Implements Forum - Expanded Thread Page

Subject: PHD Hook up problem

[Back] [Return to Top of Forum]

Charles Miller    Posted 01-10-2019 at 12:25:50 [URL] [DELETE]        [Reply] [Email]  
  • PHD Hook up problem
  • Just bought a 70's era Danuser PHD. I hooked it up and the lift bars seem high enough but the PHD are not. The 42" auger will not clear the ground. The angle of the boom does not seem right. I hooked up to the top hole on the top link. Will this work on my 8N or am I not doing it right. Any help would be most apppreciated.

    Farmer Dan    Posted 01-10-2019 at 18:14:52 [URL] [DELETE]        [Reply] [Email]  
  • Re: PHD Hook up problem
  • Used a Danhouser on my 9N, bottom hole on the rocker and 36"x10" auger. No problems

    Charles    Posted 01-14-2019 at 13:09:03 [URL] [DELETE]        [Reply] [Email]  
  • Re: PHD Hook up problem
  • The hook problem is solved. Thanks Farmer Dan for your post!

    Farmer Dan    Posted 01-14-2019 at 13:56:27 [URL] [DELETE]        [Reply] [Email]  
  • Re: PHD Hook up problem
  • Glad you go it working.

    Charles    Posted 01-11-2019 at 13:12:24 [URL] [DELETE]        [Reply] [Email]  
  • Re: PHD Hook up problem
  • Great! I will try it out. I will let you know it works. Thanks.

    [Back] [Return to Top of Forum]