N Board Forum - Expanded Thread Page

Subject: 9n won't start resolution now it will start .

[Back] [Return to Top of Forum]

Dan Chisler    Posted 08-04-2017 at 13:10:13 [URL] [DELETE]        [Reply] [Email]  
  • 9n won't start resolution now it will start .
  • farmer Dan here . hit the farm with lots of ideas . tried to short the hi current switch .Then put one hand on belt to tighten and tried to turn the fan blade ....frozen solid so i figured I must have wedged the starter pinyon by not letting it wind down from a starting session . removed the starter and put it back on then it started rite up like a good boy and i learned a good lesson to always let it wind down after a start try .Now on to the 3 other problems I will post info on them after i try all the ideas i got from this forum .

    Dave H    Posted 08-05-2017 at 08:15:38 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 9n won't start resolution now it will start .
  • As a youngster, we always unstuck it like mnb described.

    Dan Chisler    Posted 08-05-2017 at 10:31:49 [URL] [DELETE]        [Reply] [Email]  
  • Re: 9n won't start resolution now it will start .
  • Hopefully when i start i will show more patience and let it wind down and maybe there won't be the next time . But may try that way thanks .

    mhb@ufe    Posted 08-05-2017 at 07:02:50 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 9n won't start resolution now it will start .
  • Sometimes you can unlock the starter by putting the transmission in high gear and rock the tractor back and forth with the rear tire.

    Mark

    Dan Chisler    Posted 08-05-2017 at 10:26:04 [URL] [DELETE]        [Reply] [Email]  
  • Re: 9n won't start resolution now it will start .
  • Yes I suppose so . It is pretty easy to get at the starter on a tractor I also wanted to see if things were okay with the gears . The starter ring does have sharp edges . If i ever have the ring gear exposed i would clean up the ring gear with a small file.

    clayton ingmire    Posted 08-04-2017 at 16:16:33 [URL] [DELETE]        [Reply] [Email]  
  • Re: 9n won't start resolution now it will start .
  • next time if the starter jams turn the motor backwards key off holding down on the belt grab the fan and try rocking it worth a try before removing starter

    [Back] [Return to Top of Forum]


    Top