N Board Forum - Expanded Thread Page

Subject: 9N serial number

[Back] [Return to Top of Forum]

rick martin    Posted 10-02-2017 at 23:23:11 [URL] [DELETE]        [Reply] [Email]  
  • 9N serial number
  • did they make an Industrial 9N????,as my serial/ID number starts out with 9NI and then the number,,,thanks for your help in advance

    steveVa    Posted 10-03-2017 at 19:33:43 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 9N serial number
  • The I could be a 1. See John Smiths tractor site...

    Tim Daley(MI)    Posted 10-03-2017 at 03:32:43 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 9N serial number
  • Rick-
    Yes, Ford made an Industrial 9N Model, the 9NBN -SEE LINK BELOW -but the serial number would have 9NBN in the prefix. Ford used the hand stamps as pictured for all vehicle serial numbers of commercial car, truck, and tractors. Note the lower case letter 'b' for 6 and inverted for number 9; and capital letter 'I' for numeral '1'. Up until 1950, s/n's used the STAR * symbol before and after to designate steel cylinder liners. Note, this system was used on ALL vehicles, not juts tractors.


    Tim Daley(MI)

    Randy(PA)    Posted 10-03-2017 at 01:04:15 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 9N serial number
  • Ford used the I instead of the 1, so your serial number starts with a one.

    rick martin    Posted 10-03-2017 at 06:03:32 [URL] [DELETE]        [Reply] [No Email]  
  • Re: 9N serial number
  • Thanks guys,,,this clears it up for me,,,your help is much apreacated

    [Back] [Return to Top of Forum]