Topics Related to Ford 9N, 2N, 8N, & NAA Tractors
	Post a Message | FAQ | Archives | Posting Policy | Contact NTC
	Image Verification Feature (Click here for more information.)
	*Don't forget to refresh/reload the page after posting a message. (Instructions)

---

• Randolph Farm Equipment Asheboro NC Liquidation [+] (url) - Luvmytractor 06:36:37 03/12/10 (0)

• oil pressure [+] - jim in pgh 23:10:17 03/11/10 (2)
  • Re: oil pressure - Charles (N.C.) 23:34:47 03/11/10 (0)
  • Re: oil pressure - Russ SoCal 23:33:31 03/11/10 (0)

• Hydraulic pump for 8n loader [+] - Thyman Vandenbrink 22:00:58 03/11/10 (2)
  • Re: Hydraulic pump for 8n loader - TheOldHokie 07:18:26 03/12/10 (0)
  • Re: Hydraulic pump for 8n loader (url) - Russ SoCal 00:01:10 03/12/10 (0)

• Don on parts cleaning [+] - Dave H 16:19:03 03/11/10 (1)
  • Re: Don on parts cleaning - Don Doan 22:20:50 03/11/10 (0)

• 2N FORD WON'T RUN [+] - SUES 16:11:50 03/11/10 (3)
  • Re: 2N FORD WON'T RUN - soundguy 17:21:41 03/11/10 (2)
    • Re: 2N FORD WON'T RUN - SUES 17:29:04 03/11/10 (1)
      • Re: 2N FORD WON'T RUN - soundguy 17:38:50 03/11/10 (0)

• alternator bracket on front distrib 8n [+] - mike kaminski 16:04:55 03/11/10 (1)
  • Re: alternator bracket on front distrib 8n - don b 16:42:09 03/11/10 (0)

• Loading Tires [+] - farmerbrain 14:49:03 03/11/10 (8)
  • Re: Loading Tires - Jimmyjack 00:05:20 03/12/10 (1)
    • Re: Loading Tires - Ed Gooding (VA) 05:47:28 03/12/10 (0)
  • Re: Loading Tires - WayneinMaine 21:45:50 03/11/10 (0)
  • Re: Loading Tires - John (TR) 20:11:15 03/11/10 (0)
  • Re: Loading Tires - soundguy 17:24:42 03/11/10 (0)
  • Re: Loading Tires - Kevin(FL) 17:10:57 03/11/10 (0)
  • Re: Loading Tires - Jon Rhee (RI) 15:53:02 03/11/10 (1)
    • Re: Loading Tires (url) - Russ SoCal 16:23:15 03/11/10 (0)

• Removing Differential Carrier Bearing Cones/With More Effort [+] - Kevin(FL) 13:59:49 03/11/10 (9)
  • Re: Removing Differential Carrier Bearing Cones/With More Effort - Paul in MN 20:31:03 03/11/10 (0)
  • Re: Removing Differential Carrier Bearing Cones/With More Effort - Dan 16:24:04 03/11/10 (1)
    • Re: Removing Differential Carrier Bearing Cones/With More Effort - Kevin(FL) 16:49:49 03/11/10 (0)
  • Re: Removing Differential Carrier Bearing Cones/With More Effort - TheOldHokie 14:26:18 03/11/10 (5)
    • Re: Removing Differential Carrier Bearing Cones/With More Effort - Kevin(FL) 16:33:52 03/11/10 (4)
      • Re: Removing Differential Carrier Bearing Cones/With More Effort - John (TR) 20:07:45 03/11/10 (1)
        • The Puller Is a 2 or 3 jaw, depending how you set it up. - Kevin(FL) 21:42:36 03/11/10 (0)
      • Re: Removing Differential Carrier Bearing Cones/With More Effort - TheOldHokie 17:42:37 03/11/10 (1)
        • Re: Removing Differential Carrier Bearing Cones/With More Effort - Kevin(FL) 21:51:55 03/11/10 (0)

• Removing & Replacing More Bearings With PICS [+] - Kevin(FL) 12:38:59 03/11/10 (14)
  • Re: Removing & Replacing More Bearings With PICS - Paul in MN 20:02:54 03/11/10 (0)
  • Re: Removing & Replacing More Bearings With PICS - RichardNY9N 19:40:58 03/11/10 (2)
    • Shop Press Info - Kevin(FL) 22:44:46 03/11/10 (0)
    • Re: Removing & Replacing More Bearings With PICS - John (TR) 20:06:25 03/11/10 (0)
  • Re: Removing & Replacing More Bearings With PICS - John (TR) 13:26:39 03/11/10 (1)
    • Re: Removing & Replacing More Bearings With PICS - Kevin(FL) 16:52:04 03/11/10 (0)
  • Re: Removing & Replacing More Bearings With PICS - Kurt-NEPA 12:54:58 03/11/10 (7)
    • Re: Removing & Replacing More Bearings With PICS - Kevin(FL) 16:40:20 03/11/10 (6)
      • Re: Removing & Replacing More Bearings With PICS - Kurt-NEPA 16:47:13 03/11/10 (5)
        • Re: Removing & Replacing More Bearings With PICS - Kevin(FL) 17:07:06 03/11/10 (4)
          • Re: Removing & Replacing More Bearings With PICS - Kurt-NEPA 19:22:20 03/11/10 (1)
            • Re: Removing & Replacing More Bearings With PICS - Kevin(FL) 22:31:38 03/11/10 (0)
          • Re: Removing & Replacing More Bearings With PICS - Dan(NYC) 18:42:12 03/11/10 (1)
            • Re: Removing & Replacing More Bearings With PICS - Kevin(FL) 22:17:24 03/11/10 (0)

• Todays Progress [+] - Hardacrefarm 00:02:24 03/11/10 (3)
  • HMMMM - Dave Smith 07:10:29 03/11/10 (2)
    • Re: HMMMM - Hardacrefarm 10:17:13 03/11/10 (0)
    • Re: HMMMM - soundguy 10:06:12 03/11/10 (0)

• Am I crazy? [+] - Matt 22:33:49 03/10/10 (11)
  • Re: Am I crazy? - Matt 20:00:28 03/11/10 (0)
  • Re: Am I crazy? - Russ SoCal 13:10:47 03/11/10 (0)
  • Re: Am I crazy? (url) - Stevo 11:16:10 03/11/10 (0)
  • Re: Am I crazy? - soundguy 10:13:11 03/11/10 (0)
  • Re: Am I crazy? (url) - Kurt-NEPA 10:06:37 03/11/10 (0)
  • Re: Am I crazy? - Paladin (Bob In PA) 08:08:32 03/11/10 (0)
  • Re: Am I crazy? - Larry Akin 07:31:49 03/11/10 (0)
  • Different angle - John (TR) 05:05:08 03/11/10 (0)
  • Re: Am I crazy? - Jimmyjack 23:40:32 03/10/10 (0)
  • Re: Am I crazy? - charles in Louisiana 23:31:31 03/10/10 (0)
  • Re: Am I crazy? - Charles (N.C.) 22:54:51 03/10/10 (0)

• I need a wiring diagram [+] - Brett Jones 16:41:35 03/10/10 (3)
  • Re: I need a wiring diagram (pic) - Jim.UT 22:06:06 03/10/10 (0)
  • Re: I need a wiring diagram - JMOR 19:05:03 03/10/10 (0)
  • Re: I need a wiring diagram - K.LaRue-VA 17:39:28 03/10/10 (0)

• moving dirt [+] - Doug 16:15:24 03/10/10 (5)
  • Re: moving dirt - Farmer Dan 18:44:54 03/10/10 (2)
    • Re: moving dirt - Doug 19:22:07 03/10/10 (1)
      • Re: moving dirt - Ed Gooding (VA) 05:51:57 03/12/10 (0)
  • Re: moving dirt - K.LaRue-VA 17:56:30 03/10/10 (1)
    • Re: moving dirt - Dave H 18:27:58 03/10/10 (0)

• Jubilee: 6v to 12, what battery to use? (Original bracket) [+] - Ray Wilson 15:36:15 03/10/10 (4)
  • Re: Jubilee: 6v to 12, what battery to use? (Original bracket) - soundguy 10:17:50 03/11/10 (0)
  • Re: Jubilee: 6v to 12, what battery to use? (Original bracket) - Walt/Tx 16:42:17 03/10/10 (2)
    • Re: Jubilee: 6v to 12, what battery to use? (Original bracket) - Ray Wilson 18:00:48 03/10/10 (1)
      • Re: Jubilee: 6v to 12, what battery to use? (Original bracket) - K.LaRue-VA 18:19:57 03/10/10 (0)

• ford 600 staring button [+] - chuck 14:55:51 03/10/10 (3)
  • Re: ford 600 staring button - Ed Gooding (VA) 07:30:06 03/12/10 (0)
  • Re: ford 600 staring button - Mashbox 15:22:26 03/10/10 (1)
    • Re: ford 600 staring button - Mashbox 07:34:51 03/12/10 (0)

• Bush hog [+] - leega 09:24:54 03/10/10 (11)
  • Re: Bush hog - Steve J 20:47:34 03/11/10 (0)
  • Re: Bush hog - 8N'r--WI 14:14:36 03/10/10 (0)
  • Re: Bush hog (url) (pic) - wwildhorse2k 13:57:53 03/10/10 (1)
    • Re: Bush hog - wwildhorse2k 14:11:59 03/10/10 (0)
  • Re: Bush hog - RustyAL 12:23:49 03/10/10 (0)
  • Re: Bush hog - Paladin (Bob In PA) 10:09:47 03/10/10 (0)
  • Re: Bush hog - soundguy 09:44:07 03/10/10 (4)
    • Re: Bush hog - leega 10:07:20 03/10/10 (3)
      • Re: Bush hog - soundguy 10:23:01 03/10/10 (2)
        • Re: Bush hog - Tim 14:00:58 03/10/10 (1)
          • Re: Bush hog - leega 16:19:15 03/10/10 (0)

• TO-20 / TO-30 interchangability?? [+] - DanP 09:07:04 03/10/10 (3)
  • Re: TO-20 / TO-30 interchangability?? - Kirk-NJ 05:24:24 03/11/10 (0)
  • Re: TO-20 / TO-30 interchangability?? - John (TR) 10:58:44 03/10/10 (0)
  • Re: TO-20 / TO-30 interchangability?? - soundguy 10:24:00 03/10/10 (0)

• 8N brackets....No pics [+] - Bruce(OR) 02:10:02 03/10/10 (5)
  • Re: 8N brackets....No pics - Paladin (Bob of PA) 09:42:39 03/10/10 (1)
    • Re: 8N brackets....No pics - DanP 10:42:06 03/10/10 (0)
  • Re: 8N brackets....No pics - Ed Gooding (VA) 08:21:24 03/10/10 (1)
    • Re: 8N brackets....No pics - Bruce(OR) 08:36:28 03/10/10 (0)
  • Re: 8N brackets....No pics (url) - mhb@ufe 07:55:11 03/10/10 (0)

• NAA Motor Oil [+] - Steve 22:37:24 03/09/10 (3)
  • Re: NAA Motor Oil - Josh Cronk 19:10:04 03/10/10 (0)
  • Re: NAA Motor Oil (url) - Bruce (VA) 08:58:15 03/10/10 (0)
  • Re: NAA Motor Oil - Larry 22:55:35 03/09/10 (0)

• Resistor, which one [+] - Carl Bacon 22:37:18 03/09/10 (11)
  • Re: Resistor, which one - don b 17:10:28 03/11/10 (0)
  • Re: Resistor, which one - JMOR 23:07:17 03/09/10 (9)
    • Re: Resistor, which one - Carl Bacon 23:15:05 03/09/10 (8)
      • Re: Resistor, which one - JMOR 00:12:09 03/10/10 (7)
        • Re: Resistor, which one - Carl Bacon 00:15:53 03/10/10 (6)
          • Re: Resistor, which one - Paladin (Bob In PA) 09:51:20 03/10/10 (0)
          • Re: Resistor, which one (url) (pic) - Bruce (VA) 09:11:31 03/10/10 (4)
            • Re: Resistor, which one - Carl Bacon 11:24:05 03/10/10 (3)
              • Re: Resistor, which one - Bruce (VA) 18:14:37 03/10/10 (0)
              • Re: Resistor, which one - Paladin (Bob In PA) 12:54:07 03/10/10 (1)
                • CRS disease - Paladin (Bob In PA) 13:09:59 03/10/10 (0)

• 50yr. collection of Ford & NOS parts in NY [+] - Zack(NC) 21:36:09 03/09/10 (8)
  • Re: 50yr. collection of Ford & NOS parts in NY - Jonas Hastings 06:26:05 03/11/10 (0)
  • Gonna be there - Paladin (Bob In PA) 20:59:08 03/10/10 (0)
  • Re: 50yr. collection of Ford & NOS parts in NY (pic) - Stumpy(NH) 18:06:46 03/10/10 (1)
    • Re: 50yr. collection of Ford & NOS parts in NY - Chris(TN) 18:50:33 03/10/10 (0)
  • Re: 50yr. collection of Ford & NOS parts in NY - Chris(TN) 06:16:59 03/10/10 (2)
    • Re: 50yr. collection of Ford & NOS parts in NY - Ken(Ark) 20:18:46 03/10/10 (1)
      • Re: 50yr. collection of Ford & NOS parts in NY - Chris(TN) 21:33:46 03/10/10 (0)
  • link (url) - Russ SoCal 01:26:03 03/10/10 (0)

• What a Difference a Year Makes! [+] - Don Doan 21:15:46 03/09/10 (8)
  • Re: What a Difference a Year Makes! - Dave H 08:55:36 03/11/10 (1)
    • Re: What a Difference a Year Makes! - Don Doan 11:32:38 03/11/10 (0)
  • Re: What a Difference a Year Makes! - StanNMi 20:26:56 03/10/10 (0)
  • Re: What a Difference a Year Makes! - Farmer Dan 18:53:59 03/10/10 (1)
    • Re: What a Difference a Year Makes! (url) - Don Doan 22:04:50 03/10/10 (0)
  • Re: What a Difference a Year Makes! - Chris(TN) 06:21:07 03/10/10 (0)
  • Re: What a Difference a Year Makes! - Larry (TX) 23:35:21 03/09/10 (0)
  • Re: What a Difference a Year Makes! - JMOR 21:28:55 03/09/10 (0)

• Looking for new Tractor [+] - Petersen 21:05:28 03/09/10 (5)
  • Re: Looking for new Tractor - Paladin (Bob In PA) 10:03:32 03/10/10 (0)
  • Re: Looking for new Tractor - John (TR) 05:33:47 03/10/10 (0)
  • Re: Looking for new Tractor (pic) - Jim.UT 21:26:44 03/09/10 (2)
    • Re: Looking for new Tractor - Mark B. Williams 10:34:21 03/10/10 (0)
    • Re: Looking for new Tractor - Dave H 09:09:37 03/10/10 (0)

• Larry Steed's 1958 Ford 961 PowerMaster, Serial No. 48379 [+] - Tyler (MD) 20:14:35 03/09/10 (3)
  • Re: Larry Steed's 1958 Ford 961 PowerMaster, Serial No. 48379 - John (TR) 05:49:29 03/10/10 (0)
  • Re: Larry Steed's 1958 Ford 961 PowerMaster, Serial No. 48379 - Sean (TX) 20:19:50 03/09/10 (1)
    • Re: Larry Steed's 1958 Ford 961 PowerMaster, Serial No. 48379 - soundguy 11:20:59 03/10/10 (0)

• Hupp Stuck In 2 Gears Fix [+] - RustyAL 19:16:51 03/09/10 (2)
  • Re: Hupp Stuck In 2 Gears Fix - Bruce(OR) 02:03:27 03/10/10 (1)
    • Re: Hupp Stuck In 2 Gears Fix - RustyAL 12:15:06 03/10/10 (0)

• What does "all pistons extended" mean .. [+] - Jim 17:51:50 03/09/10 (2)
  • Re: What does "all pistons extended" mean .. - soundguy 19:06:31 03/09/10 (0)
  • Re: What does "all pistons extended" mean .. - Farmer Dan 18:08:49 03/09/10 (0)

• Bower Bearings [+] - RustyAL 13:57:11 03/09/10 (1)
  • Re: Bower Bearings - Dave H 18:02:01 03/09/10 (0)

• Hupp Install [+] - RustyAL 13:41:45 03/09/10 (1)
  • Re: Hupp Install - R Geiger 14:43:56 03/09/10 (0)

