Posted by BBB on June 14, 2007 at 12:05:27 [URL] [DELETE] :
In Reply to: Re: lower link support shaft posted by don b on June 05, 2007 at 12:10:59:
I think Don B is right. I have had several people tell me they could reach the nut by removing the pto shaft, but I couldn't. I had to remove the whole trumpet assembly to replace mine. If it is leaking from the bolts, they are a press taper fit, and if the hole has wallowed some, you will need to repair the hole. I used JB weld and so far it is still holding.
Posting not permitted in the forum archives.