N Board Forum - Expanded Thread Page

Subject: 1940 9N I Think.

[Back] [Return to Top of Forum]

Rob Blauvelt    Posted 05-14-2017 at 13:00:02 [URL] [DELETE]        [Reply] [Email]  
  • 1940 9N I Think.
  • Hello all:

    This is my first time posting. I have what I think is a 1940 9N according to the number on the engine block. I am however, not sure it is ALL 1940. Would this be the appropriate place to post some pics for help in positively identifying my machine?

    Regards,

    Rob

    Tim Daley(MI)    Posted 05-16-2017 at 05:11:11 [URL] [DELETE]        [Reply] [No Email]  
  • ROBS' PICTURES
  • HCooke    Posted 05-15-2017 at 08:23:04 [URL] [DELETE]        [Reply] [Email]  
  • Re: 1940 9N I Think.
  • Like to see photos. With these old machines lots of changes could have occurred. Still possible to find one that is mostly original. Study John Smith's web site to help identify your tractor.

    Rob Blauvelt    Posted 05-15-2017 at 23:06:43 [URL] [DELETE]        [Reply] [Email]  
  • Re: 1940 9N I Think.
  • Wow. I looked at the Smith website, goodness it has a bunch of info. Thanks for the tip. Turns out it is a '42 2N. That explains some of the parts that seemed out of place.

    Dave(OK)    Posted 05-16-2017 at 12:50:48 [URL] [DELETE]        [Reply] [Email]  
  • Re: 1940 9N I Think.
  • 9N122996 is a 1943 according to John Smiths' website.

    Kirk-NJ    Posted 05-15-2017 at 05:30:31 [URL] [DELETE]        [Reply] [Email]  
  • Re: 1940 9N I Think.
  • What are the numbers for your '40?

    Rob Blauvelt    Posted 05-15-2017 at 21:17:05 [URL] [DELETE]        [Reply] [Email]  
  • Re: 1940 9N I Think.
  • Thanks for the reply. And thanks everyone who replied. The number on the engine block is as follows... 9N122996
    And here are a few pics. Again...thanks for the responses and it sounds like at least one of you has an addiction ;)
    http://i61.photobucket.com/albums/h68/roofus72749398/IMG_20170504_194825385_zpsogk2xdvt.jpg
    http://i61.photobucket.com/albums/h68/roofus72749398/IMG_20170504_195112686_zpsawkgsczz.jpg
    http://i61.photobucket.com/albums/h68/roofus72749398/IMG_20170504_194928966_zpsjwamrc3p.jpg
    http://i61.photobucket.com/albums/h68/roofus72749398/IMG_20170504_195016389_zpsd2mkb6ts.jpg

    Bruce(OR)    Posted 05-14-2017 at 19:32:29 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 1940 9N I Think.
  • 1940 9N. The machine that my wife found and started me on this trip. It sold off long ago and at times, wish I had it back. Then again... Well, as this is your first machine, just remember in the future, each implement deserves it's own machine especially as this saves the time of swapping back and forth. You should never have more implements than machines. That means I am missing at least 1/2 dozen more machines around here.
    Should the wife balk at the idea of multiple machines, invite her to swap implement's next time and save you the difficulty because it is easy enough to do, No?
    Good luck on the new machine. Better luck on the next one. Just remember, the more, the merrier.

    carl nny    Posted 05-14-2017 at 13:25:25 [URL] [DELETE]        [Reply] [Email]  
  • Re: 1940 9N I Think.
  • Post away, you came to the right place. Pictures are always good and their are a lot of guys on this site that are very knowledgeable that will be more than willing to help. Also you can go to our links section and click on John Smith's site, you just might find answers to all or most of your questions. HTH's

    carl nny

    Rob Blauvelt    Posted 05-18-2017 at 00:01:03 [URL] [DELETE]        [Reply] [Email]  
  • Re: 1940 9N I Think.
  • Thanks for the info. I think I have my question answered for now. I'm from Northern Colorado, I'd like to find a club locally.

    carl nny    Posted 05-18-2017 at 19:36:59 [URL] [DELETE]        [Reply] [Email]  
  • Re: 1940 9N I Think.
  • Can't help you on a club in Colorado, I live in the western foothills of the Adirondack Mt's in New York.

    [Back] [Return to Top of Forum]


    Top