• Hand Crank [+] - Butch in Me 09:05:48 03/09/10 (4)
  • Re: Hand Crank - Danny 17:03:59 03/09/10 (0)
  • Re: Hand Crank - Kirk-NJ 13:39:46 03/09/10 (0)
  • Re: Hand Crank - Paladin (Bob InPA 09:13:53 03/09/10 (1)
    • Re: Hand Crank - Butch in Me 09:59:27 03/09/10 (0)

• Fair weather tractor? [+] - RichieRich 07:44:02 03/09/10 (10)
  • Re: Fair weather tractor? - CaribooHarry 14:43:14 03/09/10 (0)
  • Re: Fair weather tractor? - Steve J 13:17:44 03/09/10 (0)
  • Re: Fair weather tractor? - Stevo 09:59:19 03/09/10 (1)
    • Re: Fair weather tractor? - R Geiger 12:42:39 03/09/10 (0)
  • Re: Fair weather tractor? - soundguy 09:50:45 03/09/10 (5)
    • Re: Fair weather tractor? - RichieRich 11:34:34 03/09/10 (4)
      • Re: Fair weather tractor? - Paul O 20:59:50 03/09/10 (0)
      • Re: Fair weather tractor? - Stevo 12:46:42 03/09/10 (0)
      • Re: Fair weather tractor? - soundguy 11:58:31 03/09/10 (1)
        • Re: Fair weather tractor? - John (TR) 15:17:41 03/09/10 (0)

• Anybody need a Carb? [+] - Chris(TN) 07:16:13 03/09/10 (4)
  • Re: Anybody need a Carb? (url) - Russ SoCal 09:47:27 03/09/10 (3)
    • Re: Anybody need a Carb? - Chad 13:39:54 03/09/10 (2)
      • Re: Anybody need a Carb? - Jim.UT 21:30:07 03/09/10 (0)
      • Re: Anybody need a Carb? - Joe T (CO) 20:54:10 03/09/10 (0)

• Tractor dilemma [+] - Jimmyjack 00:05:29 03/09/10 (11)
  • Re: Tractor dilemma - Chad 13:43:04 03/09/10 (0)
  • Re: Tractor dilemma - don b 13:04:57 03/09/10 (0)
  • Re: Tractor dilemma - Larry (TX) 10:43:23 03/09/10 (1)
    • Re: Tractor dilemma - heybusdriver 23:07:25 03/09/10 (0)
  • Re: Tractor dilemma - mark b. williams 10:00:45 03/09/10 (0)
  • Re: Tractor dilemma - soundguy 09:59:40 03/09/10 (0)
  • Re: Tractor dilemma - Paladin (Bob In PA) 09:32:27 03/09/10 (0)
  • Re: Tractor dilemma - mark b. williams 07:22:28 03/09/10 (1)
    • Re: Tractor dilemma - BUS 09:10:23 03/09/10 (0)
  • Re: Tractor dilemma - Dollar Bill 05:47:43 03/09/10 (0)
  • Re: Tractor dilemma - R Geiger 00:11:05 03/09/10 (0)

• Painting/ Same Subject & Deliema [+] - Charles (N.C.) 20:51:21 03/08/10 (3)
  • Re: Painting/ Same Subject & Deliema - Dollar Bill 05:44:13 03/09/10 (0)
  • Re: Painting/ Same Subject & Deliema - John (TR) 21:17:30 03/08/10 (1)
    • Re: Painting/ Same Subject & Deliema - RichardNY9N 22:54:11 03/08/10 (0)

• My friend has a problem -really [+] - TheOldHokie 19:27:09 03/08/10 (20)
  • Re: My friend has a problem -really - TimW(PA) 21:38:17 03/09/10 (1)
    • Re: My friend has a problem -really - TheOldHokie 09:48:23 03/10/10 (0)
  • Re: My friend has a problem -really - Jim.UT 21:35:57 03/09/10 (0)
  • More info this time - TheOldHokie 08:23:01 03/09/10 (5)
    • Re: More info this time - Jim 12:04:56 03/09/10 (4)
      • Re: More info this time - TheOldHokie 12:58:14 03/09/10 (3)
        • Re: More info this time - Jim 13:57:24 03/09/10 (2)
          • Re: More info this time - TheOldHokie 15:28:46 03/09/10 (1)
            • Re: More info this time - Jack - Iowa 22:11:15 03/09/10 (0)
  • Re: My friend has a problem -really - John Murphy 07:05:47 03/09/10 (0)
  • Re: My friend has a problem -really - Pip 06:37:32 03/09/10 (0)
  • Re: My friend has a problem -really (url) - Ken(Ark) 21:32:58 03/08/10 (1)
    • drill bit extensions (url) - Ken(Ark) 21:45:46 03/08/10 (0)
  • Re: My friend has a problem -really - John (TR) 21:19:48 03/08/10 (0)
  • Re: My friend has a problem -really - Dean 21:05:23 03/08/10 (0)
  • Re: My friend has a problem -really - Charles (N.C.) 20:23:30 03/08/10 (0)
  • Re: My friend has a problem -really - Dan 2N 20:18:18 03/08/10 (3)
    • Re: My friend has a problem -really - TheOldHokie 20:34:48 03/08/10 (2)
      • Re: My friend has a problem -really - Jack - Iowa 21:33:54 03/08/10 (0)
      • Re: My friend has a problem -really - Dean 21:02:33 03/08/10 (0)

• Can a battery have too many CCA? [+] - Paladin (Bob In PA) 18:17:25 03/08/10 (13)
  • Speaking Of This... - Hardacrefarm 20:35:11 03/08/10 (4)
    • Why so many ratings - Randy(PA) 12:44:37 03/09/10 (1)
      • Re: Why so many ratings - K.LaRue-VA 14:02:30 03/09/10 (0)
    • Re: Speaking Of This... - Ken(Ark) 21:17:32 03/08/10 (1)
      • This battery has dual terminals - Paladin (Bob In PA) 22:09:05 03/08/10 (0)
  • Re: Can a battery have too many CCA? - Charles (N.C.) 20:33:04 03/08/10 (0)
  • Re: Can a battery have too many CCA? - TheOldHokie 19:21:55 03/08/10 (2)
    • Re: Can a battery have too many CCA? - Paladin (Bob In PA) 22:01:03 03/08/10 (1)
      • Re: Can a battery have too many CCA? - TheOldHokie 15:35:09 03/09/10 (0)
  • Re: Can a battery have too many CCA? - Russ SoCal 18:54:24 03/08/10 (0)
  • NO ORANGE TRACTORS ON NBOARD!!!? - Stevo 18:46:45 03/08/10 (0)
  • Only if it flips the tractor.... - Stumpy(NH) 18:31:41 03/08/10 (1)
    • Re: Only if it flips the tractor.... - 9N OKIE 19:43:46 03/08/10 (0)

• ARPS tracks with Sherman trans [+] - Lyndon Satchell 09:31:38 03/08/10 (1)
  • Re: ARPS tracks with Sherman trans - Jacob Hudson Wa 09:40:11 03/08/10 (0)

• NAA Update [+] - ClarkR 07:43:12 03/08/10 (5)
  • Re: NAA Update - soundguy 12:03:26 03/08/10 (4)
    • Re: NAA Update - feron 19:18:11 03/08/10 (3)
      • Re: NAA Update - soundguy 21:09:22 03/08/10 (2)
        • Re: NAA Update - feron 22:48:25 03/08/10 (1)
          • Re: NAA Update - soundguy 09:45:55 03/09/10 (0)

• Michigan guys /gals Ionia Tractor Show. [+] - RichieRich 07:24:57 03/08/10 (1)
  • Re: Michigan guys /gals Ionia Tractor Show. - Tim Daley(MI) 13:20:55 03/08/10 (0)

• %^$#@ hydraulic lift [+] - bobsevy 06:42:38 03/08/10 (16)
  • Re: %^$#@ hydraulic lift - Rockbiter 13:50:17 03/08/10 (0)
  • Re: %^$#@ hydraulic lift - Ed Ridgeway CO 10:54:43 03/08/10 (1)
    • Re: %^$#@ hydraulic lift - Ed Ridgeway co 13:24:32 03/08/10 (0)
  • Re: %^$#@ hydraulic lift - TheOldHokie 09:57:44 03/08/10 (6)
    • Re: %^$#@ hydraulic lift - charles in Louisiana 11:39:15 03/08/10 (5)
      • Re: %^$#@ hydraulic lift - bobsevy 15:03:21 03/08/10 (4)
        • Re: %^$#@ hydraulic lift - charles in Louisiana 22:52:48 03/09/10 (3)
          • Re: %^$#@ hydraulic lift - bobsevy 12:04:14 03/10/10 (2)
            • Re: %^$#@ hydraulic lift - charles in Louisiana 23:53:44 03/10/10 (1)
              • Re: %^$#@ hydraulic lift - bobsevy 15:07:10 03/11/10 (0)
  • Re: %^$#@ hydraulic lift - mark b. williams 07:12:41 03/08/10 (5)
    • Re: %^$#@ hydraulic lift - bobsevy 07:19:31 03/08/10 (4)
      • Re: %^$#@ hydraulic lift - mark b. williams 07:24:28 03/08/10 (3)
        • Biloxi weather - Jack - Iowa 08:08:01 03/08/10 (2)
          • Re: Biloxi weather - mark b. williams 08:18:14 03/08/10 (1)
            • Re: Biloxi weather - Jack - Iowa 08:31:46 03/08/10 (0)

• Digital Hour / Tachometer [+] - boomer632 05:52:36 03/08/10 (6)
  • Re: Digital Hour / Tachometer - Dan 10:16:53 03/08/10 (0)
  • Re: Digital Hour / Tachometer - TheOldHokie 10:00:29 03/08/10 (4)
    • Re: Digital Hour / Tachometer - Farmer Dan 11:30:01 03/08/10 (3)
      • Re: Digital Hour / Tachometer - CaribooHarry 11:47:43 03/08/10 (0)
      • Re: Digital Hour / Tachometer - charles in Louisiana 11:45:28 03/08/10 (1)
        • Re: Digital Hour / Tachometer - charles in Louisiana 11:52:50 03/08/10 (0)

• Hydraulic Fitting Question [+] - Greybeard - PA 00:23:01 03/08/10 (3)
  • Re: Hydraulic Fitting Question - Russ SoCal 00:48:02 03/08/10 (2)
    • Re: Hydraulic Fitting Question - Greybeard - PA 06:12:59 03/08/10 (1)
      • Re: Hydraulic Fitting Question - TheOldHokie 09:52:43 03/08/10 (0)

• 9N carb problem [+] - Rick 21:30:33 03/07/10 (13)
  • Re: 9N carb problem - Paladin (Bob In PA) 22:25:15 03/07/10 (1)
    • Re: 9N carb problem - Jack - Iowa 23:03:05 03/07/10 (0)
  • Re: 9N carb problem - Charles (N.C.) 22:14:31 03/07/10 (0)
  • Re: 9N carb problem - woodworker40 21:38:27 03/07/10 (9)
    • Re: 9N carb problem - Rick 21:44:46 03/07/10 (8)
      • Re: 9N carb problem - Rick 06:09:04 03/08/10 (7)
        • Re: 9N carb problem - Paladin (Bob In PA) 18:31:24 03/08/10 (6)
          • Re: 9N carb problem - Casey'n'Ks. 20:24:38 03/08/10 (5)
            • Re: 9N carb problem - Rick 09:17:37 03/09/10 (2)
              • Re: 9N carb problem - Paladin (Bob In PA) 12:08:26 03/09/10 (1)
                • Re: 9N carb problem - Casey'n'Ks 21:35:40 03/09/10 (0)
            • Re: 9N carb problem - Rick 09:00:47 03/09/10 (1)
              • Re: 9N carb problem (url) - Kevin Singleton 12:03:01 03/09/10 (0)

• Rear axle nuts [+] - leega 20:19:03 03/07/10 (3)
  • Re: Rear axle nuts - Jim.UT 21:40:18 03/07/10 (0)
  • Re: Rear axle nuts - Sammy 21:05:36 03/07/10 (0)
  • Re: Rear axle nuts - soundguy 20:30:21 03/07/10 (0)

• Started & Generator armature [+] - Keith 44' 2N 19:06:29 03/07/10 (9)
  • Re: Started & Generator armature - BeeMO 22:33:37 03/11/10 (0)
  • Re: Started & Generator armature (pic) - JMOR 23:20:03 03/07/10 (2)
    • Re: Started & Generator armature - Keith 44' 2N 08:54:10 03/08/10 (1)
      • Re: Started & Generator armature - JMOR 12:39:50 03/08/10 (0)
  • Re: Started & Generator armature - soundguy 19:28:20 03/07/10 (4)
    • Re: Started & Generator armature - Keith 44' 2N 20:23:01 03/07/10 (3)
      • Re: Started & Generator armature - soundguy 20:26:38 03/07/10 (2)
        • Re: Started & Generator armature - Keith 44' 2N 20:33:43 03/07/10 (1)
          • Re: Started & Generator armature - soundguy 20:36:58 03/07/10 (0)

• Maude got some fresh air today [+] - Farmer Dan 15:28:08 03/07/10 (0)

• lubrication center pivot 8n front axle [+] - Joe Cline 14:09:24 03/07/10 (15)
  • Re: lubrication center pivot 8n front axle - Ultradog MN 08:12:18 03/08/10 (0)
  • Re: lubrication center pivot 8n front axle - R Geiger 14:18:09 03/07/10 (0)
  • Re: lubrication center pivot 8n front axle (url) - Bruce (VA) 14:17:25 03/07/10 (12)
    • Re: lubrication center pivot 8n front axle - Greybeard - PA 16:51:22 03/07/10 (11)
      • Re: lubrication center pivot 8n front axle - heybusdriver 21:52:11 03/07/10 (0)
      • Re: lubrication center pivot 8n front axle - John in Mich 20:52:48 03/07/10 (0)
      • Re: lubrication center pivot 8n front axle - Stumpy(NH) 19:47:20 03/07/10 (0)
      • Re: lubrication center pivot 8n front axle - Ken(Ark) 18:22:57 03/07/10 (0)
      • Re: lubrication center pivot 8n front axle (url) - Bruce (VA) 17:55:07 03/07/10 (2)
        • Re: lubrication center pivot 8n front axle - TheOldHokie 18:16:32 03/07/10 (1)
          • Re: lubrication center pivot 8n front axle - soundguy 18:30:35 03/07/10 (0)
      • Re: lubrication center pivot 8n front axle - Dave H 17:47:38 03/07/10 (0)
      • Re: lubrication center pivot 8n front axle - soundguy 17:30:21 03/07/10 (2)
        • Re: lubrication center pivot 8n front axle - Stumpy(NH) 19:43:28 03/07/10 (1)
          • Re: lubrication center pivot 8n front axle - soundguy 19:49:40 03/07/10 (0)

• Help with NAPA part numbers [+] - Farmer Dan 12:20:05 03/07/10 (1)
  • Re: Help with NAPA part numbers (url) (pic) - Bruce (VA) 13:05:41 03/07/10 (0)

• 4000 preliminary report [+] - soundguy 11:01:14 03/07/10 (2)
  • Re: 4000 preliminary report - Dan(nyc) 13:53:30 03/07/10 (1)
    • Re: 4000 preliminary report - soundguy 14:42:45 03/07/10 (0)

• Cleaning out crud [+] - Tim 10:01:25 03/07/10 (8)
  • Re: Cleaning out crud - heybusdriver 18:50:10 03/07/10 (0)
  • Re: Cleaning out crud - soundguy 13:22:56 03/07/10 (3)
    • Re: Cleaning out crud - Tim 16:23:35 03/07/10 (2)
      • Re: Cleaning out crud - AL (IN) 16:56:26 03/08/10 (0)
      • Re: Cleaning out crud - Joe Scribner 18:43:39 03/07/10 (0)
  • Re: Cleaning out crud (url) - Russ SoCal 12:23:57 03/07/10 (0)
  • Re: Cleaning out crud - Paladin (Bob In PA) 10:26:29 03/07/10 (0)
  • Re: Cleaning out crud - Ken-Pa 10:14:48 03/07/10 (0)

• cartridge type oil filter [+] - Joe C 08:52:39 03/07/10 (2)
  • Re: cartridge type oil filter - soundguy 10:49:06 03/07/10 (1)
    • Re: cartridge type oil filter - Ron 11:45:43 03/07/10 (0)

