 (0)

• Help me identify plow and disc [+] - Brian Glynn 09:06:41 01/30/08 (3)
  • Re: Help me identify plow and disc - Ed Gooding (VA) 06:08:01 01/31/08 (0)
  • Re: Help me identify plow and disc - lonestarjeff 21:29:59 01/30/08 (0)
  • Re: Help me identify plow and disc - Ken in Arkansas 13:21:01 01/30/08 (0)

• wanted-power steering for NAA [+] - Richard Brock 20:10:48 01/28/08 (2)
  • Re: wanted-power steering for NAA - Ed Gooding (VA) 06:04:49 01/29/08 (1)
    • Re: wanted-power steering for NAA - Richard Brock 09:29:30 01/29/08 (0)

• Back Blade questions [+] - Farmer Dan 18:09:18 01/21/08 (5)
  • Re: Back Blade questions - LeeMo 11:10:38 01/22/08 (0)
  • Re: Back Blade questions - Ed Gooding (VA) 06:01:04 01/22/08 (3)
    • Re: Back Blade questions - Farmer Dan 21:22:08 01/25/08 (1)
      • Re: Back Blade questions - Ed Gooding (VA) 06:44:06 01/26/08 (0)
    • Re: Back Blade questions - Farmer Dan 19:01:41 01/22/08 (0)

• ford 2 bottom plow [+] - scott gross 20:23:06 01/20/08 (1)
  • Re: ford 2 bottom plow - Tim Daley(MI) 12:07:44 01/21/08 (0)

• JD Coulters on a Ferguson? [+] (url) - Old Ag 12:09:50 01/15/08 (2)
  • Re: JD Coulters on a Ferguson? - Tim Daley(MI) 12:30:44 01/21/08 (0)
  • Re: JD Coulters on a Ferguson? - AL CT 19:05:20 01/15/08 (0)

• 8N Front Wheel Weights [+] - Paladin (Bob in PA) 11:11:48 01/15/08 (1)
  • Re: 8N Front Wheel Weights - Farmer Dan 21:25:05 01/15/08 (0)

• need info and help on 20-9 [+] - Doug Cox 15:29:37 01/12/08 (5)
  • Re: need info and help on 20-9 - Ed Gooding (VA) 20:08:45 01/12/08 (4)
    • Re: need info and help on 20-9 - Doug Cox 21:31:26 01/12/08 (1)
      • Re: need info and help on 20-9 - Ed Gooding (VA) 06:38:12 01/13/08 (0)
    • Re: need info and help on 20-9 - Doug Cox 21:31:08 01/12/08 (0)
    • Re: need info and help on 20-9 - Doug Cox 20:57:35 01/12/08 (0)

• help identify planter [+] - J. Miller 12:23:11 01/09/08 (8)
  • Re: help identify planter - Ed Gooding (VA) 07:20:10 01/11/08 (0)
  • Re: help identify planter - Ed Gooding (VA) 21:23:06 01/09/08 (6)
    • Re: help identify planter - Jeff Miller 21:45:13 01/09/08 (5)
      • attn: Jeff - Bruce Dorsi 15:26:09 01/13/08 (0)
      • Re: help identify planter - Ed Gooding (VA) 05:34:55 01/12/08 (0)
      • Re: help identify planter - Bruce Dorsi 11:14:04 01/11/08 (2)
        • Re: help identify planter - Ed Gooding (VA) 06:36:01 01/12/08 (1)
          • Re: help identify planter - Bruce Dorsi 15:21:05 01/13/08 (0)

• Plow rebuild update [+] - Steve(WI) 20:34:21 01/08/08 (1)
  • Re: Plow rebuild update - Scott PA 21:23:58 01/08/08 (0)

• Help ID--Anyone ever see these on a Dearborn Plow? [+] - 8N'r--WI 13:05:56 01/08/08 (7)
  • Re: Help ID--Anyone ever see these on a Dearborn Plow? - Tim Daley(MI) 13:13:22 01/10/08 (1)
    • Re: Help ID--Anyone ever see these on a Dearborn Plow? - 8N'r--WI 16:06:35 01/10/08 (0)
  • Re: Help ID--Anyone ever see these on a Dearborn Plow? - Steve(WI) 20:27:46 01/08/08 (0)
  • Re: Help ID--Anyone ever see these on a Dearborn Plow? - lonestarjeff 19:14:55 01/08/08 (0)
  • Re: Help ID--Anyone ever see these on a Dearborn Plow? - Al - WI 16:52:06 01/08/08 (2)
    • Re: Help ID--Anyone ever see these on a Dearborn Plow? - 8N'r--WI 22:06:41 01/08/08 (1)
      • Re: Help ID--Anyone ever see these on a Dearborn Plow? - AL - WI 01:22:29 01/09/08 (0)