N Board Forum - Expanded Thread Page

Subject: Jubilee distributor bushing replacement.

[Back] [Return to Top of Forum]

ArtMo    Posted 01-14-2019 at 14:02:11 [URL] [DELETE]        [Reply] [Email]  
  • Jubilee distributor bushing replacement.
  • Jubilee #24379. Distributor shaft bushing replacement. Am unable to remove the drive gear from the shaft after removing the rivet. Have tried soaking the shaft in solvent and taping the shaft from the drive end. Have not used heat. Is there something I am missing? Many thanks!

    Rustyal    Posted 01-14-2019 at 15:31:40 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Jubilee distributor bushing replacement.
  • I had the same problem when trying to rebuild mine. Couldn’t even remove the pin.

    ArtMo    Posted 01-14-2019 at 15:42:04 [URL] [DELETE]        [Reply] [Email]  
  • Re: Jubilee distributor bushing replacement.
  • Was able to remove the rivet with a small punch and driver but the gear appears to be frozen to the shaft and will not move. From my interpretation of the parts diagram, there is nothing but the rivet securing the gear to the shaft. Will attempt a soaking overnight in solvent.

    JMOR    Posted 01-14-2019 at 16:14:16 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Jubilee distributor bushing replacement.
  • had to use a hydraulic press.

    [Back] [Return to Top of Forum]


    Top