• Show season? Kinda [+] - John in Mich 17:01:55 03/06/10 (19)
  • Re: Show season? Kinda - Dave H 08:49:44 03/07/10 (1)
    • Re: Show season? Kinda - John in Mich 20:16:07 03/07/10 (0)
  • Re: Show season? Kinda - Farmer Dan 18:57:44 03/06/10 (7)
    • Re: Show season? Kinda - John in Mich 19:24:59 03/06/10 (6)
      • Re: Show season? Kinda - Farmer Dan 23:05:26 03/06/10 (5)
        • Re: Show season? Kinda - RichieRich 18:37:37 03/07/10 (4)
          • Re: Show season? Kinda - heybusdriver 21:59:02 03/07/10 (1)
            • Re: Show season? Kinda - RichieRich 07:11:56 03/08/10 (0)
          • Re: Show season? Kinda - John in Mich 20:23:53 03/07/10 (1)
            • Re: Show season? Kinda - RichieRich 07:14:50 03/08/10 (0)
  • Re: Show season? Kinda - Hardacrefarm 18:54:12 03/06/10 (8)
    • Re: Show season? Kinda - John in Mich 19:22:58 03/06/10 (7)
      • Re: Show season? Kinda - Farmer Dan 23:10:40 03/06/10 (0)
      • Re: Show season? Kinda - Cory G in MI 20:00:08 03/06/10 (5)
        • Re: Show season? Kinda - John in Mich 20:43:26 03/06/10 (0)
        • Re: Show season? Kinda - Charles (N.C.) 20:35:47 03/06/10 (3)
          • Re: Show season? Kinda - Don In France 04:21:59 03/07/10 (1)
            • Re: Show season? Kinda - John in Mich 20:37:05 03/07/10 (0)
          • Re: Show season? Kinda - John in Mich 20:47:11 03/06/10 (0)

• Remove Drag Links on 2N [+] (pic) - JerryR 16:17:07 03/06/10 (3)
  • Re: Remove Drag Links on 2N (url) - Stevo 16:26:03 03/06/10 (2)
    • Re: Remove Drag Links on 2N - Chris(TN) 18:49:43 03/07/10 (0)
    • Re: Remove Drag Links on 2N - RichardNY9N 17:24:37 03/06/10 (0)

• Factory rebuilt distributor from CA [+] - Paladin (Bob In PA) 11:17:41 03/06/10 (7)
  • Re: Factory rebuilt distributor from CA - heybusdriver 00:52:48 03/08/10 (0)
  • Re: Factory rebuilt distributor from CA - awhtx 14:36:38 03/06/10 (1)
    • Easy answer - Paladin(Bob In PA) 16:53:49 03/06/10 (0)
  • Re: Factory rebuilt distributor from CA - Bruce (VA) 13:11:37 03/06/10 (0)
  • Re: Factory rebuilt distributor from CA - JMOR 12:15:34 03/06/10 (2)
    • Re: Factory rebuilt distributor from CA - Stevo 12:25:26 03/06/10 (1)
      • Re: Factory rebuilt distributor from CA - Bruce (VA) 13:15:43 03/06/10 (0)

• 8N Throttle Repair [+] - LarryD(VA) 10:24:21 03/06/10 (2)
  • Re: 8N Throttle Repair (url) - Bruce (VA) 11:34:37 03/06/10 (1)
    • Re: 8N Throttle Repair - LarryD(VA) 11:40:03 03/06/10 (0)

• Battery Chargers: Your Oppinions? [+] - Chris(TN) 09:20:18 03/06/10 (6)
  • Re: Battery Chargers: Your Oppinions? - Dave H 08:54:58 03/07/10 (0)
  • Re: Battery Chargers: Your Oppinions? - mark b. williams 07:16:25 03/07/10 (1)
    • Re: Battery Chargers: Your Oppinions? - Chris(TN) 07:06:48 03/08/10 (0)
  • Re: Battery Chargers: Your Oppinions? - Farmer Dan 16:41:06 03/06/10 (0)
  • Re: Battery Chargers: Your Oppinions? - Stevo 13:13:21 03/06/10 (0)
  • Re: Battery Chargers: Your Oppinions? - Ed Gooding (VA) 10:04:25 03/06/10 (0)

• New in Manuals-KR Wilson Service Tools for the Ford Tractor [+] - Ed Gooding (VA) 09:15:57 03/06/10 (3)
  • Re: New in Manuals-KR Wilson Service Tools for the Ford Tractor - Rick WY 00:35:58 03/07/10 (0)
  • Re: New in Manuals-KR Wilson Service Tools for the Ford Tractor - Kevin(FL) 11:07:33 03/06/10 (1)
    • Re: New in Manuals-KR Wilson Service Tools for the Ford Tractor - Doug Siperly 09:35:30 03/07/10 (0)

• Woods L59 [+] - Stev e 08:57:54 03/06/10 (2)
  • Re: Woods L59 - John (TR) 10:57:00 03/06/10 (0)
  • Re: Woods L59 - Paladin (Bob In PA) 10:48:36 03/06/10 (0)

• Chinesse transmission bearings [+] - Josh Cronk 08:28:33 03/06/10 (3)
  • Re: Chinesse transmission bearings - John (TR) 10:56:24 03/06/10 (0)
  • Re: Chinesse transmission bearings - Josh Cronk 08:58:38 03/06/10 (0)
  • Re: Chinesse transmission bearings - TheOldHokie 08:43:56 03/06/10 (0)

• Neat old box [+] (pic) - John (TR) 07:03:54 03/06/10 (3)
  • Re: Neat old box - Ed Gooding (VA) 12:42:18 03/06/10 (1)
    • Re: Neat old box - heybusdriver 01:38:23 03/08/10 (0)
  • Re: Neat old box - Steve-N-TN 08:19:35 03/06/10 (0)

• Brand New Jubilee! [+] - Don Doan 22:00:44 03/05/10 (16)
  • Re: Brand New Jubilee! - Paul in MN 16:09:34 03/06/10 (3)
    • Color correction??? - Paladin (Bob In PA) 17:08:25 03/06/10 (0)
    • Re: Brand New Jubilee! - Don Doan 16:36:02 03/06/10 (1)
      • Re: Brand New Jubilee! - Paul in MN 18:37:13 03/06/10 (0)
  • Re: Brand New Jubilee! - StanNMi 15:24:01 03/06/10 (0)
  • Re: Brand New Jubilee! (url) - Grand Valley Tractor 13:01:23 03/06/10 (1)
    • Re: Brand New Jubilee! - Don Doan 13:35:44 03/06/10 (0)
  • Re: Brand New Jubilee! - heybusdriver 01:45:43 03/06/10 (1)
    • Re: Brand New Jubilee! - Don Doan 12:15:14 03/06/10 (0)
  • Re: Brand New Jubilee! - Don in Luther 00:33:23 03/06/10 (1)
    • Re: Brand New Jubilee! - Don Doan 12:12:32 03/06/10 (0)
  • Re: Brand New Jubilee! - awhtx 22:27:30 03/05/10 (4)
    • Re: Brand New Jubilee! - Don Doan 12:09:15 03/06/10 (3)
      • Re: Brand New Jubilee! - Walt/Tx 18:30:56 03/08/10 (0)
      • Re: Brand New Jubilee! - awhtx 14:40:21 03/06/10 (1)
        • Re: Brand New Jubilee! - Larry (TX)_ 20:58:59 03/06/10 (0)

• new toy [+] (url) - soundguy 20:11:53 03/05/10 (20)
  • Re: new toy - StanNMi 15:37:54 03/06/10 (1)
    • Re: new toy - soundguy 16:45:40 03/06/10 (0)
  • Re: new toy - Grand Valley Tractor 13:05:15 03/06/10 (3)
    • Re: new toy - soundguy 13:38:04 03/06/10 (0)
    • Re: new toy (url) - Bruce (VA) 13:21:56 03/06/10 (1)
      • Re: new toy - Grand Valley Tractor 14:50:33 03/06/10 (0)
  • Re: new toy - Dollar Bill 05:53:13 03/06/10 (1)
    • Re: new toy - soundguy 11:59:55 03/06/10 (0)
  • Re: new toy - Bruce (VA) 22:17:56 03/05/10 (1)
    • Re: new toy - soundguy 11:35:14 03/06/10 (0)
  • Re: new toy - jon 21:46:20 03/05/10 (5)
    • Re: new toy - soundguy 22:09:53 03/05/10 (4)
      • Re: new toy - WayneIA 11:49:44 03/06/10 (3)
        • Re: new toy - soundguy 12:11:01 03/06/10 (2)
          • Re: new toy - Jim.UT 23:00:39 03/06/10 (1)
            • Re: new toy - soundguy 10:48:13 03/07/10 (0)
  • Re: new toy - Farmer Dan 20:38:24 03/05/10 (3)
    • Re: new toy - soundguy 21:11:09 03/05/10 (2)
      • Re: new toy - Farmer Dan 21:16:39 03/05/10 (1)
        • Re: new toy - soundguy 21:19:41 03/05/10 (0)

• jubilee lift arms still refuse to come up [+] - Ed Ridgeway CO 17:48:14 03/05/10 (12)
  • Re: jubilee lift arms still refuse to come up - soundguy 21:13:02 03/05/10 (10)
    • Re: jubilee lift arms still refuse to come up - Ed Ridgeway 21:31:37 03/05/10 (9)
      • Re: jubilee lift arms still refuse to come up - soundguy 22:05:12 03/05/10 (8)
        • Re: jubilee lift arms still refuse to come up - Ed Ridgeway 12:37:38 03/06/10 (7)
          • Re: jubilee lift arms still refuse to come up - soundguy 13:32:13 03/06/10 (5)
            • Re: jubilee lift arms still refuse to come up - Ed Ridgeway 14:36:34 03/06/10 (4)
              • Re: jubilee lift arms still refuse to come up - soundguy 14:50:00 03/06/10 (3)
                • Re: jubilee lift arms still refuse to come up - Ed Ridgeway CO 15:49:48 03/06/10 (1)
                  • Re: jubilee lift arms still refuse to come up - soundguy 16:49:47 03/06/10 (0)
                • Re: jubilee lift arms still refuse to come up - Ed Ridgeway CO 15:10:00 03/06/10 (0)
          • Re: jubilee lift arms still refuse to come up - Ed Ridgeway 13:00:07 03/06/10 (0)
  • Re: jubilee lift arms still refuse to come up - Stumpy(NH) 18:42:01 03/05/10 (0)

• Steering box [+] - Brad M. 16:08:39 03/05/10 (2)
  • Re: Steering box - jon 21:41:45 03/05/10 (0)
  • Re: Steering box (url) (pic) - Bruce (VA) 17:46:03 03/05/10 (0)

• Am i on the right track? [+] - NHP 12:57:54 03/05/10 (4)
  • Re: Am i on the right track? - HCooke 13:34:08 03/05/10 (0)
  • Re: Am i on the right track? - JMOR 13:17:03 03/05/10 (1)
    • Re: Am i on the right track? - NHP 18:36:21 03/05/10 (0)
  • Re: Am i on the right track? - John (TR) 13:00:16 03/05/10 (0)

• Anybody in upstate NY need an anvil? [+] (url) - Paladin (Bob In PA) 11:47:57 03/05/10 (6)
  • Re: Anybody in upstate NY need an anvil? - Farmer Dan 20:49:15 03/05/10 (0)
  • Re: Anybody in upstate NY need an anvil? - Doug 14:49:54 03/05/10 (0)
  • Re: Anybody in upstate NY need an anvil? - Kevin(FL) 13:43:07 03/05/10 (3)
    • Re: Anybody in upstate NY need an anvil? (url) - JMOR 15:34:50 03/05/10 (2)
      • Re: Anybody in upstate NY need an anvil? - John (TR) 19:54:37 03/05/10 (0)
      • Re: Anybody in upstate NY need an anvil? (url) - Stevo 16:06:53 03/05/10 (0)

• Mounting the ARPS - Problem [+] (pic) - Joe in MI 10:46:49 03/05/10 (11)
  • Tie Rods - StormCloud601 08:55:45 03/07/10 (0)
  • Re: Mounting the ARPS - Problem - StanNMi 20:47:58 03/05/10 (0)
  • Re: Mounting the ARPS - Problem - Kevin K(Meramec8N) 19:38:59 03/05/10 (0)
  • Re: Mounting the ARPS - Problem - Kurt-NEPA 13:29:10 03/05/10 (0)
  • Re: Mounting the ARPS - Problem - JMOR 11:32:49 03/05/10 (0)
  • Re: Mounting the ARPS - Problem - Mal(Pa) 11:24:48 03/05/10 (0)
  • Re: Mounting the ARPS - Problem - Mal(Pa) 11:13:39 03/05/10 (4)
    • Re: Mounting the ARPS - Problem - Joe in MI 11:48:33 03/05/10 (3)
      • Re: Mounting the ARPS - Problem - Don in Luther 01:00:50 03/06/10 (1)
        • Re: Mounting the ARPS - Problem - Don in Luther 01:35:47 03/06/10 (0)
      • Re: Mounting the ARPS - Problem (pic) - JMOR 12:00:00 03/05/10 (0)

• Magneteo bracket price reduced [+] - TheOldHokie 08:45:32 03/05/10 (1)
  • Re: Magneteo bracket price reduced - Stumpy(NH) 18:24:47 03/05/10 (0)

• 2N Generator service [+] - Keith 44' 2N 22:58:18 03/04/10 (1)
  • Re: 2N Generator service - Dan 07:51:17 03/05/10 (0)

• Standard Bearing [+] (url) - John (TR) 18:58:06 03/04/10 (5)
  • Re: Standard Bearing - Paladin (bob In PA) 09:10:12 03/05/10 (2)
    • Re: Standard Bearing - John (TR) 09:47:01 03/05/10 (0)
    • Re: Standard Bearing - TheOldHokie 09:34:50 03/05/10 (0)
  • Re: Standard Bearing - Dan 07:44:40 03/05/10 (0)
  • Re: Standard Bearing - Charles (N.C.) 20:39:22 03/04/10 (0)

• How Fast Is Fast? [+] - Cjharles (N.C.) 18:32:53 03/04/10 (3)
  • Re: How Fast Is Fast? - Tom from Mi. 08:21:37 03/05/10 (0)
  • Re: How Fast Is Fast? - John (TR) 21:30:48 03/04/10 (0)
  • Re: How Fast Is Fast? - Sammy 21:10:44 03/04/10 (0)

• spark plugs [+] - FEARNOdeere 18:20:23 03/04/10 (1)
  • Re: spark plugs - HCooke 21:28:19 03/04/10 (0)

• 8n starts and runs for a min. then bogs and wont start again [+] - Noel 11:12:55 03/04/10 (7)
  • Re: 8n starts and runs for a min. then bogs and wont start a - Rockbiter 22:54:28 03/04/10 (0)
  • Re: 8n starts and runs for a min. then bogs and wont start again - LeeNJ 15:29:23 03/04/10 (1)
    • Re: 8n starts and runs for a min. then bogs and wont start again - soundguy 17:39:02 03/04/10 (0)
  • Re: 8n starts and runs for a min. then bogs and wont start again (pic) - Ed Gooding (VA) 14:15:43 03/04/10 (1)
    • Re: 8n starts and runs for a min. then bogs and wont start again - R Geiger 10:42:26 03/05/10 (0)
  • Re: 8n starts and runs for a min. then bogs and wont start again - soundguy 12:03:02 03/04/10 (1)
    • Re: 8n starts and runs for a min. then bogs and wont start again - Noel 10:52:30 03/08/10 (0)

• Front Mount Distributors [+] - don b 09:34:06 03/04/10 (2)
  • Re: Front Mount Distributors - Paladin (Bob In PA) 21:22:52 03/04/10 (1)
    • Re: Front Mount Distributors - don b 11:19:49 03/05/10 (0)

• More Repairs On Emily 52'8N (with photos) [+] - Kevin(FL) 07:54:15 03/04/10 (13)
  • Re: More Repairs On Emily 52'8N (with photos) - John (TR) 19:00:04 03/04/10 (1)
    • Re: More Repairs On Emily 52'8N (with photos) - Kevin(FL) 13:31:47 03/05/10 (0)
  • Re: More Repairs On Emily 52'8N (with photos) - Randy(PA) 18:38:35 03/04/10 (1)
    • Re: More Repairs On Emily 52'8N (with photos) - Kevin(FL) 13:09:46 03/05/10 (0)
  • Re: More Repairs On Emily 52'8N (with photos) - Dave Smith 14:58:41 03/04/10 (1)
    • Re: More Repairs On Emily 52'8N (with photos) - Kevin(FL) 13:12:54 03/05/10 (0)
  • Re: More Repairs On Emily 52'8N (with photos) - soundguy 10:33:28 03/04/10 (2)
    • Re: More Repairs On Emily 52'8N (with photos) - Kevin(FL) 13:34:56 03/05/10 (1)
      • Re: More Repairs On Emily 52'8N (with photos) - soundguy 20:07:51 03/05/10 (0)
  • Re: More Repairs On Emily 52'8N (with photos) - Hardacrefarm 08:49:27 03/04/10 (1)
    • Re: More Repairs On Emily 52'8N (with photos) - Kevin(FL) 13:24:46 03/05/10 (0)
  • Re: More Repairs On Emily 52'8N (with photos) - john, carmel, ny 08:15:28 03/04/10 (1)
    • Re: More Repairs On Emily 52'8N (with photos) - Kevin(FL) 08:35:06 03/04/10 (0)

