N Board Forum - Expanded Thread Page

Subject: generator belt adjuster

[Back] [Return to Top of Forum]

Rich    Posted 03-12-2020 at 09:07:21 [URL] [DELETE]        [Reply] [Email]  
  • generator belt adjuster
  • Im looking for a belt adjuster for my 1946 2N Ford. The manual has an assembly number 10181.The book also has the parts broken down with part numbers and all the sites i have visited nothing is coming up with any of the number.i looked at Just8N, Stiener Tractor, Yesterday tractor and others.any and all help will be great.

    Tim Daley(MI)    Posted 03-12-2020 at 14:26:39 [URL] [DELETE]        [Reply] [Email]  
  • Re: generator belt adjuster
  • HiYa Rich-
    The OEM belt tensioner is NLA meaning no longer made or serviced -nobody repops them today. BTW YT does not make any parts, only supplies from vendors. The 9N/2N Belt Tensioner was first offered on the 2N-10000 generator as an attached part included with the unit. At the same time FORD offered an optional belt tensioner for the 9N-10000-C generator but used a steel belt that the barrel attached to. NOTE pictures show both. The optional device was a dealer supplied accessory. The generators were virtually the same unit, the same barrel diameter, a 1-Wire/3-Brush, 11 AMP, A-Circuit unit except the earlier 9N-C generator did not have the attached stationery bracket using two bolts. The steel band included the required bracket needed. I have a restored/rebuilt to OEM specs 2N-10000 complete with the belt tensioner for sale and also a tensioner kit for the 9N-10000-C unit. NOTE: The belt tensioner on the first two 9N generators, the '9N-A' and the '9N-B' units will not work. Email is open. My email IS open this time.... ; > )

    OEM FORD 9N-10000-C GENERATOR WITH BELT TENSIONER OPTION NOTE STEEL BAND:

    OEM FORD 2N-10000 GENERATOR WITH BELT TENSIONER ATTACHED:



    Tim Daley(MI)

    [Back] [Return to Top of Forum]


    Top