• Valve Guide Seals/49 8N [+] - Tommy Russell 06:38:53 03/04/10 (4)
  • Re: Valve Guide Seals/49 8N - Muchbroker 15:59:25 03/04/10 (0)
  • Re: Valve Guide Seals/49 8N - Dean 07:50:53 03/04/10 (0)
  • Re: Valve Guide Seals/49 8N - Farmer Dan 07:44:20 03/04/10 (0)
  • Re: Valve Guide Seals/49 8N - John Murphy 07:09:41 03/04/10 (0)

• Todays Progress [+] - Hardacrefarm 01:41:43 03/04/10 (0)

• 9n detent balls and springs [+] - Josh Cronk 21:26:17 03/03/10 (2)
  • Re: 9n detent balls and springs - Charles (N.C.) 21:35:16 03/03/10 (1)
    • Re: 9n detent balls and springs - Josh Cronk 21:07:39 03/05/10 (0)

• Holy magneto Batman!! - it's the Mother Lode!!! [+] - TheOldHokie 18:19:43 03/03/10 (5)
  • Re: Holy magneto Batman!! - it's the Mother Lode!!! - StanNMi 18:57:42 03/05/10 (0)
  • now for the pulley - wayne N Ind. 21:37:29 03/04/10 (1)
    • Sure - how many do you want? - TheOldHokie 08:36:28 03/05/10 (0)
  • Re: Holy magneto Batman!! - it's the Mother Lode!!! - Jerry Marks 19:12:21 03/04/10 (0)
  • Re: Holy magneto Batman!! - it's the Mother Lode!!! - Stumpy(NH) 06:29:10 03/04/10 (0)

• Mounting the ARPS Dozer / snowplow [+] - Joe in MI 17:08:46 03/03/10 (5)
  • Re: Mounting the ARPS Dozer / snowplow - Ed Gooding (VA) 22:38:03 03/03/10 (0)
  • Re: Mounting the ARPS Dozer / snowplow - John (TR) 17:56:04 03/03/10 (2)
    • Re: Mounting the ARPS Dozer / snowplow - Joe in MI 18:49:54 03/04/10 (1)
      • Re: Mounting the ARPS Dozer / snowplow - Jonas Hastings 19:18:00 03/04/10 (0)
  • Re: Mounting the ARPS Dozer / snowplow - wwildhorse2k 17:19:31 03/03/10 (0)

• tool for front dist [+] - jforrest 16:18:43 03/03/10 (1)
  • Re: tool for front dist - Farmer Dan 16:59:06 03/03/10 (0)

• Smoked electrical problems corrected [+] - Jimmyjack 13:51:19 03/03/10 (7)
  • Re: Smoked electrical problems corrected - Stevo 15:52:26 03/03/10 (1)
    • Re: Smoked electrical problems corrected - Jimmyjack 19:11:57 03/03/10 (0)
  • Re: Smoked electrical problems corrected - JMOR 15:04:55 03/03/10 (4)
    • Re: Smoked electrical problems corrected - Jimmyjack 19:20:11 03/03/10 (3)
      • Re: Smoked electrical problems corrected - JMOR 20:27:12 03/03/10 (2)
        • Re: Smoked electrical problems corrected - JMOR 20:31:14 03/03/10 (1)
          • Re: Smoked electrical problems corrected - Jack - Iowa 23:24:30 03/03/10 (0)

• Opinion's Please [+] - Hardacrefarm 13:30:20 03/03/10 (7)
  • Re: Opinion's Please - StanNMi 19:29:29 03/05/10 (1)
    • Re: Opinion's Please - Hardacrefarm 11:48:15 03/06/10 (0)
  • Re: Opinion's Please - Rockbiter 23:50:08 03/03/10 (4)
    • Re: Opinion's Please - Hardacrefarm 01:12:11 03/04/10 (3)
      • Re: Opinion's Please (url) - Kevin Singleton 14:34:34 03/04/10 (2)
        • Re: Opinion's Please - Hardacrefarm 01:13:01 03/05/10 (1)
          • Re: Opinion's Please (url) - Kevin Singleton 08:10:52 03/05/10 (0)

• Right Fan Belt [+] - NHP 13:27:25 03/03/10 (4)
  • Re: Right Fan Belt - nhp 17:07:08 03/03/10 (0)
  • Re: Right Fan Belt - don b 16:40:51 03/03/10 (0)
  • Re: Right Fan Belt - Gaspump 16:33:27 03/03/10 (0)
  • Re: Right Fan Belt (url) - Bruce (VA) 16:15:20 03/03/10 (0)

• 2N/9N Hydraulics/ Loader [+] - John 12:29:46 03/03/10 (5)
  • Re: 2N/9N Hydraulics/ Loader - TheOldHokie 17:14:19 03/03/10 (4)
    • Re: 2N/9N Hydraulics/ Loader - John 19:04:05 03/03/10 (3)
      • Re: 2N/9N Hydraulics/ Loader - TheOldHokie 20:03:25 03/03/10 (2)
        • Re: 2N/9N Hydraulics/ Loader - John 20:33:10 03/03/10 (1)
          • Re: 2N/9N Hydraulics/ Loader - TheOldHokie 21:14:03 03/03/10 (0)

• Ford 2000 Industrial [+] - farmerbrain 12:10:33 03/03/10 (23)
  • Re: Ford 2000 Industrial (pic) - Kirk-NJ 05:13:34 03/04/10 (0)
  • Re: Ford 2000 Industrial (url) - Stevo 16:58:16 03/03/10 (5)
    • Re: Ford 2000 Industrial - Don Doan 18:06:33 03/03/10 (4)
      • Re: Ford 2000 Industrial - Ed Gooding (VA) 00:09:24 03/04/10 (2)
        • Re: Ford 2000 Industrial - Don Doan 12:06:31 03/04/10 (1)
          • Re: Ford 2000 Industrial - Ed Gooding (VA) 09:23:33 03/05/10 (0)
      • Re: Ford 2000 Industrial (url) - Stevo 18:28:42 03/03/10 (0)
  • Re: Ford 2000 Industrial (url) - Mike N MI 16:14:04 03/03/10 (0)
  • Re: Ford 2000 Industrial (url) - Stevo 14:12:28 03/03/10 (0)
  • Re: Ford 2000 Industrial - Paladin (Bob In PA) 14:05:49 03/03/10 (0)
  • Re: Ford 2000 Industrial (url) - Dean 13:44:20 03/03/10 (10)
    • Re: Ford 2000 Industrial (url) - Dean 13:46:08 03/03/10 (9)
      • Re: Ford 2000 Industrial - farmerbrain 14:40:34 03/03/10 (8)
        • Re: Ford 2000 Industrial - Ed Gooding (VA) 16:53:58 03/03/10 (0)
        • Re: Ford 2000 Industrial - Dean 14:45:39 03/03/10 (6)
          • Re: Ford 2000 Industrial - farmerbrain 15:08:19 03/03/10 (5)
            • Re: Ford 2000 Industrial - Dean 15:12:56 03/03/10 (4)
              • Re: Ford 2000 Industrial - farmerbrain 15:34:37 03/03/10 (3)
                • Re: Ford 2000 Industrial - Dean 15:43:13 03/03/10 (2)
                  • Re: Ford 2000 Industrial - farmerbrain 15:45:28 03/03/10 (1)
                    • Re: Ford 2000 Industrial - Dean 15:57:21 03/03/10 (0)
  • Re: Ford 2000 Industrial - Dean 13:20:54 03/03/10 (1)
    • Re: Ford 2000 Industrial - Dean 13:24:05 03/03/10 (0)

• 8N's can be so good [+] - Mel, NJ 10:45:28 03/03/10 (1)
  • Re: 8N's can be so good - Charles (N.C.) 13:01:20 03/03/10 (0)

• New in Manuals library - 1948 8N Dealer Brochure [+] - Ed Gooding (VA) 10:26:44 03/03/10 (1)
  • Re: New in Manuals library - 1948 8N Dealer Brochure - Kevin(FL) 12:50:46 03/03/10 (0)

• Painting Subject,,,Again [+] - Charles (N.C.) 08:52:54 03/03/10 (8)
  • Re: Painting Subject,,,Again - SWMO 13:03:14 03/03/10 (0)
  • Re: Painting Subject,,,Again - Gaspump 12:12:53 03/03/10 (0)
  • Re: Painting Subject,,,Again - Paladin (Bob In PA) 10:39:24 03/03/10 (0)
  • Re: Painting Subject,,,Again - soundguy 10:25:29 03/03/10 (4)
    • Re: Painting Subject,,,Again - Charles (N.C.) 18:02:15 03/03/10 (2)
      • Re: Painting Subject,,,Again - soundguy 10:29:37 03/04/10 (0)
      • Re: Painting Subject,,,Again - John (TR) 20:14:31 03/03/10 (0)
    • Re: Painting Subject,,,Again - Greybeard - PA 11:26:38 03/03/10 (0)

• CD going out in today's mail [+] - NTC Administrators 08:17:17 03/03/10 (0)

• 1953 Ford Jubilee Issues [+] - Dreese81 21:33:28 03/02/10 (13)
  • Re: 1953 Ford Jubilee Issues - 36 coupe 16:47:03 03/05/10 (0)
  • Re: 1953 Ford Jubilee Issues - StanNMi 08:41:35 03/05/10 (0)
  • Re: 1953 Ford Jubilee Issues (url) - Stevo 12:42:36 03/03/10 (1)
    • Re: 1953 Ford Jubilee Issues - Dannis 07:36:54 03/04/10 (0)
  • Re: 1953 Ford Jubilee Issues - soundguy 10:43:36 03/03/10 (2)
    • Re: 1953 Ford Jubilee Issues - Dannis 07:36:03 03/04/10 (1)
      • Re: 1953 Ford Jubilee Issues - soundguy 10:31:33 03/04/10 (0)
  • Re: 1953 Ford Jubilee Issues (url) - Grand Valley Tractor 08:48:11 03/03/10 (1)
    • Re: 1953 Ford Jubilee Issues - Dannis 07:32:19 03/04/10 (0)
  • Re: 1953 Ford Jubilee Issues - Ken-Pa 21:51:58 03/02/10 (1)
    • Re: 1953 Ford Jubilee Issues - Dannis 07:31:48 03/04/10 (0)
  • Re: 1953 Ford Jubilee Issues - Jim.UT 21:49:40 03/02/10 (1)
    • Re: 1953 Ford Jubilee Issues - Dannis 07:31:11 03/04/10 (0)

• Good Evening on Flea Bay [+] - Paladin (Bob In PA) 21:01:35 03/02/10 (9)
  • Re: Good Evening on Flea Bay - John (TR) 21:32:16 03/02/10 (3)
    • Re: Good Evening on Flea Bay - Paladin (Bob In PA) 21:37:46 03/02/10 (2)
      • Re: Good Evening on Flea Bay - Jim.UT 21:52:35 03/02/10 (1)
        • Re: Good Evening on Flea Bay - Paladin (Bob In PA) 10:32:47 03/03/10 (0)
  • Re: Good Evening on Flea Bay - Charles (N.C.) 21:09:54 03/02/10 (4)
    • Re: Good Evening on Flea Bay - Ken(Ark) 21:17:40 03/02/10 (3)
      • Re: Good Evening on Flea Bay - John (TR) 21:25:59 03/02/10 (2)
        • Re: Good Evening on Flea Bay - Kevin(FL) 13:09:24 03/03/10 (0)
        • Re: Good Evening on Flea Bay - Kirk-NJ 05:10:08 03/03/10 (0)

• Need advice on Sherman Step Up [+] - John (TR) 20:49:45 03/02/10 (6)
  • Re: Need advice on Sherman Step Up - Jonas Hastings 16:36:24 03/03/10 (2)
    • Re: Need advice on Sherman Step Up - John (TR) 23:39:39 03/03/10 (1)
      • Re: Need advice on Sherman Step Up - Jonas Hastings 16:20:13 03/04/10 (0)
  • Re: Need advice on Sherman Step Up - Dollar Bill 06:50:27 03/03/10 (0)
  • Re: Need advice on Sherman Step Up - Paladin (Bob In PA) 21:11:23 03/02/10 (1)
    • Re: Need advice on Sherman Step Up - John (TR) 21:23:24 03/02/10 (0)

• Hyd lifters [+] - Spuds-IL 17:56:22 03/02/10 (2)
  • Re: Hyd lifters - JMOR 19:27:00 03/02/10 (1)
    • Re: Hyd lifters - Spuds-IL 20:01:20 03/02/10 (0)

• 9n transmission question [+] - John (TR) 16:17:59 03/02/10 (1)
  • Likely answer - John (TR) 20:33:51 03/02/10 (0)

• my 8n and bush hog [+] - j.r. neal 15:24:40 03/02/10 (4)
  • Re: my 8n and bush hog - soundguy 16:36:02 03/02/10 (0)
  • Re: my 8n and bush hog (url) - HCooke 16:10:20 03/02/10 (0)
  • Re: my 8n and bush hog - Charles (N.C.) 16:08:35 03/02/10 (1)
    • Re: my 8n and bush hog - AL (IN) 17:01:43 03/02/10 (0)

• How-To help [+] - John Murphy 07:50:53 03/02/10 (2)
  • Re: How-To help - Ed Gooding (VA) 07:53:52 03/02/10 (1)
    • Re: How-To help - John Murphy 09:25:09 03/02/10 (0)

• removing radius arm pins [+] - heybusdriver 22:40:23 03/01/10 (12)
  • Re: removing radius arm pins - heybusdriver 01:51:20 03/03/10 (0)
  • Re: removing radius arm pins - Carl Bacon 01:21:37 03/03/10 (0)
  • Re: removing radius arm pins - Steve (BC) 23:22:46 03/02/10 (0)
  • Re: removing radius arm pins - Jim.UT 21:55:16 03/02/10 (0)
  • Re: removing radius arm pins - Sammy 17:15:25 03/02/10 (0)
  • Re: removing radius arm pins - Dollar Bill 13:59:41 03/02/10 (0)
  • Re: removing radius arm pins - Mark B. Williams 11:31:49 03/02/10 (0)
  • Re: removing radius arm pins - soundguy 10:35:59 03/02/10 (0)
  • Re: removing radius arm pins - Kirk-NJ 05:32:10 03/02/10 (1)
    • Re: removing radius arm pins - Joe Ferguson 10:13:55 03/02/10 (0)
  • Re: removing radius arm pins - Kirk-NJ 05:16:30 03/02/10 (1)
    • Re: removing radius arm pins - Don in Luther 01:53:56 03/06/10 (0)

• books [+] - Doug 18:38:14 03/01/10 (7)
  • Re: books - StanNMi 22:22:17 03/02/10 (0)
  • Re: books - jon 09:27:48 03/02/10 (1)
    • Re: books - Tim Daley(MI) 11:09:43 03/02/10 (0)
  • Re: books - Ed Gooding (VA) 08:15:53 03/02/10 (0)
  • Re: books - Don In France 04:11:56 03/02/10 (0)
  • Re: books - soundguy 21:12:21 03/01/10 (0)
  • Re: books - Tim Daley(MI) 20:18:38 03/01/10 (0)

• Smooth axles and 32" rims [+] - HCooke 18:03:32 03/01/10 (0)

• Got a thank you card from Becky [+] - Dave Smith 17:49:08 03/01/10 (0)

• 8N compression test [+] - Carl Bacon 16:33:46 03/01/10 (3)
  • Re: 8N compression test - Charles (N.C.) 16:48:23 03/01/10 (2)
    • Re: 8N compression test - Carl Bacon 16:59:52 03/01/10 (1)
      • Re: 8N compression test - Charles (N.C.) 20:33:54 03/01/10 (0)

• new sparex fender [+] - Mike Browne 15:06:44 03/01/10 (4)
  • Re: new sparex fender - don b 09:42:50 03/02/10 (0)
  • Re: new sparex fender - soundguy 21:14:20 03/01/10 (0)
  • Re: new sparex fender (url) - Grand Valley Tractor 15:30:52 03/01/10 (0)
  • Re: new sparex fender - HCooke 15:26:29 03/01/10 (0)

• ford 2000 industrial [+] - farmerbrain 13:26:11 03/01/10 (11)
  • Re: ford 2000 industrial - Ed Gooding (VA) 08:02:15 03/02/10 (0)
  • Re: ford 2000 industrial - Kirk-NJ 20:21:36 03/01/10 (0)
  • Re: ford 2000 industrial - soundguy 14:06:08 03/01/10 (6)
    • Re: ford 2000 industrial - farmerbrain 14:29:53 03/01/10 (5)
      • Re: ford 2000 industrial - Dean 15:12:16 03/01/10 (3)
        • Re: ford 2000 industrial - farmerbrain 16:20:13 03/01/10 (2)
          • Re: ford 2000 industrial - Ed Gooding (VA) 07:46:40 03/02/10 (0)
          • Re: ford 2000 industrial - Dean 20:06:10 03/01/10 (0)
      • Re: ford 2000 industrial - soundguy 14:35:06 03/01/10 (0)
  • Re: ford 2000 industrial - JMOR 14:02:31 03/01/10 (0)
  • Re: ford 2000 industrial - TheOldHokie 13:48:16 03/01/10 (0)

• Electrical smoke problem Saga continues [+] - Jimmyjack 13:10:52 03/01/10 (13)
  • Re: Electrical smoke problem Saga continues - soundguy 14:14:40 03/01/10 (3)
    • Re: Electrical smoke problem Saga continues - Jimmyjack 15:40:08 03/01/10 (2)
      • Re: Electrical smoke problem Saga continues - soundguy 17:25:48 03/01/10 (1)
        • Re: Electrical smoke problem Saga continues - 36 coupe 07:22:20 03/02/10 (0)
  • Re: Electrical smoke problem Saga continues - Stevo 14:01:32 03/01/10 (2)
    • Re: Electrical smoke problem Saga continues - Jimmyjack 15:43:25 03/01/10 (1)
      • Re: Electrical smoke problem Saga continues - 36 coupe 07:30:33 03/02/10 (0)
  • Re: Electrical smoke problem Saga continues - JMOR 13:54:16 03/01/10 (5)
    • Re: Electrical smoke problem Saga continues - Jimmyjack 15:35:11 03/01/10 (4)
      • Re: Electrical smoke problem Saga continues - JMOR 17:07:09 03/01/10 (3)
        • Re: Electrical smoke problem Saga continues - Jimmyjack 18:59:28 03/01/10 (2)
          • Re: Electrical smoke problem Saga continues - Jimmyjack 19:04:51 03/01/10 (1)
            • Re: Electrical smoke problem Saga continues (url) - JMOR 20:10:48 03/01/10 (0)

• Brake Shoe Springs.....how the *****? [+] - Derrick 12:46:50 03/01/10 (12)
  • Re: Brake Shoe Springs.....how the *****? - Derrick 17:46:36 03/01/10 (0)
  • Re: Brake Shoe Springs.....how the *****? (url) (pic) - Bruce (VA) 17:31:12 03/01/10 (4)
    • Re: Brake Shoe Springs.....how the *****? - Brett Jones 21:10:36 03/01/10 (3)
      • Re: Brake Shoe Springs.....how the *****? - Bruce (VA) 21:36:43 03/01/10 (2)
        • Re: Brake Shoe Springs.....how the *****? - Brett Jones 21:49:15 03/01/10 (1)
          • Re: Brake Shoe Springs.....how the *****? - Bruce (VA) 22:56:31 03/01/10 (0)
  • Re: Brake Shoe Springs.....how the *****? - Gaspump 14:56:19 03/01/10 (0)
  • Re: Brake Shoe Springs.....how the *****? - Grand Valley Tractor 14:14:28 03/01/10 (0)
  • Re: Brake Shoe Springs.....how the *****? - TheOldHokie 13:38:01 03/01/10 (0)
  • Re: Brake Shoe Springs.....how the *****? - Derrick 13:03:47 03/01/10 (1)
    • Re: Brake Shoe Springs.....how the *****? - Dean 13:07:27 03/01/10 (0)
  • Re: Brake Shoe Springs.....how the *****? (url) - Bruce (VA) 12:59:48 03/01/10 (0)

• Need help-stuck in gear [+] - Brian-2N 11:57:54 03/01/10 (3)
  • Re: Need help-stuck in gear - waterman 20:50:35 03/01/10 (0)
  • Re: Need help-stuck in gear - Sammy 12:26:34 03/01/10 (1)
    • Re: Need help-stuck in gear - Brian-2N 12:48:11 03/01/10 (0)

• ME IN TRACTOR CRUISE LAST NOV. [+] (pic) - ZANE 11:26:24 03/01/10 (5)
  • Re: ME IN TRACTOR CRUISE LAST NOV. - Russ SoCal 23:14:49 03/01/10 (0)
  • Re: ME IN TRACTOR CRUISE LAST NOV. - Charles (N.C.) 16:41:11 03/01/10 (0)
  • Re: ME IN TRACTOR CRUISE LAST NOV. - Jimmyjack 13:14:22 03/01/10 (0)
  • Re: ME IN TRACTOR CRUISE LAST NOV. (url) - Kevin Singleton 12:18:01 03/01/10 (1)
    • Re: ME IN TRACTOR CRUISE LAST NOV. - Galen 14:39:22 03/02/10 (0)

• Oil pump rebuild/49 8N [+] - Tommy Russell 10:55:12 03/01/10 (5)
  • Re: Oil pump rebuild/49 8N (url) - Grand Valley Tractor 11:04:48 03/01/10 (4)
    • Re: Oil pump rebuild/49 8N - Tommy Russell 12:05:05 03/01/10 (3)
      • Re: Oil pump rebuild/49 8N - TheOldHokie 13:57:08 03/01/10 (2)
        • Re: Oil pump rebuild/49 8N - John (TR) 13:41:46 03/02/10 (0)
        • Re: Oil pump rebuild/49 8N - Tommy Russell 21:39:32 03/01/10 (0)

• freeze plugs/49 8N aka welsh plugs & casting plugs [+] - Tommy Russell 10:51:10 03/01/10 (6)
  • Re: freeze plugs/49 8N aka welsh plugs & casting plugs - Dollar Bill 15:16:27 03/01/10 (5)
    • Re: freeze plugs/49 8N aka welsh plugs & casting plugs - Tommy Russell 21:35:08 03/01/10 (4)
      • Re: freeze plugs/49 8N aka welsh plugs & casting plugs - Dollar Bill 06:15:23 03/02/10 (3)
        • Re: freeze plugs/49 8N aka welsh plugs & casting plugs - Tommy Russell 10:23:06 03/02/10 (2)
          • Re: freeze plugs/49 8N aka welsh plugs & casting plugs - Dollar Bill 11:26:05 03/02/10 (1)
            • Re: freeze plugs/49 8N aka welsh plugs & casting plugs - Tommy Russell 11:06:28 03/03/10 (0)

• Bought an F&T [+] - Paladin (Bob In PA) 10:09:55 03/01/10 (0)

• Fuel tank with sending unit hole? [+] - Tim 09:45:32 03/01/10 (2)
  • Re: Fuel tank with sending unit hole? - greg 06:57:26 03/02/10 (0)
  • Re: Fuel tank with sending unit hole? - Grand Valley Tractor 11:59:38 03/01/10 (0)

• NOS Aircleaner [+] (url) - jon 08:26:39 03/01/10 (2)
  • Re: NOS Aircleaner - don b 14:01:25 03/03/10 (0)
  • Re: NOS Aircleaner - Gaspump 11:37:06 03/01/10 (0)

• February 2010 Tractor Registry Entries [+] - Tyler (MD) 04:49:13 03/01/10 (1)
  • Congratulations to Louis C.P. Bos - Paladin (Bob In PA) 10:20:40 03/01/10 (0)

• 1950 8N Converson Pics [+] - Jacob Hudson Wa 23:40:10 02/28/10 (16)
  • Re: 1950 8N Converson Pics - StanNMi 19:30:56 03/04/10 (0)
  • Re: 1950 8N Converson Pics - Chris(TN) 21:13:50 03/01/10 (0)
  • Re: 1950 8N Converson Pics - Larry (TX) 15:45:25 03/01/10 (0)
  • Re: 1950 8N Converson Pics - HCooke 12:01:33 03/01/10 (0)
  • Re: 1950 8N Converson Pics (url) - Grand Valley Tractor 10:31:04 03/01/10 (0)
  • Re: 1950 8N Converson Pics - Jimmyjack 10:27:15 03/01/10 (0)
  • Re: 1950 8N Converson Pics - 9N OKIE 10:20:03 03/01/10 (0)
  • Re: 1950 8N Converson Pics - mark b. williams 07:45:47 03/01/10 (0)
  • Re: 1950 8N Converson Pics - Dean 07:44:18 03/01/10 (0)
  • Re: 1950 8N Converson Pics - Dollar Bill 06:54:48 03/01/10 (0)
  • Re: 1950 8N Converson Pics - John (TR) 05:47:36 03/01/10 (0)
  • Placed in wrong spot - Kirk-NJ 05:30:15 03/01/10 (0)
  • Re: 1950 8N Converson Pics - CTI Bob 00:54:29 03/01/10 (0)
  • Re: 1950 8N Converson Pics - Bruce(OR) 23:55:53 02/28/10 (0)
  • Re: 1950 8N Converson Pics - JMOR 23:48:06 02/28/10 (1)
    • Re: 1950 8N Converson Pics - Kirk-NJ 05:22:19 03/01/10 (0)

• 3 PT Carry All Frame [+] - Ky Dave 22:56:38 02/28/10 (2)
  • Re: 3 PT Carry All Frame - Ed Gooding (VA) 08:00:22 03/02/10 (0)
  • Re: 3 PT Carry All Frame - Ken-Pa 13:14:04 03/01/10 (0)

• 9n input shaft [+] - Josh Cronk 22:08:59 02/28/10 (5)
  • Re: 9n input shaft - Josh Cronk 07:01:19 03/01/10 (0)
  • Re: 9n input shaft - Kirk-NJ 05:40:41 03/01/10 (1)
    • Re: 9n input shaft - Jim.UT 23:15:14 03/01/10 (0)
  • Re: 9n input shaft - Paladin (Bob In PA) 22:30:50 02/28/10 (0)
  • Re: 9n input shaft (url) - John (TR) 22:16:34 02/28/10 (0)

• Tool Box ? [+] - SWMO 20:57:35 02/28/10 (4)
  • Re: Tool Box ? (url) - Paladin (Bob In PA) 21:06:57 02/28/10 (0)
  • Re: Tool Box ? - John (TR) 21:03:54 02/28/10 (0)
  • Re: Tool Box ? - Dan 21:02:35 02/28/10 (1)
    • Re: Tool Box ? - SWMO 22:50:00 02/28/10 (0)

• How Straight is Straight [+] - Jeff CT 20:50:55 02/28/10 (3)
  • Re: How Straight is Straight - Dollar Bill 07:12:54 03/01/10 (0)
  • Re: How Straight is Straight - K.LaRue-VA 21:27:22 02/28/10 (0)
  • Re: How Straight is Straight - John (TR) 20:58:34 02/28/10 (0)

• Head Temperature…?? [+] - Stevo 20:35:54 02/28/10 (12)
  • Re: Head Temperature…?? - John Murphy 14:43:59 03/01/10 (1)
    • Re: Head Temperature…?? - Stevo 16:40:19 03/01/10 (0)
  • Re: Head Temperature…?? - charles in Louisiana 09:47:58 03/01/10 (0)
  • Re: Head Temperature…?? - JMOR 23:13:15 02/28/10 (0)
  • Re: Head Temperature…?? - John (TR) 21:06:08 02/28/10 (3)
    • Re: Head Temperature…?? - Stevo 21:14:28 02/28/10 (2)
      • Re: Head Temperature…?? - John (TR) 21:54:36 02/28/10 (1)
        • Re: Head Temperature…?? - Stevo 00:10:24 03/01/10 (0)
  • Re: Head Temperature…?? - Dan 20:52:45 02/28/10 (0)
  • Re: Head Temperature…?? - Farmer Dan 20:41:15 02/28/10 (2)
    • Re: Head Temperature…?? - Stevo 20:43:16 02/28/10 (1)
      • Re: Head Temperature…?? - Stevo 20:50:37 02/28/10 (0)

• Rear Axle Leak [+] - Casey 19:51:13 02/28/10 (4)
  • Re: Rear Axle Leak - Dan 21:00:50 02/28/10 (2)
    • Re: Rear Axle Leak - Casey 19:20:46 03/01/10 (1)
      • Re: Rear Axle Leak - Paladin (Bob In PA) 21:33:06 03/02/10 (0)
  • Re: Rear Axle Leak (url) - John (TR) 20:06:13 02/28/10 (0)

• Turns over but won't start [+] - Chris M. 18:48:09 02/28/10 (4)
  • Re: Turns over but won't start - Paul Schultz 23:19:13 02/28/10 (0)
  • Re: Turns over but won't start - Stevo 21:00:06 02/28/10 (0)
  • Re: Turns over but won't start - Kurt-NEPA 19:41:29 02/28/10 (0)
  • Re: Turns over but won't start (url) - Bruce (VA) 18:55:56 02/28/10 (0)

• Tire Pressure and Road Grading?? [+] - Stevo 18:06:26 02/28/10 (3)
  • Re: Tire Pressure and Road Grading?? - Farmer Dan 19:47:32 02/28/10 (0)
  • Re: Tire Pressure and Road Grading?? - John (TR) 19:20:42 02/28/10 (0)
  • Re: Tire Pressure and Road Grading?? - HCooke 18:11:08 02/28/10 (0)

• Nifty tool [+] - John (TR) 18:05:34 02/28/10 (9)
  • Re: Nifty tool - Ken-Pa 12:09:53 03/01/10 (0)
  • Re: Nifty tool - Dave H 20:54:51 02/28/10 (0)
  • Re: Nifty tool - HCooke 18:08:17 02/28/10 (6)
    • Re: Nifty tool - John (TR) 19:16:46 02/28/10 (5)
      • Re: Nifty tool - Farmer Dan 19:51:25 02/28/10 (4)
        • Re: Nifty tool - Greybeard - PA 20:02:45 02/28/10 (0)
        • Re: Nifty tool - John (TR) 20:01:02 02/28/10 (2)
          • Double ribbers - Paladin (Bob In PA) 20:56:52 02/28/10 (1)
            • Re: Double ribbers - John (TR) 21:11:00 02/28/10 (0)

• Tim and Ed - how about a Funk database? [+] - Paladin (Bob In PA) 11:43:10 02/28/10 (2)
  • Re: Tim and Ed - how about a Funk database? - Ed Gooding (VA) 18:25:50 02/28/10 (1)
    • Re: Tim and Ed - how about a Funk database? - Ken-Pa 12:06:19 03/01/10 (0)

• NOS Parts - Hurry! [+] - Tim Daley(MI) 07:40:38 02/28/10 (12)
  • Woo Hoo - $36.55 for an oil filter!!! - Paladin (Bob In PA) 17:10:49 02/28/10 (5)
    • Re: Woo Hoo - $36.55 for an oil filter!!! - John (TR) 18:06:24 02/28/10 (4)
      • Re: Woo Hoo - $36.55 for an oil filter!!! - Gaspump 18:50:11 02/28/10 (3)
        • Re: Woo Hoo - $36.55 for an oil filter!!! - Tyler (MD) 07:35:41 03/01/10 (2)
          • Re: Woo Hoo - $36.55 for an oil filter!!! - don b 09:47:15 03/01/10 (1)
            • Re: Woo Hoo - $36.55 for an oil filter!!! - don b 09:54:03 03/01/10 (0)
  • Re: NOS Parts - Hurry! - Paladin (Bob In PA) 11:26:01 02/28/10 (0)
  • Re: NOS Parts - Hurry! - Tyler (MD) 09:39:34 02/28/10 (0)
  • Re: NOS Parts - Hurry! - Tim Daley(MI) 08:30:57 02/28/10 (3)
    • Re: NOS Parts - Hurry! - Kurt-NEPA 09:54:17 02/28/10 (0)
    • Re: NOS Parts - Hurry! - Sammy 09:40:42 02/28/10 (1)
      • Re: NOS Parts - Hurry! - Tyler (MD) 09:43:48 02/28/10 (0)

• RATS! Busted gas shut off [+] - Stockdale Dave 21:47:25 02/27/10 (9)
  • Re: RATS! Busted gas shut off - Don In France 04:19:17 02/28/10 (0)
  • Re: RATS! Busted gas shut off - 9N OKIE 00:38:31 02/28/10 (0)
  • Re: RATS! Busted gas shut off (url) - Bruce (VA) 21:57:15 02/27/10 (6)
    • Re: RATS! Busted gas shut off - Jimmyjack 23:32:42 02/27/10 (2)
      • Re: RATS! Busted gas shut off - K.LaRue-VA 01:43:41 02/28/10 (1)
        • Re: RATS! Busted gas shut off - Jimmyjack 18:09:11 02/28/10 (0)
    • Re: RATS! Busted gas shut off - woodworker40 22:40:09 02/27/10 (2)
      • Re: RATS! Busted gas shut off (url) - Bruce (VA) 10:02:46 02/28/10 (0)
      • Re: RATS! Busted gas shut off - John (TR) 22:43:56 02/27/10 (0)

• Stupid Olympics!! [+] (url) - Jim.UT 20:47:58 02/27/10 (2)
  • Re: Stupid Olympics!! - awhtx 10:54:33 02/28/10 (0)
  • Re: Stupid Olympics!! - Kirk-NJ 05:47:46 02/28/10 (0)

• Wheel weights in MO [+] (url) - John (TR) 19:03:26 02/27/10 (2)
  • Re: Wheel weights in MO - HCooke 10:31:31 02/28/10 (0)
  • Re: Wheel weights in MO - Jimmyjack 20:11:37 02/27/10 (0)

• Original N-Tractor Club [+] - Fred (Grand Lake) 18:43:24 02/27/10 (7)
  • Re: Original N-Tractor Club - StanNMi 20:35:26 03/04/10 (0)
  • Re: Original N-Tractor Club (url) - Bruce (VA) 09:56:56 02/28/10 (0)
  • Re: Original N-Tractor Club - Don In France 04:32:57 02/28/10 (1)
    • Re: Original N-Tractor Club - Paladin (Bob In PA) 13:04:37 02/28/10 (0)
  • Re: Original N-Tractor Club - Jock (OR) 02:59:44 02/28/10 (0)
  • Re: Original N-Tractor Club - Tim Daley(MI) 02:20:42 02/28/10 (0)
  • Re: Original N-Tractor Club - Stumpy(NH) 18:50:10 02/27/10 (0)

• Good for another 60 years [+] - John (TR) 14:31:12 02/27/10 (4)
  • Re: Good for another 60 years - StanNMi 20:39:28 03/04/10 (0)
  • Re: Good for another 60 years - Tyler (MD) 20:50:04 02/27/10 (0)
  • Re: Good for another 60 years - heybusdriver 20:36:57 02/27/10 (0)
  • Re: Good for another 60 years (url) - Grand Valley Tractor 14:47:35 02/27/10 (0)

• Let the smoke out of something [+] - Jimmyjack 13:16:21 02/27/10 (8)
  • Re: Let the smoke out of something - JMOR 13:48:10 02/27/10 (7)
    • Re: Let the smoke out of something - Jimmyjack 20:17:58 02/27/10 (6)
      • Re: Let the smoke out of something - JMOR 22:13:43 02/27/10 (5)
        • Re: Let the smoke out of something - Jimmyjack 23:29:01 02/27/10 (4)
          • Re: Let the smoke out of something - JMOR 11:10:21 02/28/10 (3)
            • Re: Let the smoke out of something - Jimmyjack 20:36:57 02/28/10 (2)
              • Re: Let the smoke out of something - charles in Louisiana 10:19:31 03/01/10 (1)
                • Re: Let the smoke out of something - Jimmyjack 10:33:13 03/01/10 (0)

• progress on the 40 [+] - John (TR) 21:26:22 02/26/10 (9)
  • Re: progress on the 40 - Jim.UT 20:52:11 02/27/10 (3)
    • Re: progress on the 40 - Woodworker40 22:48:29 02/27/10 (0)
    • Re: progress on the 40 - John (TR) 22:45:45 02/27/10 (1)
      • Re: progress on the 40 - Jim.UT 16:07:03 02/28/10 (0)
  • Re: progress on the 40 - K.LaRue-VA 23:13:44 02/26/10 (3)
    • Re: progress on the 40 - John (TR) 07:14:34 02/27/10 (2)
      • Re: progress on the 40 - Woodworker40 14:15:07 02/27/10 (1)
        • Re: progress on the 40 - John (TR) 14:32:26 02/27/10 (0)
  • Re: progress on the 40 - Paul O 22:02:33 02/26/10 (0)

• N Complete 9n paint part 2 [+] (pic) - John (TR) 21:15:05 02/26/10 (3)
  • Re: N Complete 9n paint part 2 - Don Doan 12:27:02 02/28/10 (1)
    • Re: N Complete 9n paint part 2 - John (TR) 19:42:44 02/28/10 (0)
  • Re: N Complete 9n paint part 2 - Charles (N.C.) 21:35:25 02/26/10 (0)

• Playing in the snow [+] (url) - Feron 21:13:36 02/26/10 (13)
  • Re: Playing in the snow (pic) - John (TR) 14:35:03 02/27/10 (5)
    • Re: Playing in the snow - StanNMi 16:13:19 03/03/10 (0)
    • Re: Playing in the snow - Feron 16:38:56 02/27/10 (3)
      • Re: Playing in the snow - jon 19:15:06 02/27/10 (2)
        • Re: Playing in the snow - Feron 19:37:00 02/27/10 (1)
          • Re: Playing in the snow - jon 20:16:20 02/27/10 (0)
  • Re: Playing in the snow - Larry (TX) 12:42:04 02/27/10 (0)
  • Re: Playing in the snow - carl ny 09:30:49 02/27/10 (1)
    • Re: Playing in the snow - Feron 19:39:13 02/27/10 (0)
  • Re: Playing in the snow - Kirk-NJ 05:52:00 02/27/10 (1)
    • Re: Playing in the snow - Feron 10:43:16 02/27/10 (0)
  • Re: Playing in the snow - Rick WY 22:12:37 02/26/10 (0)
  • Re: Playing in the snow - John (TR) 21:27:59 02/26/10 (0)

• Keeping your cool [+] (pic) - dave#1 19:34:07 02/26/10 (9)
  • Re: Keeping your cool - Tyler 04:50:35 03/05/10 (0)
  • Re: Keeping your cool - Jim.UT 20:54:34 02/27/10 (0)
  • Re: Keeping your cool - Tony VA 08:22:29 02/27/10 (0)
  • Re: Keeping your cool - 36 coupe 06:57:48 02/27/10 (0)
  • Re: Keeping your cool - K.LaRue-VA 21:57:02 02/26/10 (2)
    • Re: Keeping your cool (pic) - John (TR) 22:45:36 02/26/10 (1)
      • Re: Keeping your cool - K.LaRue-VA 23:22:12 02/26/10 (0)
  • Re: Keeping your cool - John (TR) 21:06:31 02/26/10 (0)
  • Re: Keeping your cool - Chris(TN) 19:45:44 02/26/10 (0)

• Round 2 [+] (pic) - Kirk-NJ 19:00:40 02/26/10 (10)
  • Re: Round 2 - John Murphy 07:08:13 02/27/10 (0)
  • Re: Round 2 - John (TR) 21:30:52 02/26/10 (0)
  • Re: Round 2 - Farmer Dan 20:26:46 02/26/10 (1)
    • Re: Round 2 - Kirk-NJ 05:40:29 02/27/10 (0)
  • Re: Round 2 - charles in Louisiana 19:10:34 02/26/10 (5)
    • Re: Round 2 - Larry (TX) 12:49:25 02/27/10 (0)
    • Re: Round 2 - K.LaRue-VA 20:25:56 02/26/10 (0)
    • Re: Round 2 - Ron 20:18:23 02/26/10 (2)
      • Re: Round 2 - Kirk-NJ 04:56:18 02/27/10 (1)
        • Re: Round 2 - Ron (petra79) 08:05:26 02/27/10 (0)

• 3 ring vs 4 ring [+] - Spuds-IL 15:18:17 02/26/10 (2)
  • Re: 3 ring vs 4 ring - Charles (N.C.) 17:41:27 02/26/10 (0)
  • Re: 3 ring vs 4 ring (url) - Grand Valley Tractor 15:38:08 02/26/10 (0)

• Snowplows [+] - Paladin (Bob In PA) 13:36:32 02/26/10 (5)
  • Re: Snowplows - Farmer Dan 20:29:40 02/26/10 (1)
    • Re: Snowplows - Kirk-NJ 06:23:08 02/27/10 (0)
  • Re: Snowplows - Ultradog MN 14:47:29 02/26/10 (0)
  • Re: Snowplows - Kurt-NEPA 14:20:52 02/26/10 (0)
  • Re: Snowplows - John in Mich 13:47:00 02/26/10 (0)

• cultivator [+] - alexray 13:34:27 02/26/10 (1)
  • Re: cultivator - Ed Gooding (VA) 06:44:41 02/27/10 (0)

• PA. Bieler Sale Trip [+] - Zack(NC) 20:32:30 02/25/10 (2)
  • Re: PA. Bieler Sale Trip - Charlie Cockrell (NC) 21:24:59 02/25/10 (1)
    • Re: PA. Bieler Sale Trip - Zack(NC) 23:01:12 02/25/10 (0)

• Front mount Snow Plow pics for Frank and others [+] - Farmer Dan 17:54:01 02/25/10 (17)
  • Re: Front mount Snow Plow pics for Frank and others - Hardacrefarm 11:47:53 02/26/10 (2)
    • Re: Front mount Snow Plow pics for Frank and others - Farmer Dan 20:18:22 02/26/10 (1)
      • Re: Front mount Snow Plow pics for Frank and others (pic) - Farmer Dan 20:20:44 02/26/10 (0)
  • Re: Front mount Snow Plow pics for Frank and others - Tom from Mi. 09:00:08 02/26/10 (1)
    • Re: Front mount Snow Plow pics for Frank and others - Kurt-NEPA 09:32:47 02/26/10 (0)
  • Re: Front mount Snow Plow pics for Frank and others - Jim Wi 19:14:16 02/25/10 (2)
    • Re: Front mount Snow Plow pics for Frank and others - Farmer Dan 20:22:38 02/25/10 (1)
      • Re: Front mount Snow Plow pics for Frank and others - Kurt-NEPA 07:55:32 02/26/10 (0)
  • Re: Front mount Snow Plow pics for Frank and others - Kurt-NEPA 18:16:33 02/25/10 (8)
    • Re: Front mount Snow Plow pics for Frank and others - Farmer Dan 18:33:36 02/25/10 (7)
      • Re: Front mount Snow Plow pics for Frank and others - Kurt-NEPA 18:55:20 02/25/10 (6)
        • Re: Front mount Snow Plow pics for Frank and others - Rockbiter 10:21:20 02/26/10 (3)
          • Re: Front mount Snow Plow pics for Frank and others - Kurt-NEPA 12:57:27 02/26/10 (2)
            • Re: Front mount Snow Plow pics for Frank and others - Rockbiter 14:25:04 02/26/10 (1)
              • Re: Front mount Snow Plow pics for Frank and others - Kurt-NEPA 14:58:23 02/26/10 (0)
        • Re: Front mount Snow Plow pics for Frank and others - Farmer Dan 20:17:21 02/25/10 (1)
          • Re: Front mount Snow Plow pics for Frank and others - Kurt-NEPA 05:41:45 02/26/10 (0)

• 8N front mount coil [+] - sal 15:08:57 02/25/10 (17)
  • Re: 8N front mount coil - John Murphy 08:50:28 02/26/10 (0)
  • Re: 8N front mount coil - soundguy 17:50:52 02/25/10 (2)
    • Re: 8N front mount coil - sal 12:14:42 02/26/10 (1)
      • Re: 8N front mount coil - soundguy 14:04:27 02/26/10 (0)
  • Re: 8N front mount coil - Farmer Dan 17:42:24 02/25/10 (1)
    • Re: 8N front mount coil (url) - Bruce (VA) 20:09:12 02/25/10 (0)
  • Re: 8N front mount coil (url) - Grand Valley Tractor 16:48:48 02/25/10 (10)
    • Re: 8N front mount coil - soundguy 17:49:17 02/25/10 (9)
      • Re: 8N front mount coil - Grand Valley Tractor 18:22:14 02/25/10 (3)
        • Re: 8N front mount coil - soundguy 19:11:23 02/25/10 (2)
          • Re: 8N front mount coil - Grand Valley Tractor 08:16:43 02/26/10 (1)
            • Re: 8N front mount coil - soundguy 14:01:47 02/26/10 (0)
      • Re: 8N front mount coil - sal 17:59:29 02/25/10 (4)
        • Re: 8N front mount coil (url) - Bruce (VA) 20:28:33 02/25/10 (0)
        • Re: 8N front mount coil - soundguy 19:06:41 02/25/10 (2)
          • Re: 8N front mount coil (pic) - Ken N Tx 07:26:36 02/26/10 (1)
            • Re: 8N front mount coil - soundguy 13:59:46 02/26/10 (0)

• Starter ???? Question [+] - Charles (N.C.) 14:06:45 02/25/10 (3)
  • Re: Starter ???? Question - don b 11:32:12 02/26/10 (0)
  • Re: Starter ???? Question - Russ SoCal 15:57:01 02/25/10 (0)
  • Re: Starter ???? Question - HCooke 14:38:56 02/25/10 (0)

• Arizona auction - owner update [+] - Ken-Pa 11:38:26 02/25/10 (3)
  • Re: Arizona auction - owner update - Paladin (Bob In PA) 23:43:21 02/25/10 (0)
  • Re: Arizona auction - owner update - Rockbiter 12:45:09 02/25/10 (1)
    • Re: Arizona auction - owner update - Rockbiter 12:48:29 02/25/10 (0)

• 8n shifter knob [+] - Kirk-NJ 06:17:54 02/25/10 (10)
  • Re: 8n shifter knob - Will W 07:26:59 02/27/10 (1)
    • Re: 8n shifter knob - Kirk-NJ 08:59:30 02/27/10 (0)
  • Re: 8n shifter knob - Ed Gooding (VA) 06:24:37 02/25/10 (0)
  • Re: 8n shifter knob - Jonas Hastings 06:21:31 02/25/10 (6)
    • Re: 8n shifter knob - don b 11:34:31 02/26/10 (5)
      • Re: 8n shifter knob - Jonas Hastings 16:15:46 02/26/10 (1)
        • Re: 8n shifter knob - don b 16:21:04 02/26/10 (0)
      • Re: 8n shifter knob - Randy(PA) 13:23:05 02/26/10 (2)
        • Re: 8n shifter knob - don b 16:16:52 02/26/10 (1)
          • Re: BB parts - Randy(PA) 08:17:01 03/02/10 (0)

• not my week [+] - John (TR) 05:51:55 02/25/10 (31)
  • Re: not my week - Don Doan 14:55:06 02/25/10 (1)
    • Re: not my week - John (TR) 00:10:23 02/26/10 (0)
  • Re: not my week - heybusdriver 12:20:44 02/25/10 (1)
    • Re: not my week - John (TR) 07:51:04 02/26/10 (0)
  • Re: not my week - Farmer Dan 10:21:25 02/25/10 (1)
    • Not really - TheOldHokie 11:42:57 02/25/10 (0)
  • Re: not my week - Lynn Patrick 09:46:43 02/25/10 (3)
    • Re: not my week - Ed Gooding (VA) 04:26:21 02/26/10 (0)
    • Re: not my week - Larry (TX) 14:40:15 02/25/10 (1)
      • Re: not my week - Lynn Patrick 15:29:20 02/25/10 (0)
  • Re: not my week - Grand Valley Tractor 09:32:44 02/25/10 (8)
    • Re: not my week - Kevin(FL) 20:50:12 02/25/10 (5)
      • Re: not my week - carl ny 14:50:37 02/26/10 (2)
        • Re: not my week - Kevin(FL) 08:23:26 02/27/10 (1)
          • Re: not my week - carl ny 09:12:44 02/27/10 (0)
      • Re: not my week - Grand Valley Tractor 08:15:45 02/26/10 (1)
    • Re: not my week - CaribooHarry 09:58:33 02/25/10 (0)
    • Good point - John (TR) 09:57:53 02/25/10 (0)
  • Re: not my week - john, carmel, ny 08:59:15 02/25/10 (0)
  • Re: not my week - Sammy 08:15:40 02/25/10 (2)
    • Re: not my week - John (TR) 09:07:38 02/25/10 (1)
      • Re: not my week - K.LaRue-VA 14:53:58 02/25/10 (0)
  • Re: not my week - TheOldHokie 07:48:00 02/25/10 (1)
    • Re: not my week - John (TR) 08:57:06 02/25/10 (0)
  • Then there's the radiator(s) - John (TR) 07:03:10 02/25/10 (5)
    • Re: Then there's the radiator(s) - soundguy 08:47:15 02/25/10 (0)
    • Re: Then there's the radiator(s) - mark b. williams 07:26:29 02/25/10 (3)
      • Re: Then there's the radiator(s) - John (TR) 08:57:47 02/25/10 (2)
        • Re: Then there's the radiator(s) - Scott pa 22:18:40 02/25/10 (1)
          • Re: Then there's the radiator(s) - John (TR) 00:18:08 02/26/10 (0)

• '39 drawbar?? [+] (url) - Bruce(OR) 01:15:32 02/25/10 (1)
  • Re: '39 drawbar?? - mark b. williams 07:30:27 02/25/10 (0)

• Snow Plow [+] - frank kappner 21:30:40 02/24/10 (6)
  • Re: Snow Plow - Ed Gooding (VA) 15:19:25 02/25/10 (0)
  • Re: Snow Plow (url) - Farmer Dan 00:09:18 02/25/10 (4)
    • Re: Snow Plow - frank kappner 10:06:48 02/25/10 (3)
      • Re: Snow Plow - Farmer Dan 10:15:00 02/25/10 (2)
        • Re: Snow Plow - frank kappner 15:00:22 02/27/10 (1)
          • Re: Snow Plow - Farmer Dan 21:41:27 02/27/10 (0)

• ID on a 3000 [+] - LeRoy 21:09:10 02/24/10 (4)
  • Re: ID on a 3000 (pic) - Ed Gooding (VA) 23:45:24 02/24/10 (2)
    • Re: ID on a 3000 - LeRoy 02:59:32 02/26/10 (0)
    • Re: ID on a 3000 - Dave Robertson 16:25:42 02/25/10 (0)
  • Re: ID on a 3000 - awhtx 22:00:52 02/24/10 (0)

• 61 Yr. Old Thermostat [+] - Fred (Grand Lake) 21:02:39 02/24/10 (15)
  • Re: 61 Yr. Old Thermostat - 36 coupe 07:18:32 02/27/10 (0)
  • Re: 61 Yr. Old Thermostat - Fred (Grand Lake) 21:15:36 02/24/10 (11)
    • Re: 61 Yr. Old Thermostat - awhtx 22:03:32 02/24/10 (10)
      • Re: 61 Yr. Old Thermostat - Fred (Grand Lake) 08:38:29 02/25/10 (9)
        • Re: 61 Yr. Old Thermostat - Bruce (VA) 09:19:06 02/25/10 (8)
          • Re: 61 Yr. Old Thermostat - don b 10:01:16 02/25/10 (7)
            • Re: 61 Yr. Old Thermostat - Bruce (VA) 11:52:36 02/25/10 (5)
              • Re: 61 Yr. Old Thermostat - Fred (Grand Lake) 13:21:10 02/25/10 (4)
                • Re: 61 Yr. Old Thermostat - don b 12:02:28 02/26/10 (3)
                  • Re: 61 Yr. Old Thermostat - Randy(PA) 13:10:32 02/26/10 (2)
                    • Re: 61 Yr. Old Thermostat - don b 13:57:30 02/26/10 (1)
                      • Re: 61 Yr. Old Thermostat - 36 coupe 07:35:13 02/27/10 (0)
            • Re: 61 Yr. Old Thermostat (url) - Grand Valley Tractor 10:38:11 02/25/10 (0)
  • Re: 61 Yr. Old Thermostat (url) - Bruce (VA) 21:08:40 02/24/10 (1)
    • Re: 61 Yr. Old Thermostat - Fred (Grand lake) 21:29:04 02/24/10 (0)

• N Complete paint [+] (url) - John (TR) 19:37:04 02/24/10 (12)
  • Re: N Complete paint - Jon Rhee (RI) 13:59:29 02/25/10 (0)
  • Re: N Complete paint - Don Doan 21:51:30 02/24/10 (2)
    • Re: N Complete paint - John (TR) 05:25:42 02/25/10 (0)
    • Re: N Complete paint - John (TR) 21:59:54 02/24/10 (0)
  • Re: N Complete paint - Ron 20:29:38 02/24/10 (0)
  • Re: N Complete paint (pic) - wwildhorse2k 20:19:10 02/24/10 (3)
    • Re: N Complete paint - alexray 19:36:03 02/25/10 (1)
      • Re: N Complete paint - wwildhorse2k 07:13:24 02/26/10 (0)
    • Re: N Complete paint - heybusdriver 22:44:36 02/24/10 (0)
  • Re: N Complete paint - Larry 20:18:48 02/24/10 (2)
    • Re: N Complete paint - John (TR) 20:52:18 02/24/10 (1)
      • Re: N Complete paint - Jimmyjack 10:50:37 02/25/10 (0)

• 2 questions [+] - Casey 19:23:02 02/24/10 (7)
  • Re: 2 questions - Casey 21:29:57 02/26/10 (0)
  • Re: 2 questions - LeRoy 03:05:46 02/26/10 (1)
    • Re: 2 questions - Casey 07:40:07 02/26/10 (0)
  • Re: 2 questions - soundguy 19:42:58 02/24/10 (3)
    • Re: 2 questions - Casey 20:34:49 02/24/10 (2)
      • Re: 2 questions - K.LaRue-VA 22:17:40 02/24/10 (0)
      • Re: 2 questions - soundguy 22:07:17 02/24/10 (0)

• Fender Question [+] (url) - Farmer Dan 06:54:00 02/24/10 (10)
  • Re: Fender Question - don b 10:45:50 02/24/10 (0)
  • Re: Fender Question - John (TR) 07:28:55 02/24/10 (1)
    • Re: Fender Question - Dean 08:14:34 02/24/10 (0)
  • Re: Fender Question - Tyler (MD) 07:25:35 02/24/10 (3)
    • Re: Fender Question - Farmer Dan 07:48:19 02/24/10 (2)
      • Re: Fender Question - Tyler (MD) 08:52:46 02/24/10 (1)
        • Re: Fender Question - Farmer Dan 00:12:17 02/25/10 (0)
  • Re: Fender Question - Dollar Bill 07:24:01 02/24/10 (1)
    • Re: Fender Question - Jonas Hastings 16:33:03 02/24/10 (0)
  • Re: Fender Question (pic) - Ken N Tx 07:07:55 02/24/10 (0)

• oil pressure [+] - Doug Bosscher 23:06:38 02/23/10 (3)
  • Re: oil pressure - wwildhorse2k 21:46:45 02/24/10 (0)
  • Re: oil pressure - soundguy 00:25:40 02/24/10 (0)
  • Re: oil pressure - Russ SoCal 00:15:14 02/24/10 (0)

• Anybody doing anything with a Howard lately! [+] - Don Brown (NH) 22:52:37 02/23/10 (1)
  • Re: Anybody doing anything with a Howard lately! - Dollar Bill 07:32:22 02/24/10 (0)

• Ns at War [+] (url) - Ultradog MN 22:51:55 02/23/10 (2)
  • Re: Ns at War - Tim Daley(MI) 06:30:50 02/25/10 (0)
  • Re: Ns at War - Paladin (Bob In PA) 23:12:05 02/24/10 (0)

• wireing [+] - tmiller 22:40:11 02/23/10 (6)
  • Re: wireing - mark b. williams 07:20:24 02/25/10 (1)
    • Re: wireing - tmiller 12:58:32 02/25/10 (0)
  • Re: wireing - Dollar Bill 12:37:46 02/24/10 (0)
  • Re: wireing - JMOR 23:33:15 02/23/10 (2)
    • Re: wireing - tmiller 11:18:16 02/24/10 (1)
      • Re: wireing (url) - BeeMO 15:12:50 02/26/10 (0)

• Thanks John (TR) [+] - K.LaRue-VA 22:31:04 02/23/10 (1)
  • Re: Thanks John (TR) - John (TR) 05:51:45 02/24/10 (0)

• Dearborn paint colors [+] - Brad 20:44:00 02/23/10 (12)
  • Re: Dearborn paint colors (pic) - John (TR) 05:39:02 02/25/10 (0)
  • Re: Dearborn paint colors - Tim Daley(MI) 06:41:14 02/24/10 (2)
    • Re: Dearborn paint colors - Brad 20:30:59 02/24/10 (1)
      • Re: Dearborn paint colors - Tim Daley(MI) 06:34:07 02/25/10 (0)
  • Re: Dearborn paint colors - K.LaRue-VA 21:18:01 02/23/10 (0)
  • Re: Dearborn paint colors - Feron 21:15:21 02/23/10 (6)
    • Re: Dearborn paint colors - Brad 21:59:02 02/23/10 (0)
    • Re: Dearborn paint colors - K.LaRue-VA 21:40:32 02/23/10 (4)
      • Re: Dearborn paint colors - 1951 8N PA 05:20:42 02/25/10 (0)
      • Re: Dearborn paint colors - Dave H 09:03:32 02/24/10 (1)
        • Re: Dearborn paint colors - K.LaRue-VA 13:02:37 02/24/10 (0)
      • Re: Dearborn paint colors - Feron 21:52:16 02/23/10 (0)

• 8 n oil pressure [+] - Jim Galvin 20:41:49 02/23/10 (4)
  • Re: 8 n oil pressure - TheOldHokie 08:25:45 02/24/10 (0)
  • Re: 8 n oil pressure - mark b. williams 07:33:21 02/24/10 (0)
  • Re: 8 n oil pressure - Charles (N.C.) 22:34:15 02/23/10 (0)
  • Re: 8 n oil pressure - K.LaRue-VA 21:04:59 02/23/10 (0)

• 5 Gallon sealable electrolysis [+] - mark b. williams 23:14:04 02/22/10 (17)
  • Re: 5 Gallon sealable electrolysis - carl ny 20:35:46 02/23/10 (2)
    • Re: 5 Gallon sealable electrolysis - mark b. williams 07:40:06 02/24/10 (1)
      • Re: 5 Gallon sealable electrolysis - carl ny 20:35:59 02/24/10 (0)
  • Re: 5 Gallon sealable electrolysis - K.LaRue-VA 12:47:08 02/23/10 (0)
  • Re: 5 Gallon sealable electrolysis - mike from manitoba 10:00:12 02/23/10 (2)
    • Re: 5 Gallon sealable electrolysis "PLANS LINK" (url) - Kevin(FL) 11:32:03 02/24/10 (0)
    • Re: 5 Gallon sealable electrolysis - Mark B. Williams 10:36:05 02/23/10 (0)
  • Re: 5 Gallon sealable electrolysis (url) - Bruce (VA) 09:41:43 02/23/10 (9)
    • Re: 5 Gallon sealable electrolysis - Chris(TN) 05:55:58 02/24/10 (1)
      • Re: 5 Gallon sealable electrolysis - Bruce (VA) 09:47:38 02/24/10 (0)
    • Re: 5 Gallon sealable electrolysis - Mark B. Williams 10:29:39 02/23/10 (6)
      • Re: 5 Gallon sealable electrolysis - JMOR 18:08:15 02/23/10 (5)
        • Re: 5 Gallon sealable electrolysis - Chris(TN) 18:41:42 02/24/10 (2)
          • Re: 5 Gallon sealable electrolysis - carl ny 20:34:01 02/24/10 (1)
            • Re: 5 Gallon sealable electrolysis - mark b. williams 07:11:31 02/25/10 (0)
        • Re: 5 Gallon sealable electrolysis - Mark B. Williams 10:29:47 02/24/10 (0)
        • Re: 5 Gallon sealable electrolysis - mark b. williams 07:35:56 02/24/10 (0)

• Piston Rod Cap Nuts [+] - Chris (TN) 22:26:49 02/22/10 (10)
  • Re: Piston Rod Cap Nuts - Chris (TN) 20:15:32 02/23/10 (0)
  • Re: Piston Rod Cap Nuts - Russ SoCal 13:00:33 02/23/10 (0)
  • Re: Piston Rod Cap Nuts - Charles (N.C.) 11:53:09 02/23/10 (0)
  • Re: Piston Rod Cap Nuts - LeeMo 10:36:24 02/23/10 (1)
    • Re: Piston Rod Cap Nuts - RichieRich 10:45:47 02/23/10 (0)
  • Re: Piston Rod Cap Nuts - John Murphy 09:25:42 02/23/10 (0)
  • Re: Piston Rod Cap Nuts (pic) - TimW(PA) 08:32:07 02/23/10 (1)
    • Re: Piston Rod Cap Nuts - RichieRich 17:53:14 02/24/10 (0)
  • Re: Piston Rod Cap Nuts - John (TR) 07:04:01 02/23/10 (0)
  • Re: Piston Rod Cap Nuts - Jock (OR) 03:07:21 02/23/10 (0)

• Piston Pump Rebuild [+] - Vince/PA 22:19:55 02/22/10 (6)
  • Re: Piston Pump Rebuild - Ed Ridgeway CO 11:08:09 02/23/10 (0)
  • Re: Piston Pump Rebuild (url) - Grand Valley Tractor 08:31:59 02/23/10 (2)
    • Re: Piston Pump Rebuild - Ed Ridgeway CO 11:43:20 02/23/10 (1)
      • Re: Piston Pump Rebuild - Grand Valley Tractor 11:52:43 02/23/10 (0)
  • Re: Piston Pump Rebuild - Tim Daley(MI) 06:34:24 02/23/10 (0)
  • Re: Piston Pump Rebuild - Paladin (Bob In PA) 22:53:51 02/22/10 (0)

• brake shoe pivot plate picture and question [+] (pic) - boomer632 21:27:20 02/22/10 (4)
  • Re: brake shoe pivot plate picture and question - boomer632 08:26:23 02/23/10 (1)
    • Re: brake shoe pivot plate picture and question - Mal(Pa) 09:31:33 02/23/10 (0)
  • Re: brake shoe pivot plate picture and question - Mal(Pa) 23:33:21 02/22/10 (0)
  • Re: brake shoe pivot plate picture and question - heybusdriver 23:12:34 02/22/10 (0)

• question for 9n okie [+] - charles in louisiana 21:10:47 02/22/10 (2)
  • Re: question for 9n okie - 9N OKIE 23:42:26 02/22/10 (1)
    • Re: question for 9n okie - charles in Louisiana 08:49:29 02/24/10 (0)

• How bad is it? 2N Steering question [+] - DAVE2N 20:54:35 02/22/10 (2)
  • Re: How bad is it? 2N Steering question - HCooke 21:32:12 02/22/10 (0)
  • Re: How bad is it? 2N Steering question - Philny 21:03:33 02/22/10 (0)

• Noisy Transmission [+] - John (TR) 20:18:20 02/22/10 (1)
  • Re: Noisy Transmission - Dan 08:50:49 02/23/10 (0)

• What do you make of these plugs? [+] (pic) - Farmer Dan 19:28:54 02/22/10 (15)
  • Re: What do you make of these plugs? - Jimmyjack 10:50:04 02/23/10 (0)
  • Re: What do you make of these plugs? - soundguy 10:37:21 02/23/10 (1)
    • Re: What do you make of these plugs? - LeeMo 10:39:46 02/23/10 (0)
  • Re: What do you make of these plugs? - Stevo 21:19:06 02/22/10 (1)
    • Re: What do you make of these plugs? - Farmer Dan 16:49:19 02/23/10 (0)
  • Re: What do you make of these plugs? - 9N OKIE 21:04:11 02/22/10 (0)
  • Re: What do you make of these plugs? (url) - Ed Gooding (VA) 20:22:14 02/22/10 (3)
    • Re: What do you make of these plugs? (url) - Ed Gooding (VA) 20:47:49 02/23/10 (0)
    • Re: What do you make of these plugs? - Farmer Dan 16:46:48 02/23/10 (1)
      • Re: What do you make of these plugs? - Ed Gooding (VA) 18:21:46 02/23/10 (0)
  • Re: What do you make of these plugs? - John (TR) 20:20:43 02/22/10 (0)
  • Re: What do you make of these plugs? - K.LaRue-VA 19:50:02 02/22/10 (1)
    • Re: What do you make of these plugs? - Dean 19:58:18 02/23/10 (0)
  • Re: What do you make of these plugs? - Rob Pow Va 19:42:29 02/22/10 (0)
  • Re: What do you make of these plugs? - r geiger 19:33:30 02/22/10 (0)

• Hats in todays mail [+] - Dave Smith 19:26:05 02/22/10 (0)

• Playing in the Snow 1944 2N Combo [+] - wwildhorse2k 18:17:13 02/22/10 (2)
  • Re: Playing in the Snow 1944 2N Combo - 9N OKIE 20:56:13 02/22/10 (1)
    • Re: Playing in the Snow 1944 2N Combo - K.LaRue-VA 13:12:31 02/23/10 (0)

• Starting/Running Follow up [+] - JC 16:45:11 02/22/10 (2)
  • Re: Starting/Running Follow up (url) - Bruce (VA) 16:58:28 02/22/10 (1)
    • Re: Starting/Running Follow up - soundguy 12:36:32 02/23/10 (0)

• What size socket? [+] - Rick N 16:34:52 02/22/10 (2)
  • Re: What size socket? (url) - Bruce (VA) 17:11:31 02/22/10 (1)
    • Re: What size socket? - Rick N 18:27:33 02/22/10 (0)

• Outstanding guy [+] - Greg W 15:35:05 02/22/10 (6)
  • Re: Outstanding guy - LeeMo 10:45:02 02/23/10 (0)
  • Re: Outstanding guy - John in Mich 10:44:32 02/23/10 (0)
  • Re: Outstanding guy (url) - Grand Valley Tractor 15:47:37 02/22/10 (3)
    • Re: Outstanding guy - awhtx 16:47:12 02/22/10 (2)
      • Re: Outstanding guy - Grand Valley Tractor 20:58:07 02/22/10 (1)
        • Re: Outstanding guy - Greg W 21:41:18 02/22/10 (0)

• water in my bath [+] - redfire312 14:26:55 02/22/10 (2)
  • Re: water in my bath (url) - mhb@ufe 15:35:49 02/22/10 (0)
  • Re: water in my bath - soundguy 14:32:50 02/22/10 (0)

• Paint Dulling? [+] - Dave H 12:43:20 02/22/10 (4)
  • Re: Paint Dulling? - Josh Cronk 18:22:52 02/22/10 (0)
  • Re: Paint Dulling? - Charles (N.C.) 15:21:45 02/22/10 (0)
  • Re: Paint Dulling? - soundguy 14:30:36 02/22/10 (0)
  • Re: Paint Dulling? - K.LaRue-VA 14:00:48 02/22/10 (0)

• thanks bruceva [+] - james rigler 11:52:00 02/22/10 (1)
  • Re: thanks bruceva (url) - Bruce (VA) 14:17:52 02/22/10 (0)

• sticky engine [+] - tom 11:19:18 02/22/10 (9)
  • Re: sticky engine - Stevo 16:50:10 02/22/10 (0)
  • Re: sticky engine - Dan 2N 12:39:24 02/22/10 (0)
  • Re: sticky engine - soundguy 12:05:37 02/22/10 (6)
    • Re: sticky engine - tom 13:29:58 02/22/10 (5)
      • Re: sticky engine - Dave H 14:07:00 02/22/10 (0)
      • Re: sticky engine - soundguy 14:01:00 02/22/10 (3)
        • Re: sticky engine - tom 14:46:48 02/22/10 (2)
          • Re: sticky engine - soundguy 14:56:41 02/22/10 (0)
          • Re: sticky engine - Paladin (Bob IN PA) 14:52:08 02/22/10 (0)

• Ford 9n Question [+] - Casey Keele 08:04:07 02/22/10 (8)
  • Sleeve Tutorial - Paladin (Bob In PA) 09:35:53 02/22/10 (2)
    • Re: Sleeve Tutorial - Casey 19:18:13 02/22/10 (1)
      • Re: Sleeve Tutorial - Paladin (Bob In PA) 22:48:16 02/22/10 (0)
  • Re: Ford 9n Question - TheOldHokie 09:33:39 02/22/10 (0)
  • Re: Ford 9n Question (url) - Grand Valley Tractor 09:01:41 02/22/10 (0)
  • Re: Ford 9n Question - K.LaRue-VA 08:52:15 02/22/10 (0)
  • Re: Ford 9n Question - TheOldHokie 08:38:34 02/22/10 (0)
  • Re: Ford 9n Question - Charles (N.C.) 08:29:42 02/22/10 (0)

• Electric 8N [+] (url) - StormCloud601 07:06:04 02/22/10 (3)
  • Re: Electric 8N (url) - Stevo 13:13:03 02/22/10 (0)
  • Re: Electric 8N - K.LaRue-VA 08:31:02 02/22/10 (0)
  • Re: Electric 8N - JMOR 08:27:43 02/22/10 (0)

• Help With Cultivator ID [+] (url) - Tydyyn Bach 06:40:00 02/22/10 (4)
  • Re: Help With Cultivator ID - Tyddyn Bach 11:56:34 02/22/10 (1)
    • Re: Help With Cultivator ID - Ed Gooding (VA) 08:29:22 02/23/10 (0)
  • Re: Help With Cultivator ID - Zack(NC) 10:28:03 02/22/10 (0)
  • Re: Help With Cultivator ID - Ed Gooding (VA) 07:40:51 02/22/10 (0)

• Neat Find [+] - K.LaRue-VA 21:55:21 02/21/10 (6)
  • Re: Neat Find - Hardacrefarm 10:31:20 02/22/10 (2)
    • Re: Neat Find - K.LaRue-VA 16:00:15 02/22/10 (1)
      • Re: Neat Find - Jon Rhee (RI) 13:54:19 02/24/10 (0)
  • Re: Neat Find - jimNCal 22:29:05 02/21/10 (2)
    • Re: Neat Find - K.LaRue-VA 22:57:51 02/21/10 (1)
      • Re: Neat Find - Stumpy(NH) 05:37:21 02/22/10 (0)

• Piston Rings: Plain or Chrome [+] - Chris (TN) 20:00:49 02/21/10 (5)
  • Re: Piston Rings: Plain or Chrome - Chris (TN) 06:24:11 02/22/10 (0)
  • Re: Piston Rings: Plain or Chrome - Charles (N.C.) 22:08:35 02/21/10 (1)
    • Re: Piston Rings: Plain or Chrome - Ken(Ark) 09:30:19 02/22/10 (0)
  • Re: Piston Rings: Plain or Chrome - Vince/PA 21:24:22 02/21/10 (0)
  • Re: Piston Rings: Plain or Chrome - John (TR) 20:20:48 02/21/10 (0)

• Lapping Valves [+] - Chris(TN) 19:40:12 02/21/10 (7)
  • Re: Lapping Valves - TheOldHokie 07:31:36 02/22/10 (1)
    • Re: Lapping Valves - Dean 08:06:06 02/22/10 (0)
  • Re: Lapping Valves (pic) - John (TR) 20:17:29 02/21/10 (4)
    • Re: Lapping Valves - Dan 09:42:33 02/22/10 (1)
      • Re: Lapping Valves - John (TR) 20:47:12 02/22/10 (0)
    • Re: Lapping Valves - heybusdriver 00:45:10 02/22/10 (1)
      • Re: Lapping Valves - John (TR) 05:54:01 02/22/10 (0)

• Piston Ring Troubles [+] - Chris (TN) 19:28:55 02/21/10 (5)
  • Re: Piston Ring Troubles - John Murphy 08:32:03 02/22/10 (2)
    • Re: Piston Ring Troubles - TheOldHokie 08:46:50 02/22/10 (1)
      • Re: Piston Ring Troubles - Chris (TN) 22:15:41 02/22/10 (0)
  • Re: Piston Ring Troubles - Joe Scribner 00:10:33 02/22/10 (0)
  • Re: Piston Ring Troubles - John (TR) 20:11:23 02/21/10 (0)

• 2N Seat [+] - ALZ (MO) 15:48:25 02/21/10 (11)
  • Re: 2N Seat - K.LaRue-VA 19:23:26 02/21/10 (0)
  • Re: 2N Seat (pic) - Ed Gooding (VA) 18:28:44 02/21/10 (0)
  • Re: 2N Seat (pic) - Paul O 16:48:18 02/21/10 (8)
    • Re: 2N Seat - Keith 44' 2N 17:27:41 02/21/10 (7)
      • Re: 2N Seat - Paul O 21:59:47 02/21/10 (0)
      • Re: 2N Seat - AL CT 17:41:14 02/21/10 (5)
        • Re: 2N Seat (pic) - Ken N Tx 05:26:41 02/22/10 (2)
          • Re: 2N Seat - AL CT 08:00:07 02/22/10 (1)
            • Re: 2N Seat - HCooke 18:15:33 02/22/10 (0)
        • Re: 2N Seat - Paul O 22:09:41 02/21/10 (1)
          • Re: 2N Seat - AL CT 07:54:06 02/22/10 (0)

• Voltage regulator problems [+] - Cory G in MI 14:24:42 02/21/10 (4)
  • Re: Voltage regulator problems - soundguy 10:20:47 02/22/10 (0)
  • Re: Voltage regulator problems - Tim Daley(MI) 15:18:24 02/21/10 (2)
    • Re: Voltage regulator problems - Cory G in MI 15:39:12 02/21/10 (1)
      • Re: Voltage regulator problems - Paladin (Bob IN PA) 18:38:19 02/21/10 (0)

• Painting Question [+] - Charles (N.C.) 13:31:14 02/21/10 (6)
  • Re: Painting Question - soundguy 10:38:35 02/22/10 (0)
  • Re: Painting Question - Charles (N.C.) 08:16:56 02/22/10 (0)
  • Re: Painting Question - LarryD(VA) 06:28:14 02/22/10 (0)
  • Re: Painting Question - Dollar Bill 01:41:04 02/22/10 (0)
  • Re: Painting Question - K.LaRue-VA 20:15:21 02/21/10 (0)
  • Re: Painting Question - Don Doan 15:07:54 02/21/10 (0)

• Old Ford/Dearborn sign [+] - Ed Gooding (VA) 12:23:44 02/21/10 (2)
  • Re: Old Ford/Dearborn sign - Ultradog MN 17:55:33 02/21/10 (1)
    • Re: Old Ford/Dearborn sign - Ed Gooding (VA) 18:44:35 02/21/10 (0)

• New in our Manuals section [+] - Ed Gooding (VA) 06:48:25 02/21/10 (4)
  • Re: New in our Manuals section - Mel-N-WV 08:54:12 02/21/10 (0)
  • Re: New in our Manuals section - John (TR) 08:25:36 02/21/10 (2)
    • Re: New in our Manuals section - Ed Gooding (VA) 08:36:39 02/21/10 (1)
      • Re: New in our Manuals section - SWMO 22:49:32 02/21/10 (0)

• Not Just A Pretty Face [+] - Don Doan 18:09:01 02/20/10 (20)
  • Re: Not Just A Pretty Face - LeeMo 15:32:24 02/22/10 (2)
    • Re: Not Just A Pretty Face - Don Doan 15:46:34 02/22/10 (1)
      • Re: Not Just A Pretty Face - Chris (TN) 06:40:06 02/23/10 (0)
  • Re: Not Just A Pretty Face - Larry (TX) 15:12:56 02/21/10 (1)
    • Re: Not Just A Pretty Face - Don Doan 15:33:33 02/21/10 (0)
  • Re: Not Just A Pretty Face - John in St Cloud 14:08:35 02/21/10 (1)
    • Re: Not Just A Pretty Face - Don Doan 15:30:37 02/21/10 (0)
  • Re: Not Just A Pretty Face - Ed Gooding (VA) 08:12:59 02/21/10 (1)
    • Re: Not Just A Pretty Face - Don Doan 11:46:35 02/21/10 (0)
  • Re: Not Just A Pretty Face - ButtonRock 07:45:06 02/21/10 (0)
  • Re: Not Just A Pretty Face - 8Nwarrior(MI) 01:06:06 02/21/10 (0)
  • Re: Not Just A Pretty Face - Stevo 00:48:21 02/21/10 (0)
  • Re: Not Just A Pretty Face - Carson (Ncal) 00:47:05 02/21/10 (0)
  • Re: Not Just A Pretty Face - Jimmyjack 23:28:33 02/20/10 (1)
    • Re: Not Just A Pretty Face - Don Doan 11:38:21 02/21/10 (0)
  • Re: Not Just A Pretty Face - Ultradog MN 22:31:07 02/20/10 (0)
  • Re: Not Just A Pretty Face - Farmer Dan 22:03:13 02/20/10 (0)
  • Re: Not Just A Pretty Face - jon 21:42:00 02/20/10 (1)
    • Re: Not Just A Pretty Face - Don Doan 11:36:29 02/21/10 (0)
  • Re: Not Just A Pretty Face - Tyler (MD) 18:50:29 02/20/10 (0)

• 9N [+] - Mike Treesh 16:36:08 02/20/10 (3)
  • Re: 9N (url) - Paladin (Bob In PA) 14:22:40 02/21/10 (0)
  • Re: 9N (url) - Russ SoCal 17:55:09 02/20/10 (0)
  • Re: 9N - Dan 2N 16:51:20 02/20/10 (0)

• Attached At The Hip [+] - BeeMO 16:30:09 02/20/10 (5)
  • Re: Attached At The Hip - Rob Pow Va 19:45:32 02/20/10 (3)
    • Re: Attached At The Hip - BeeMO 20:50:08 02/20/10 (2)
      • Re: Attached At The Hip - Paladin (Bob In PA) 10:01:06 02/21/10 (1)
        • Re: Attached At The Hip - BeeMO 11:56:12 02/21/10 (0)
  • Re: Attached At The Hip - Rick Douglas 16:47:58 02/20/10 (0)

• overheating [+] - Rick Douglas 13:47:47 02/20/10 (9)
  • Re: overheating - Stevo 17:23:23 02/20/10 (1)
    • Re: overheating (url) - Stevo 17:47:01 02/20/10 (0)
  • Re: overheating - Russ SoCal 16:16:33 02/20/10 (0)
  • Re: overheating - Spuds-IL 16:07:27 02/20/10 (0)
  • Re: overheating - Josh Cronk 13:59:18 02/20/10 (4)
    • Re: overheating - Cory G in MI 14:19:19 02/20/10 (3)
      • Re: overheating - Rick Douglas 15:05:59 02/20/10 (2)
        • Re: overheating - Cory G in MI 15:26:45 02/20/10 (1)
          • Re: overheating - Rick Douglas 16:53:28 02/20/10 (0)

• 2N wrecking yard refugee [+] - Bruce(OR) 10:43:59 02/20/10 (13)
  • It runs, doesn't it? - Paladin (Bob In PA) 09:25:01 02/21/10 (0)
  • Re: 2N wrecking yard refugee - ButtonRock 07:51:27 02/21/10 (0)
  • Re: 2N wrecking yard refugee - Russ SoCal 16:20:00 02/20/10 (1)
    • Re: 2N wrecking yard refugee - Bruce(OR) 22:07:08 02/20/10 (0)
  • Re: 2N wrecking yard refugee - John (TR) 14:09:37 02/20/10 (0)
  • Re: 2N wrecking yard refugee - Jim.UT 12:13:17 02/20/10 (1)
    • Re: 2N wrecking yard refugee - Jim.UT 12:14:11 02/20/10 (0)
  • Giva a man a cutting torch and welder... - TheOldHokie 11:28:12 02/20/10 (0)
  • Re: 2N wrecking yard refugee - DanP 10:59:09 02/20/10 (0)
  • Re: 2N wrecking yard refugee - Bruce(OR) 10:54:35 02/20/10 (3)
    • Re: 2N wrecking yard refugee (url) - Grand Valley Tractor 15:43:58 02/20/10 (2)
      • Re: 2N wrecking yard refugee - Bruce(OR) 21:53:48 02/20/10 (1)
        • Re: 2N wrecking yard refugee - jimNCal 22:34:40 02/21/10 (0)

• Electrolysis Tank [+] - croush 09:00:20 02/20/10 (9)
  • Re: Electrolysis Tank (url) - K.LaRue-VA 20:36:17 02/21/10 (0)
  • Re: Electrolysis Tank - TimW(PA) 13:58:45 02/21/10 (0)
  • Re: Electrolysis Tank - Paladin (Bob IN PA) 09:48:55 02/21/10 (0)
  • Re: Electrolysis Tank - Ken-Pa 10:34:56 02/20/10 (0)
  • Re: Electrolysis Tank (url) - Kevin(FL) 09:36:53 02/20/10 (1)
    • Re: Electrolysis Tank - mark b. williams 23:10:04 02/22/10 (0)
  • Re: Electrolysis Tank (url) - Kevin(FL) 09:19:55 02/20/10 (0)
  • Re: Electrolysis Tank (url) - Bruce (VA) 09:07:36 02/20/10 (1)
    • Re: Electrolysis Tank - Jack - Iowa 00:27:27 02/21/10 (0)

• Ignition indicator light [+] - Daryl Moss 08:23:01 02/20/10 (6)
  • Re: Ignition indicator light - Calibre 10:29:39 02/21/10 (0)
  • Re: Ignition indicator light - BeeMO 11:27:08 02/20/10 (2)
    • Re: Ignition indicator light - Daryl Moss 17:20:03 02/20/10 (1)
      • Re: Ignition indicator light - BeeMO 21:11:37 02/20/10 (0)
  • Re: Ignition indicator light - HCooke 10:24:58 02/20/10 (0)
  • Re: Ignition indicator light (url) - JMOR 08:30:20 02/20/10 (0)

---

[ Post a Message ] [ Top ]